Is it okay to use different service group numbers?

A new deployment of vWAAS in a DC connected to a Cat 6509 with existing WCCP redierection from an old WAAS deployment on that switch using service groups 61 and 62. I have researched service group numbers but only find a handful and want to ask the community if there are any issues using service groups 51 and 52, or 71 and 72 for this new deployment.
Thanks, Karl

Hi Karl,
Service groups 61 and 62 are tcp promiscous groups and will redirect all TCP traffic. Also, in case of the wccp web-cache , this is going to redirect all the traffic from TCP port 80 from routers to Cisco Cache/ACNS devices. Other Custom WCCP services c will use custom wccp number (90 - 97) . So if you want to redirect port 8080 you can use custom WCCP service group.
Some of the well known service groups are listed below and you can use which ever you want according to your requirement.
Service Name
Service Number
Protocol
Port
Priority
web-cache
0
tcp
80
240
dns
53
udp
53
202
ftp-native
60
tcp
200
tcp-promiscuous
61
tcp
34
tcp-promiscuous
62
tcp
34
https-cache
70
tcp
443
231
rtsp
80
tcp
554
200
wmt
81
tcp
1755
201
mmsu
82
udp
1755
201
rtspu
83
udp
5005
201
cifs-cache
89
tcp
139, 445
224
custom
90
220
custom
91
221
custom
92
222
custom
93
223
custom
94
224
custom
95
225
custom
96
226
custom
97
227
custom-web-cache
98
tcp
80
230
reverse-proxy
99
tcp
80
235
Regards,
Kanwal

Similar Messages

  • HT4968 How to Create Birthday Calendars using different contact groups.

    I am trying to create photo calendars as a gift including birthdays using either iCloud or iPhoto 11. However each calendar is different - do not want all birthdays on all calendars. I've tried creating separate contact groups but it seems they all appear no matter what. Isn't there a way to create a master birthday list and assign each person to the calendars that I want the birthday to appear on?
    I am using Mac OS X 10.8.5 and have Adobe Creative Cloud, iPhoto, etc.

    Hi Chirag,
    I've read the following link, but the question is....
    - Where is the link to create transport groups? That is my only question It's as easy as that
    Found it...sorry I knew it was easy
    Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM

  • How to change system/service groups in ESB through build file in Antscripts

    Hi All,
    i have a proublem with Ant Scripts .
    I Create a "IClickSystemESB" process that will define different systems for the project. and Create "IClickServiceGroupESB" process This will define different service groups under the systems for the project. and then Create a TestSysServiceESB process This process should use the system/servicegroups.
    During deployment of TestSysServiceESB the build file should be able to change the system /service groups to which the process is attached.
    Anyone can help me.
    Regards
    Hari
    Edited by: user10222248 on 19 Feb, 2009 3:02 AM

    Check out configuration plan feature in soa suite 11g. One of the reference is here @ http://biemond.blogspot.com/2010/02/web-service-references-and-soa.html

  • Stock report for single material contains different material groups

    Hi Experts,
                  I have a scenario.I want to maintain material group for a material at the time of po creation.In next time i will maintain different material group for the same material.
                   But I want to view the the stocks for material group wise which i entered in po.Is it possible to achieve this?
                  Please suggest solution.
    Thanks & Regards,
    Deepika.

    Please read the KBA document  2012912 - Changeablility of the field "material group" in purchasing documents
    It clearly says that material group can't be changed in case you will use material master in purchase order.
    So, it is clear that you can't use different material group for material master in purchase order.
    For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO).

  • Same number range for two different series groups?

    Dear all,
    There are two scenarios
    1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
    2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
    But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case)  as per excise legal requirement
    Ie running number is for series group 20 is 300016
    For the above deemed exp case (second scenario)it should pickup 300017
    And again when they do under bond case(first scenario), it should pick up 300018 like that
    Is it possible to maintain the same number range for two different series groups(20 and 30)?
    Even if you maintain the same number range for 30, as per running number range of 20
    Will the system update simultaneously the same number range for 20 and 30 series groups?
    Please suggest the way.

    With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
    Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
    Regards,
    Aroop

  • Issue with Service Group Configuration for a BPM Process

    Hi,
    I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
    After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
    url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
    I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
    Regards
    Suresh

    Hi Suresh,
    i just got an answer on my ticket. Here it is:
    There is a known issue with the upper case of the endpoint published in
    the Services Registry and in the WSDL.
    Before SP2 the matching for the binding for invocation is done
    by the endpoint url. There is a known issue that the endpoint published
    in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
    the Services Registry is as shown in the exception above:
    http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
    but in the WSDL the endpoint url is with upper case of the endpoint:
    ../ECC_SRVCREQCRTRC/..
    Because of this difference the call fails. This is fixed is 711 SP2.
    Workaround for this is if you create a Provider System based on your
    WSDL, not a Services Registry one.
    Hope that helps...
    Best regards
    Michael

  • How to create different Graphs in SharePoint 2013 without using Excel service?

    Hi All,
    I want to create different graphs in SharePoint without using Excel Service.
    I do not want to create excel and then upload that to SharePoint.
    Any one knows how to do that? Isthere any option to do that?
    Thanks in Advance

    Hi Darsh,
    You can use
    SharePoint chart webpart to display charts. Or you can use any jQuery charting library and feed data using JSOM or REST. Ex. high charts:
    http://www.highcharts.com/products/highcharts
    http://office.microsoft.com/en-us/sharepoint-server-help/sharepoint-lists-vi-exciting-ways-to-display-your-list-data-RZ102425636.aspx?section=3
    Best Regards,
    Brij K

  • Executing a Job via Web Services using a Server Group?

    When executing a job from Designer or from the Management Console you have the option to select a specific job server or a server group.
    But when executing a job via Web Services it uses the first job server with which the repository was associated (i.e. the first job server listed in AL_MACHINE_INFO).
    Is there a way to get the job to execute using a server group instead simply choosing the first job server in the list?
    Note: We are using FIM to execute the jobs via web services and don't have access to additional parameters.

    Joe
    Here is the where you can change the server group/job server.
    - After you add the Batch/real Time job as a webservice.
    - Go to the Webservice Batch Job Attribute and from the drop down choose the "Enable job Attributes" and hit apply.
    - After this if you use the WSDL URL http://<Data Services Web Server>:<Web server Port>/DataServices/servlet/webservices?ver=2.0&wsdlxml
    - You will see the job attributes that you can change based on the allowed parameters mentioned in the documentation.
    The batch job or real time job is published without the job parameters by default. Once you enable the job attributes, remove and re publish the batch job as a web service. The application making the call to this webservice should be able to read the WSDL generated by Data services and pickup all the input and output parameters of the method.
    Refer to the Data Services Integrator guide (Chapter 3 : pages 25 - 33 ) to get the exact parameter values permitted via Data Services jobs called via web services.
    Hope this helps!
    Thanks & Regards
    Tiji

  • Use of Different Account Groups?

    Hi Gurus,
    Please tell me what is the use of making different Accounts groups?
    If we make different account groups, what will be the impact in balance sheet?
    Please revert asap.
    Thank YOu

    Hi Gverma,
    You can define any number of hierarchical structures of accounts for use in the information system, allocations and planning. These structures are called "account groups". You can create new account groups as well as display or change existing ones. If you want to use the same account groups in Profit Center Accounting that you have already created in Cost Center Accounting, you can copy them to Profit Center Accounting. The same goes for balance sheet account groups that you already created in Financial Accounting.
    Each account group is assigned to a chart of accounts. You can only use an account group in multiple controlling areas if those controlling areas use the same chart of accounts.
    please also check the  following links:
    http://help.sap.com/saphelp_47x200/helpdata/en/53/c98647ca3711d2b494006094b9114a/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/eb/13717743c411d1896f0000e8322d00/frameset.htm

  • Can CSS115XX have 2 service group with different upstream?

    Hi,
      Just to ask if CSS can support the architect that 2 service group with different upstream.
      It seems if I set a default route then I can have only one upstream routing path.
      Thanks.

    you can configure mulitple gateway/upstream.
    The CSS by default select the correct route....the one that corresponds to the inbound request.
    So, if request came in from upstream-A the response will be sent through that same upstream.
    This behavior can be modified with the following command :
    CSS11503-2(config)# ip ecmp ?
      address             Choose among alternate paths based on IP addresses
      no-prefer-ingress   Do not prefer the ingress port for the reverse path
                          egress
      roundrobin          Alternate between equal paths in a roundrobin fashion
    CSS11503-2(config)# ip ecmp
    Gilles.

  • Create different network share shortcut in desktop for different security groups using GPO

    Hi,
     I have an OU named TECH that contains two different security groups ENG and PRESS.
    When users in ENG group logs in desktop should show a network share \\server1\eng-share and 
    when users in PRESS group logs in desktop should show a network share \\server1\press-share.
    How to create a GPO for this ?
    regards, Faisal

    You could use group policy preferences shortcuts. You would create a shortcut to each of these shares and then use Item Level Targeting. The target would point to the security group needed.
    If my answer helped you, check out my blog:
    DeployHappiness. Subscribe by
    RSS or
    email. 

  • Using several UMTS access points (APN) for different services

    Hello,
    I wonder if it is possible to use several UMTS access points (APN) for different services.
    situation:
    1) The iPhone is used for business AND private purposes.
    2) The company's mobile telephone contract includes a APN, which is only usable by the employees' mobile phones.
    problem / question:
    Is it possible to define two access points in the iPhone, that for example the exchange account uses the company's APN, while all the other apps use the standard APN of the carrier?
    Problem is, that some iPhone's benefits like Push-Messages are blocked by the carrier's APN. Now, I have to switch the access point by installing the appropriate profile every time I want to check my e-mails or vice versa for using "normal" apps.
    I hope you can hep me.
    Greets from Germany
    Mitch

    Thanks for your help! This really helps a lot! We actually only want to replace the autonmous access point with the controller solution and make one WLAN available at another site. From what I can see, this is possible with our current solution - we just need to switch from Layer 2 to Layer 3 and purchase the corresponding amount of supported Access Points (I think we should be able to get some refurbished ones).
    Am I correct in assuming that the Access Points we want to replace (AIR-AP1230B-E-K9 with 802.11b radio only) cannot be upgraded to lightweight ones? Since if I understood document http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html correctly, this is not possible with access points that only have 802.11b radios.
    Regarding the switch from Layer 2 to Layer 3: Do we really only need to perform the steps I described in my first post?
    And one last question regarding REAP. As far as I understood this is only needed when local traffic needs to be maintained in case the connection to the WLC becomes unavailable. So we really don't need it if we want to access resources that are only available over the WLC?
    Thanks again for your help!
    Michael

  • I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

    I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Regarding the use of different services for different parts in the same display layout

    hi,
    i am trying to design an application using flex at the frontend and in the gui what i have designed i have the upper portion consisting of four panels
    displaying the critical events at real time whereas in the lower half of the gui design i have designed something that based on the user provided input the
    the information should be displayed in the lower half of the gui design layout.i just wanted to know whether it is possible to use two services like request response http based service for the lower half and real time data pushing using either amf or amfx or http with polling in the upper half.but i want them to be displayed on the same gui.
    thanks

    Hi,
    Please refer the below link:-
    http://www.sap-img.com/sap-sd/sap-sd-cin-configuration.htm
    Thanks & Regards,
    Rahul Verulkar

  • Error when using service groups

    Hello,
    When i try to configure service groups, wich i need in my bpm process, i always get an error message:
       An Unexpected ER Technical Exception occurred
    Service-Definition with name "2a4dec73:1242bb78370:3b04_webservice" don't exsists
    I tried it under SOA Managament -> Application and Scenario Communication ->      Application Communication.
    Till now i called web services always with logial destinations...
    Edited by: tw18399 on Oct 12, 2009 1:23 PM

    Hi,
    Instead of going for SOA Managament -> Application and Scenario Communication -> Application Communication. Try to do the configurations in Business Scenario Communication.
    To know how to do these configurations refer this article:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/501bd56f-a5a6-2b10-4fbf-a61a64055fe4&overridelayout=true
    Regards,
    Gayathri

Maybe you are looking for