Is it okay to use your new iPod Touch before charging it for the first time? I did and then listened to it while charging and syncing. Thanks

Just got the 5G Touch. I turned it on and was using the camera and stuff before I charged it for the first time. Then while charging, I listened to the music I was syncing through the speakers. This okay? I remember reading to always charge full before ever doing anything on them. Doesnt say anything in the startup manual though.
Thanks guys.

Should be OK. Just make sure that the iPod is charging.

Similar Messages

Used my girlfriends computer to start my iPad for the first time I was logged into my iTunes account. Now her iTunes in the user on my iPad how do I change it to mine.

Used my girlfriends computer to start my iPad for the first time. I logged into my itunes account. Now the iPad has her iTunes account on it. How do I change it to mine.

You can log out of her account by tapping on the id on the right-hand side of Settings > Store and you can then log in with your id - is that what you want to do ?

TS3772 Hi Team, I fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to vi

Hi Team, I am fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to play movie, any help please for someone who hasnt got a clue

where did you download the movie from?
what is it doing when it wont allow you to play the movie?
since you downloaded quicktime is it still asking you to download quicktime?

Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

The other Allan is being facetious--you somehow found the forum for pre-2006 eMac desktop computers that gets little traffic.
Getting you moved to the iPhone forums.

Plugging Ipod nano(4th gen) in for the first time... Help

I have the ipod nano 4th gen. I plugged it into the computer for the first time, and itunes comes up. It then says you can register now or later I just clicked later(I am actually doing this for my sister, I have and ipod touch that I did the same with) But anyways, I clicked register later, and then it tells me that I have to Read and agree to the software(or something on that order) So I read through all of that and at the end, there is a box you can check to say that you have read and agreed. I did that, but then you have to click a button to confirm/continue im guessing. Well, my problem is, that my computer screen is too small for me to see the button, in other words, I cant confirm/continue and am stuck there, I cant do anything else with the ipod with out continuing this step. I have tried to Maxamize the screen and dragging over. nothing seems to work.
Is there any other day to agree and confirm to this? If there isn't, is there a way that I can get to the confirm/continue button?

I changed my screen resolution to 1024 x 768,
yet I still cannot see the confirm/continue option.
I have tried all screen resolutions,
and I'm not able to see the button.
Am I doing something wrong?
I really need to know,
because I need to use my iPod.

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

Having problems with my new iPod touch can you help me a first time user?

I cannot locate my photos in the iTunes library, I have no problem with the Music entry, is there something I have to do to create a library entry?
Also I do not get the photo folders only the individual photos in one large file (3500+) good quality but not good for specific look up, again is there anything I need to do to have folder organization?
I'd appreciate any help that I can get, and would thank any particant in advance

Hi Kappy. I have located the photo files from the sync to my ipod, by the way I am a Windows XP user, and what is showing is a file called 'ipod Photo Cache' which contains folders which have the photo conversions of what is in my 'My Pictures' folder, this cache folder follows at the end of my photo library content.
The cache folder files have an extension of .thumb these are conversions for the ipod and appear to change when I delete or modify any photo in my library and to further complicate things these photos (.JPG format) have an intermediate conversion to a (.cpt format)which are contained within my photo library folders. None of this bothers me since I have my photos on the ipod which is of great value to me.
Thanks for your efforts on my behalf, I will now let this rest and proceed to other new challenges in the ipod world.
Message was edited by: Bill of Fife

Can you exchange a new iPod Touch 4G 32 gb for the new one when it comes out?

I ordered one using points from my credit card, so I want to know if I can I exchange it for the 5 when it comes out??

If you purchased it within the last 14 days you can return it for a full refund and then purchase the 5G. Otherwise Apple will only give you a 10% recycling discount if you turn in an old iPod and purchase a new one.

News Feeds module crashes upon loading for the first time

The Blackberry OEM News Feeder app crashes on my Torch every time I try to open it. It has never been able to open. I tried removing and re-downloading it several times. I also reset the security to allow everything over custom. Nothing seems to work. The error I continue to receive is as follows: Error starting net_rim_bb_news_app: error loading module 'net_rim_bb_news_app' Verify error. Any help would be appreciated.

Hello jmlucas71 and welcome to the BlackBerry Support Community Forums.
I would suggest backing up your BlackBerry device and doing a clean software as shown in KB11320
Before any data is restored, test the News Feeds application.
Let me know how you make out.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Will i be able to use my iMac whilst it backs up with for the first time?

I have a new Time Capsule so will i be able to access internet, iTunes etc whilst it backs up or will i have to just sit and watch TV instead!

Thanks for that
I did think that may be the best idea but then if an error message comes up will it be ok being left for hours with an 'issue' ?

Can i use my iphone while its charging for the first time

i just got the iphone 6. when i turned it on for the first time it had like half battery, i let it fully die and now im charging it for the first time. can i use it while its charging? every phone ive ever had had such a crappy battery life. i wanna finally have a good battery! lol

Anson Luk wrote:
Hi. Sure, you can use your iPhone when charging (but not always) . Just release your battery under 10% and recharge to 100% once a month, it can be helpful for battery life.
That is actually not considered best practice. Lithium ion batteries should be kept topped up when possible. That was previously recommended to calibrate the battery sensor. It never had any effect on the overall life of the battery.

Itunes keeps saying "welcome to your new ipod touch."

I updated itunes and all, and my iPod touch shows up in "My Computer" but I want to add a movie to my iPod Touch but I am unable to because everytime I plug in my ipod to my computer and go to itunes it says "welcome to your new iPod Touch."

Hello Mike,
Congratulations on your new iPod touch! When you connect an iPod touch to iTunes for the first time, it gives you the welcome screen, but there should also be a button that says "Continue" or "Get Started" that you can click on to continue with syncing.
Once you have clicked on one of those buttons, you can continue with the steps in the following article to sync content to your new iPod:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thank you for using Apple Support Communities.
Best,
Sheila M.

S my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!

Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT1414 I was using my new iPod touch when...

I was using my new iPod Touch when the screen suddenly turned unresponsive, after a dozen seconds the iPod's screen turned white with colored lines. It is unresponsive and won't allow me to reset it from my computer. I was using an app and I want my iPod to work! Please help, I have many personal videos that to me seem more valuable than the device itself, please help!!!

- Try here:
iOS: Not responding or does not turn on
- If not successful and you can't turn it off then let the battery fully drain. After charging for at least an hour try again.
- If still unsuccessful then time for an appointment at the Genius Bar of an Apple store.

HT204070 my new Ipod touch 5 won't accept the password to my wifi. I've been trying for an hour. retyping, checking the password on the router and retyping again. can someone help?

the new Ipod touch 5 will not accept the password that is on the router for my wifi. what do I do? there don't seem to be any options and I cannot connect to our Wifi in our home

I agree with the Thomas, in that I think you have mucked up your settings in the AOL account. Your username should be something like - [email protected] Your password is whatever you use as the password.
You could try deleting the account and start over again. Here is a link to a "how to set up AOL email " on the iPad. It is 4 or 5 step process and just make sure that you are entering the correct information in the correct fields in the set up. Among my 4 email accounts on my iPad, I have 2 AOL accounts. I have no problems at all and it was really very easy to set up. There is no reason why AOL email should not work on your iPad.
To repeat and emphasize - Just make sure that you are entering the correct information in the appropriate fields as I think that's where you are making your mistakes.
If I had my choice, I would probably chuck the AOL accounts as well, but I have all the spam filters set as high as I can on the server, and it has cut down tremendously on the spam. Unfortunately - we set up AOL accounts at my workplace years ago and I really hesitate to change them now, so I continue on with these, but like I said, they work fine and they were very easy to set up.
http://convert-dvd-ipad.com/dvdipad/set-aol-email-account-ipad-manually/

Is it okay to use your new iPod Touch before charging it for the first time? I did and then listened to it while charging and syncing. Thanks

Similar Messages

Maybe you are looking for