Is it okay to "wall-mount" an Airport Time Capsule sideways?

Just bought a new Airport Time Capsule to replace an older "flying saucer" Airport Express. Is it okay to mount the ATC sideways? My main concern is the internal HD. is there a problem with an HD spinning sideways over an extended period of time? Any other reason I should not mount it sideways?
A bit more explanation (only if you are wondering why I need to mount it sideways):
I need to mount the ATC on a wall because placing it in the hallway is the only way I get full signal strength throughout my apartment (old building with thick walls and lots of corners). I am using the old AE mounting bracket with zip ties, at least until I can determine a better way and/or location. Sideways mount determined by how the mount works and how the wiring is fed into the unit. I guess Apple decided that users would simply put these things on their desks or bookshelves.
Thanks in advance!

Thanks Bob, I just got off the phone with Applecare, and they said for optimal signal strength, the unit should be mounted upright. But I was told if I am getting a good signal as set up, there's no reason to change it since there is no risk to the HD.
Regarding airflow—good point. I did take that into consideration. The vents appear to be on the bottom of the unit, so mounting the unit sideways leaves that surface completely open. So I don't think airflow would be impeded. Here, I am making an assumption about how the engineers intended the ATC to work. When I have the time, I'll build a small shelf to wall mount the unit in it's upright position.
Thanks—this is the type of info I am looking for. I'd like the unit to last a while before I have to replace it.

Similar Messages

  • Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

    It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
    Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
    I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!  

    The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
    Very sorry for you.. it is one big danger when you encrypt.
    Reset to factory.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
    Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

  • Airport Time capsule not found on mac when using AirPort Utility

    I just purchased an AirPort Time Capsule to back up my files from my Mac.  I have been able to set up the wireless portion, but when trying to access the backup portion through TimeMachine I cannot select my base.  I am able to see it on my iPhone, but not on Mac.  I have updated everything.  Is this a known problem with the transition to Yosemite?  Any suggestions?

    Dead spot on.. Yosemite is pain plus..
    I recommend you start over in your TC setup..
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.

  • How to use airport time capsule with multiple computers?

    I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
    I bought the AirPort Time Capsule to back up my MBP
    And so i did.
    then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
    I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
    Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails.  It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
    this is what i want:
    i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
    i want to make a new back up of my MBP as if it's a second computer...
    so guys and girls, what is the easiest and best solution?
    Best regards!

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • How do I use my airport time capsule extreme as a external hard drive

    How do I access files and save files to my airport time capsule like its an external HD.  How do I access the external HD that is connected to the time capsule?Ai

    The TC is no different to any other network drive... you mount the drive and copy the files to it.. or copy files from it.
    Same with USB drive plugged into the TC.
    BUT.. TC is not suitable for live files.. ie files you are actively editing and working on. It is storage.. not working disk space.. and the USB drive more so.. it is slow.. much slower than same USB plugged into the computer by at least half.
    And USB 2 wasn't that quick to begin with. The TC itself is slow.. although over wireless it is actually wireless that is the hold up.
    Here is what I normally say for this question. It is asked every day.. often several times.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup. You will also need a USB drive somewhere else in the network to act as target for backups.. and if you use the TC itself over wireless you will experience a new definition of pain and suffering.. slow.. extremely slow..
    (cf Belly of the sarlacc http://starwars.wikia.com/wiki/Sarlacc)
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

    I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

    Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
    So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
    The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
    Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
    Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
    Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
    Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
    You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
    Continuing with the instructions on page 12 of the Setup Guide......
    1. Open AirPort Utility on your Mac.  It is located as follows:  Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
    2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
    So, clicking on the WiFi icon will yield a small window that looks like this:
    The example below shows an AirPort Extreme.  You will see Time Capsule on your screen. Click on Time Capsule.
    When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
    3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
    Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
    Base Station Name....Type in a simple name that you want to call the Time Capsule.  Mine is TC, for example.
    Password...................Type in a password that will be used for both the network and the Time Capsule.  Write that down.
    Verify..........................Type in the password again to Verify
    Click Next
    The setup wizard will configure everything for you. When you see the message of Setup  Complete, click Done.
    The Time Capsule is now set up and it will display a green light.

  • How do I connect both iMac (2011) hard drives to backup with Time Machine and Airport Time capsule?

    Hi - my iMac has 2 hard drives, 250 Gb solid state and a 2 Tb drive.  I'm backing up using time Machine to an Airport time Capsule but only the 250 Gb drive comes up in hte list?  All my photos are on the 2 Tb drive (about 120GB worth) and I want a back up for these. I'm running under OS X 10.9.1 Maverick
    Any help would be greatly appreaciated!

    Ok.. I am surprised..
    What did you format the 2TB drive.. I find it hard to imagine you formatted an internal drive anything but Mac OS extended journaled (HFS+) .. but you could have.
    Time Machine can only backup HFS+ format drives.
    Of course this Mavericks.. and in Mavericks the bugs rein supreme in Time Machine.
    Reset TM setup.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Make sure the 2TB drive is mounted when you redo the TM setup.
    To be honest.. I would also buy CCC and do a full clone of the drive..
    TM is great for the occasional file loss.. but it is lousy to restore a drive. CCC at the moment is $40 or so and IMHO money well spent.
    http://www.bombich.com/
    I use it but just to say I have no connection to them..

  • How to use Airport Time Capsule as a wireless hard drive?

    I have purchased the Airport Time Capsule 3TB but I really don't need a backup disk, so I want to use it as a wireless hard disk to be used in my network, how can I do this?  Can someone give me a clear step by step guide of how I can do this?
    I appreciate your help and support.

    There is no difference between using the TC as a backup or as a network disk.
    Mount the disk in finder.
    Copy files to it and from it.. in exactly the same way you copy files between disks in a Mac.
    As a file store the TC is not good.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • How can I make my new AirPort Time Capsule with VOIP?

    I purchased an AirPort Time Capsule because of the modem capability. The modem we have from the phone company isn't very good.
    Now I have a little problem. I forgot we have our phone over internet and I cannot figure out how to set it all up.
    Any ideas for my latest problem? I'd run back to the store/genius bar, but it's a ferry ride away and I'm not sure it would do any good to go back because all my phone "stuff" (cords, etc) wall jacks, is all here.
    Current set up is this:
    Modem box has ethernet (yellow) cable going from it to imac. It also has blue cable going from it to ATA Router (smaller black box). Each box (white larger "modem" box, and black smaller ATA Router) have a phone cord going from wall (2 separate jacks) to the box. And obviously each has it's own power cord.
    I tried moving all plugs from white modem box to AP TC, but there really isn't a phone jack on back of APTC. It clicked in place in one of the <--> ports, but I'm getting a flashing amber light on the front, and no internet connection.
    Any ideas for my latest issue?? I know so much more about computers than I ever wanted to know, but it obviously isn't enough.
    Thanks!

    I purchased an AirPort Time Capsule because of the modem capability.
    There is no modem in the airport routers.. they are all plain ethernet routers.
    It sounds like you have adsl modem.. and I would just leave it alone.
    But if you want to play and your ISP supports PPPOE and the modem allows bridging or bridge mode.. then you can bridge the modem and use TC to establish the link to the ISP.. on the internet tab use PPPOE and put in your ISP username and password.
    You can then plug the ATA into one of the LAN ports of the TC.
    Overall this is probably not a great idea.
    Exactly what modem are you talking about .. make and model from the base please?? Who is your ISP?
    What model is the ATA? Actual model numbers from it please.
    Generally you will plug the TC into the modem and use simple bridge mode.
    Even though the airport wizard might attempt to take over as main router.. please do the setup manually and choose bridge mode.
    See Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • Is the AirPort Time Capsule only for backing up Macs or can I back up additional files from SD cards too as if it were an external hard drive?

    I'm a professional photographer and I'm interested in the most recent features of the AirPort Time Capsule. I process a lot of data and much of it never hits my Mac hard drive. Currently I back up to external hard drives, but is it possible to back up files from SD cards mounted on my desktop on to the AirPort Time Capsule for instant access in the future as if the drive were an external hard drive (in addition to being a back up server)?
    I appreciate input!

    If your question is whether Time Machine can back up the data on the SD drives, the answer would be no.
    The reason for this is that SD drives are formatted in Windows FAT16, which is not compatible with Time Machine, the backup application included with Macs.

  • Using Airport Time Capsule with an external usb hard drive - how to connect

    I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
    I have an old MacBook Pro running 10.6.8  and which is also connected to my T/C via wi-fi - again no problems.
    But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
    Now the problem I have is trying to set it up,  the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it,  the newer version doesn’t work on the MBP only  the iMac.
    A catch 22 situation. If I continue and and go to “manual setup” then try  update, all I get is “correct the problem before updating”  (Allow setup over the internet using Bonjour).
    Anyone have any ideas or images that I can view to try and get things going?
    I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
    Alan

    I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
    You are first mounting the drive on the desktop, correct?
    Not sure what you mean here.
    You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
    Or, double click the drive icon on the desktop and drag/drop files into the open window there.
    Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

  • How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
    You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
    As far as mounting the TC..
    In finder use Go, Connect to server.. and type.
    AFP://TCname or TCipaddress
    Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
    Fred Blog's Time Capsule 2445566.
    It is too long.. it has spaces and it has non-alphanumeric characters.
    Shorten it to FredTC
    No spaces no characters that are NOT alphanumeric.
    TCIPaddress is simply the standard IP.
    You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
    But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

  • XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

    Okay folks, I need your help out there.
    So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
    I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
    Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
    I know it seems confusing, but thats the best i can describe it.
    tthanks all

    Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
    So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
    You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
    OR
    Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
    I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
    This is a good basic post for older xbox.
    https://discussions.apple.com/thread/5385065?tstart=0

Maybe you are looking for