Is it only pc's that need to be authorized or does it include itouch,ipads,macbook?

Hi Is it only pc's that need to be authorized? does this include itouches, ipads,macbook,tablet by otherthan apple?

Thank you for the quick responce. You helped alot. thank you

Similar Messages

Selecting ONLY those fiels that need metadata written?

How do I select ONLY those images that need the metadata written? I've got 40,000 images, change a number of keywords for different groups - add, delete, rename, whatever. I DON'T want to have to save metadata for all 40,00 files 'cause LR is already so slow... And doing a save metadata for every group I change is painful 'cause it takes foreve just to update even a few files. I've got the preference turned on to automatically write changes to xmp, but I'm not working with anything that has sidecar files...
I want to be able to JUST select those images that need the metadata written out, then let it spend all night writing the changes.

Thanks Lee... But, that doesn't appear to be what I'm seeing. I've got autowrite on (at least as far as I know I do), but I can watch a set of files where I've made changes to keywords and even after all activity has stopped there'll be files with the metadata indicator showing they haven't been synchronized with the disk.... AND, I can go to Bridge and open one of these files and see that the keywords haven't been updated on the disk......
So, even though I have autowrite on, I can't be SURE the changes actually got written. And last night I selected everything and did a "Save metadata"... Just over 12 HOURS later it was at the 3% completed... This was on a catalog of approximately 35,000 images.
This is why I'd like to be able to just select those images needing updating. Hopefully, it'd be faster.

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
Ross Hunter

I have a 21" Samsung monitor that needs 1680x1050 resolution. Do not have in my 13" MacBook Pro os 10.8.2. Can I get app that will give me monitor resolution

I have a 21" Samsung monitor that needs a 1680x1050 resolution connected to a 13" MacBook Pro os 10.8.2. My display preferences do not offer this resolution. Is there an app. that will give me this resolution or other way to solve this problem. Thanks, JHM

Uninstall Genieo:
http://www.thesafemac.com/arg-genieo/
See if that makes a difference.
Ciao.
DawnHerbie wrote:
Also is Safeboot ok to use?
Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
Message was edited by: OGELTHORPE

My iPad will connect to wifi and safari works but all apps that need an Internet connection won't load including iTunes?

Google on safari works on my iPad but everything else that needs Internet won't even load? Is there anything I can do?

Have you tried a restart?
Simultaneously press and hold the Home and Power buttons on your iPad. Do not release them until you see the Apple Logo. Be patient because it takes about 10-15 seconds. Try again and let us know if this helped or not.

If your iPad has a dent that effect the functioning of something does apple keep the iPad to work on it?

I recently noticed that a dent was on the side of my iPad that effects the proper functioning of the volume controls. I have AppleCare on my iPad. But will apple keep my iPad to work on it?
Thank you in advance!

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

When someone messages you from their iPhone or iPad, you receive the message to your iPhone (or iPad) but you don't know whether it is from their iPhone or iPad because all your iPhone sees is one contact. That needs to be updated.

When someone messages you from their iPhone or iPad you receive the message to your iPhone or iPad but you don't know whether it is from their iPhone or their iPad. That needs to be updated.

Why does it matter?
It's the person who sent the message that is important, not which particular device they used to send it, surely?
When someone calls you from their home landland, is it necessary to know whether they're calling you from the phone in the kitchen, or the one in the bedroom?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps.

Elements that need to be paid only through Cheque

Hi all,
I'm on R12 International HRMS.
I have a few Elements that need to be paid only through Cheque.
These elements are run separately as a quick pay or by selecting an element set and assignment set and run the payroll process separately.
What is the best approach to go about this requirement.
The default payment type defined is Cash Type.
How can I make sure the payment for these element is always Cheque
And also how do I customize the Cheque Writer(Generic) Process to include my design of the cheque.
Thanks

If you are using Assignment set , run the payroll using assignment set and after that run cheque writer and make sure u did not add
any bank details to him , it will pay by cheque as per my understanding

Need to display records only once for that particular group

Hi,
I have a requirement like displaying repeated records only once for that particular group.
For eg, in the emp table, I need to display repeated deptno only once for the particular group of job.
And for the above requirement I have used the below query,
SELECT empno, DECODE (LAG (job, 1) OVER (ORDER BY job), job, NULL, job),
DECODE (LAG (deptno, 1) OVER (ORDER BY deptno), deptno, NULL, deptno)
FROM emp;
Output:
EMPNO     JOB     DEPTNO
7782          10
7934     CLERK
7839     PRESIDENT
7876          20
7788
7902     ANALYST
7566     MANAGER
7844          30
7900
7654     SALESMAN
7698
But in the above output you can find that, say deptno 10 is getting displayed only once, whereas I want that deptno 10 to be checked whether it is getting repeated within the group of JOB and than hide the deptno 10 only if it is repeated within that job group. If not, deptno 10 should be displayed again.
Please help me in this.
Regards,
Shiva

Hi,
Hope the below helps.
SELECT emp_id, job, deptno,
       CASE WHEN LAG(deptno, 1) OVER (partition by job order by deptno) = deptno THEN null else deptno end
FROM empRegards
Ameya

HT5544 Dear Sir, is that only pdf format document which can import to ibook ? I have some word and powerpoint, which i want to use ibook for reading, is that needed to change to pdf ? thanks a lot.

as caption, thanks help !

Hello bykwong
iBooks supports ePub and most PDF’s as far as reading items outside of the iBooks Store and would need to export them as a pdf to sync them across. Also as an alternative Microsoft does make Word for iPad to read the documents. If you want to write and edit them, then there is a subscription that can allows that for you. Pages for iOS also has a new feature to where you can have word documents and keep them as view only option for when sharing out the document.
iBooks and the iBooks Store
http://support.apple.com/kb/ht4059
Microsoft Word for iPad
https://itunes.apple.com/us/app/microsoft-word-for-ipad/id586447913?mt=8
Pages
https://itunes.apple.com/us/app/pages/id361309726?mt=8
Regards,
-Norm G.

Is it only some type of apps that need a intel update...

reason and ableton needed an update but office seems to work......is it only certain type of apps.....does an old version of creative suite run on intel macs or is that one that needs an update? is there a universal binary discussion page ...cannt see it?

Most applications use general frameworks that are available within Mac OS X for a lot of what they do. Any such app will work with Rosetta just fine.
Ableton and Reason, along with Protools, Logic, and probably Digital Performer being audio applications require some pretty interesting tweaks to ensure the best performance. As such they sometimes do things with unusual frameworks, create their own frameworks, or occasionally directly access specific abilities of specific hardware. All of those applications surely were tweaked to do certain functions directly on the PPC chip, many utilizing Altivec.
As such they might not be compatible with Rosetta if Apple didn't include those specific chip features knowing that only a small handful of developers where accessing them. It breaks a few programs, but if it only effected a handful of developers out of thousands, and saved Apple a lot of time in development and support they would think it worthwhile.
Especially when you consider that all the Audio and Video vendors really appreciate the performance they can squeeze from the Core Duo chips, so they all started updating as quickly as they could.

I bought I pod first generation but I can't use it cause need iOS 7 in my I pod first gen always said that need to up grade I bring already to I phone shope but always said sorry cause I pod first until iOS 5 only now need iOS 7

Pls help I have I pod first generation but I can't use it cause always saying that need to upgrade to iOS 7 but when I bring this to apple shoppe they said sooty I pos first generation up to 5ios only until now I can't use this I pod

You can use it as you did with the older Apps written that support iOS 5.x, nothing has changed there. However, if you want to run the newest apps and/or those that require a higher iOS version, bottom line is that you'll need to purchase a new iPad that will be capable of running that iOS and apps.
It wouldn't make any sense for Apple to allow iOS 7 to run on a 1st Gen iPad and have dismal performance. I certainly wouldn't be too happy about it. Hardware advances very rapidly...that's a fact of life if you're going to use any type of device that has a chip inside of it.

After downloading the latest osx update I find that my speech alerts only work on things that need attention but won't work when I get mail. I am using Gmail and it was ok before I updated, has anyone else had this problem ?

After downloading the last OS X update ,I can no longer get the speech to work in my gmail account to tell me I have mail
It will alert me to anything that needs attention except mail
any ideas would be appreciated

bryan123 wrote:
After downloading the last OS X update ,I can no longer get the speech to work in my gmail account to tell me I have mail
It will alert me to anything that needs attention except mail
any ideas would be appreciated
imac, Mac OS X (10.6)
The last OS update for SL was OS 10.6.8. If that's the case you posted in the wrong forums. You should be posting in the SL forums.
If you are using Mail for your Gmail account, did you check the sound settings in Mail Preferences? Please detail what you have done so far in the way of troubleshooting? Need this info to avoid the "been there done that" scenarios.

UWL CATS time approval error "No data exists that needs to be approved"

Hi all,
We approve CATS working time through SAP portal UWL. The user can see the workitem in her UWL inbox, but got an error u201CNo data exists that needs to be approvedu201D when he tried to execute the workitem. But the user is able to execute the workitem using Business workplace in ECC. We are using the standard UWL application.
This happens only to CATS time entries for certain type of employees (for example, the employees who do not report directly to the approver).
SAP Portal 7.0
SAP MSS 600 SP19
SAP UWLJWF 7.00 sp23
SAP ECC 6.0
Here is what I have found from my trouble-shooting. When I test (preview) the UWL iView, it seems to be working fine. But when I call up the iView from the portal MSS role, I got the error message u201CNo data exists that needs to be approved.u201D
Please let me know if you need more information.
Thank you,
Qi

I have found that the workitem ID is not passed to the CATS approval web dynpro program. Here is what is in the Item Type configuration XML. Is there anything missing?

    <ItemType name="uwl.task.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.OpenTasksTimeApp" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria externalType="TS31000007" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="CatManagerApprove"/>
            <Property name="WebDynproDeployableObject" value="sap.com/msscatapproval"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="true"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
    <ItemType name="uwl.forwardedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.ForwardedTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.futuretask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.FutureTaskTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.completedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.CompletedTimeApp" defaultAction="viewDetail"/>
Thanks,
Qi

Is it only pc's that need to be authorized or does it include itouch,ipads,macbook?

Similar Messages

Maybe you are looking for