Is it or will it ever be possible to hide the notifocation bar when using firefox? Either with an extension or as an included setting?

is there an option i havent found that will allow me to hide the notification bar while using firefox (similar to whats possible with opera mobile) if not is it likely to be added in a future update? as i dont think extensions have enough permissions to hide the notification bar.

hello, there's the fullscreen addon: https://addons.mozilla.org/mobile/addon/full-screen-252573/

Similar Messages

  • Hi, will my downloadable PDF forms look exactly the same as when I upload but with spaces filled in?

    Hi, will my downloadable PDF forms look exactly the same as when I upload but with spaces filled in?

    Not sure I understand the question. Are you talking about the "Download Response as PDF" feature (to see the PDF filled out with the filler's data) or the "Download Submission Enabled PDF" (to sent to people to fill out)?
    If you imported a PDF in FormsCentral, the Submission Enabled PDF will look exactly the same as the imported PDF plus a submit button
    If you designed the form in FormsCentral and save the Submission Enabled PDF it will look very similar to the web form (switch the view in the Design Tab to Page View to see what the PDF will look like)
    The PDF doesn't use skip logic or show/hide logic so this mean that the PDF always shows all the form elements
    I answered a similar question today. See http://forums.adobe.com/thread/1251981
    Gen

  • Will it ever be possible to run the latest versions of firefox on my G4 with OS 10.5.6 or will I always be non compatible

    Every time an update for firefox comes out it comes upnot compatible with your OS

    Hi dumbum,
    You might want to take a look at the [http://www.floodgap.com/software/tenfourfox/ tenfourfox] project. It's a fork of Firefox that supports PPC and older versions of Mac OSX.
    Hopefully this helps!

  • Is it possible to specify the window size when using opendocument?

    Does anyone know how to specify the window size for a child report launched from a hyperlink that uses opendocument? Is it possible?
    I have looked all of the posts I could find and have not found anything that would work, please help.

    So I have come up with the following URL based on the suggestions in this post, but it still isn't doing what I would like it to.
    It does launch a smaller window but posts the child report in the same window.  Is there something else I should do?
    Thanks for your help.

  • Mac's Safari will not hide the top bar when in full screen please help

    So in my Safari when I enter full screen to watch a video the top bar won´t disappear no matter how long I wait and this is one of the little details that just **** me off. Here's a picture of it: http://i.imgur.com/0rGaE.jpg
    Please tell me how to fix it.
    Thanks.

    What version of Safari and what version of iMac are you using? If you can give us you iMac Model Identifier from the About this Mac under the Apple Menu, More Info tab, that would be helpful.
    Good luck.

  • U/tube videos open when using Safari but will not open when using Firefox.

    u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

    Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
    Try the following:
    Repair permissions & restart.
    Make sure you have the latest versions of Adobe Flash Player Software
    QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
    Deactivate the "Flash Media" option.

  • Will it ever be possible to stream music on iOS devices instead of having to download it?

    Will it ever be possible to stream music on iOS devices instead of having to download it?

    We have no idea. We are just users like yourself.
    You could leave feedback about the issue.
    http://www.apple.com/feedback/itunesapp.html

  • TS2755 When will Apple ever make it convenient for the customer, I just bought an iPad Air and I'm very upset that I can only use iMessage, iPads are the biggest mistake to buy. I'll never buy another if I can text using SMS or MMS

    When will Apple ever make it convenient for the customer, I just bought an iPad Air and I'm very upset that I can only use iMessage, iPads are the biggest mistake to buy if you like texting family and friends. I'll never buy another one if I can't text using SMS or MMS.  Is there any hope for a patch or new operating system to fix this issue, or an app to use with iPad Air

    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
     Cheers, Tom

  • HT4972 Will there ever be an update for the 2G models or are they now obselete?

    Will there ever be an update for the 2G models or are they now obselete?

    Pretty sure they're well past their "expiration" date.

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Is it possible to change the owning schema when generating datetime dimensions in the datasource?

    When creating a date time dimension using the dimension wizard and generate schema wizard, i would like to be able to change the owning schema from dbo to something else. The field is greyed out and I am unable to change it.
    Is it possible to change the owning schema when generating datetime dimensions in the datasource?

    Hi rkbjr,
    Thank you for your question.  
    I am currently looking into this issue and will give you an update as soon as possible. 
    Thank you for your understanding and support. 
    Thanks,
    Bin Long
    TechNet Subscriber Support
    If you are TechNet Subscription user and have
    any feedback on our support quality, please send your feedback here.
    Bin Long
    TechNet Community Support

  • When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?

    When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?
    I don't mean the ability to see what tabs are open on another device (I know how to do this). But if I am at work and find something that I want to read at home, it would be helpful to 'send' the tab to my home PC so that when I return home, it will automatically open that tab for me.

    Can anyone help?

  • Is it possible to hide the save function and only use the save as function in teststand

    Hi,
    When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
    Is it somehow possible to "hide" the save button and only use the save as function?
    Or is there another possiblity to solve my problem.
    The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
    What would even be great if there could be a log of what the changes were
    Thx!!! 

    1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
    2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
    Hope this helps,
    -Doug

  • It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3?

    It's possible to integrate the OBI 11.1.1.7.0 with EPM 11.1.2.3? I'm trying to do so but it's not working correctly.

    Not sure this will help you !!!!
    https://blogs.oracle.com/proactivesupportEPM/entry/obiee_11_1_1_7
    Thanks,

  • Is it possible to render the clips individually and relink- such as with Color/fcp?

    I'm fairly new to Ae/ PP, and am trying to figure out a good workflow for grading (using resolve lite) Basically, I need to denoise my footage first (neat video) and then send that footage to Resolve, then back to pp. Now, this works fine with Resolve's scene detector as it can cut up the footage, but if there are any dissolves, etc, then I need to do this via xml instead.
    What I would like to do is: Edit in PP. Send to AE to denoise, render (the denoise need to happen before grading) and replace the original files with the new denoised clips in pp. Then send the xml to Resolve. So far this would work if it wasn't for AE rendering everything into one clip, eliminating the cuts/layers.
    Is it possible to render the clips individually and relink- such as with Color/fcp? If not, any other workflow that could work for me?
    Hope someone can help- dynamic link is driving me up the wall.

    Simply use Dynamic Link to send your whole timeline to AE or use AE's Premiere project import. Then once you have a working AE project, you can use scripts like rdPreCompose to create separate sub-comps for each clip which in turn you then can render separately. Still, the limitation will always be the kind of transitions you use. Essentialyl you should avoid anything that isn't a hard cut or simple cross dissolve 'cos there's no way to recreate it in AE without eating up the handle of your footage. You'd essentialyl be shooting yourself in teh foot if you jump ahead too far in Premiere and already add too much finishing there.
    Mylenium

Maybe you are looking for