Is it posible to customize the"RESOLVER.ADR.RecipLimit; too many recipients " NDR in Exchange Server 2010?
if using recipient limits, is it possible to customize or at least reduce the following NDR. If we have the limit set to say50 and someone tries to send to 100, each individual address will be listed, i.e.:
[email protected]
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
user2#domain.com
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
[email protected]
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
Can this be suppressed or reduced to only say This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients.
Hi,
I have a test in my environment using Exchange 2010. You can use the following cmdlet to change the text to "This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients."
New-SystemMessage -DsnCode 5.5.3 -Language en -Internal $true -Text "This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients."
Here is the result for your reference.
Based on my knowledge, I'm afraid that the following information can't be changed.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support
Similar Messages
-
Customize the Response Message for Resource Scheduling - Sent by Microsoft Exchange Server 2010
We have a room mailbox and when one books it the organzier gets response with the following and the very botoom:
Sent by Microsoft Exchange Server 2010
I want to remove it as I dont want anybody to know what mail server we are running? thankxHi,
As what Andy says, it is by default and there is no method to remove it.
Sorry for any inconvenience.
Regards,
Winnie Liang
TechNet Community Support -
Why the removed flag will be resumed after re-sync with MS Exchange server (2010)
Dear Sir:
I had a big problem using Lion mail application. I like the program since it's quite simple and useful. But this problem makes me not able to work with Lion mail program continaully.
In Lion mail, I import my office mail account which based on MS Exchange server 2010. I just found some mails (sorry I cannot fina any rule) which ever be flagged, when I try to un-flag them. The flag status will come back after re-sync with mail server. But the status doesn't happen with all mails I had. One thing I can confirm is, the "specific" mail doesn't be marked with any status after I checked them using Outlook application (both Mac Office 2011 or Windows Office 2010). Have you ever received similar feedback? Please help me to resolve this issue ASAP. Thank you.
-JosephWhen the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope = "(" env-date SP env-subject SP env-from SP
env-sender SP env-reply-to SP env-to SP env-cc SP
env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing. -
Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.
-
Unable to load the following resource: Error: too many columns- form won't
Hi ..
Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
Unable to load the following resource: Error: too many columns- form won't
Regards,
VasuIt is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to install Exchange Server 2010 with the name of my existing Domain Controller.
I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
The following error occured while searching for on-premises exchange server
I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter RalphsThanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter -
Can any1 please help.
We have Exchange server 2010, we just upgraded it with SP3 and then the issue occers that we were unable to send n receive mail outside of our LAN...i mean from gmail or hotmail..
we have then updated with CU4 which is the latest but still messages will be placed in the poison queue and the transport service will crash.
We have disabled the antivirus also but issue remains same.
We have CAS 1 n 2 as of Clustering environment and we upgraded sp3 for both. but we did CU4 on CAS1 to see the results to resovle this issue but no luckHi,
Did you get any NDR message now when you send a email to outside? And vice versa.
In addtion,I recommend you telnet to port 25 to test SMTP communication.
If any question,please feel free to post here.
Thanks.
Niko Cheng
TechNet Community Support -
Exchange Server 2010 SP3 Databases are not mounting after the recovery process
Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
JayJared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope -
Too many recipients found for message type ORDERS in the ALE model
Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth -
Too many recipients found for message type in the ALE model
Hello Friends,
Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP .
In the distribution model i have defined the sender receiver and message type clearly...
But in va01 after creating sales order extras ->Output->Hearder --->Edit
Output type-- BA00
medium --ALE
Dispatch time : Send Immediately
I am getting a error -
Too many recipients found for message type ORDRSP in the ALE model
Message no. B1130
Diagnosis
In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
Procedure
Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
Please help me in solving this error.
Regards,
jeevanHi Jeevan,
In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
Under the node ORDRSP, add the filter group for Customer.
Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
Hope it solves your Issues.
Regards,
Anbalagan. -
Hi,
When we launch the Exchange powershell via command prompt.. with below command:
PowerShell.exe -PSConsoleFile "D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1"
it throws the following error:-
Following errors occured when loading the console
D:\Program Files\Microsoft\Exchange Server\V14\Bin\ExShell.psc1:
can not load windows powershell snap-in microsoft.exchange.management.powershell.e2010 because of the following error:
no snap-ins have been registered for windows powershell version 2
We are using Exchange server 2010 SP3 rollup 5 and EXCHANGE Server 2010 SP01.We see the issue on both the servers
Can you please provide the steps to reslove the issue.
Thanks & Regards,
Sanjeev GuptaI have got the resolution of the problem. In my environment, the Powershell.exe which was being launched from command prompt, was 32 bit exe, while it was needed 64 bit exe.
It was occuring because in system path there was 32 bit powershell.exe was present. So, after replacing the exe with 64 bit exe, the problem was solved.
Thanks for the help provided above..
Regards,
Sanjeev -
HT4113 how can i unlocked the ipod disabled after too many wrong attempts
how can i unlocked the ipod disabled after too many wrong attempts
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
James5wins, you do not have to restore as new. Restoring from backup does NOT restore the screen-lock passcode. -
HT201263 Ipad mini is locked as someone has put the wrong code in too many times will not restore
Hi
I have a ipad mini (my step daughter does) she was given it by her father, someone has tried to put the wrong code in too many times and now is disabled is there any way I can unlock it or take of to apple?Hey there Bungle,
It sounds like your iPad is disabled due too a forgotten passcode. This article should help you get it back on track:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
The instructions are different depending on whether or not you have synced your iPad to your computer so be sure to follow the applicable instructions.
Thank you for using Apple Support Communities.
All the best,
Sterling -
I have an Ipad 2 Model MC775LL, IOS 6.0.1 (10A523) and I am trying to update to IOS 6.1, but the download is taking too many hours. Is it normal?
You have to connect the iPad to your computer to update.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Maybe you are looking for
-
Can anyone tell me whats going on? Crystal Report Exporting issue
Hi, I am having a issue with the way that CR exports a report. It was working GREAT until we restarted our server. At which point a 2 page CR exported to a PDF began to display enlarged and over 21 pages. The code never changed and if exporting from
-
Using iTunes' "Radio" function, I cannot get the CBC station streams in the Classical category to play. Others seem to work OK.
-
"Mail is already running"?!
I keep getting a repeated error upon trying to start Mac Mail that states that it is "already running". Activity Monitor shows it is not running, CTRL + ALT + delete shows it is not running and there is not spotlight under the dock icon. This happens
-
How to install applet onto the real card?
Hello erperts, I am rather new to java card programming. I have downloaded java card kit and tested sample applications successfully. Now i have OMNIKEY CardMan 5121 card reader with some sample cards(i dont know the type for cards), i just want to i
-
When i open windows,a notification appears saying "installing device drive software" , later "device drive software was not successfully installed".