Is it posible to unlock GTX 545 DDR5 to GTX 550TI DDR5?

Hi everybody! I had bought this card:
So, how you can see, memory bridge is only 128, rops are 16 and shaders are 144, instead 192/24/192.
I have an idea to burn my card with original bios from msi.com/product/vga/N550GTX-Ti-M2D1GD5.html .
I have some questions:
1) Does it have hardware lock? Could i flash another bios?
2) Does anybody did it?
3) Any suggestions?

No, that is impossible. Also as I said in your other thread (https://forum-en.msi.com/index.php?topic=165928) you card is an OEM model that is not covered by support here. This forum is only for retail components.
-- TOPIC LOCKED --

Similar Messages

HT6154 hi i live in venezuela i buy a iphone5s unlocked when i resived the phone its locked by at&t it is posible to unlock it ?

hi i live in venezuela i buy a iphone5s unlocked when i resived the phone its locked by at&t it is posible to unlock it ?

Obviously, you did not purchase an unlocked iPhone. Apple is the only source of unlocked iPhones in the US.
Why did you buy an iPhone from the US if you do not live in the US?

Geforce GTX 550ti 1GB or GTX 460 1GB or other?

I have a 2 year old homebuilt i7 920 with 12GB ram built on an Asus P6T MB with a Seasonic 650W PS. I'd like to upgrade the current Graphics card that was fine for Photoshop but not for Premiere Pro which I'm just experimenting with. I'd like to get a better card for it without going crazy because this will not be my main computer. I never OC'd it either as for Photoshop it seemed fine at the time.
It will be used typically for making under 5 min videos that consist of a around half doz clips each from my Canon 1DM4 in HD 1080. Not too much in the way of effects currently with unsharp mask, color correction and transitions etc.
The ones I've sort of narrowed down to are the GTX 460 1GB or maybe the GTX 550ti 1 GB might do as well for this use? I don't like limiting myself if I'd see much of a difference between them. I'm also totally open to any suggestions for others as well.
As a side note, I'm also in the planning stages for building a new computer from scratch and that will be my main computer that I'll most likely put a better card in during the coming month or two.
While I've built several computers over the years I'm finding this graphics card choice bewildering to say the least! I hope that's enough info to go on and I greatly appreciate any help as most review sites for cards pertain mostly to gaming.
Thanks in advance,
Jim

I don't know the power needs of my GTX 285 (in a file somewhere) but I wasn't worried 'cause I have an 850 power supply
I do know that the card has 2 power connections... I presume one for the GPU and the other for the onboard fan
Before you think your PS will work... check your total requirments
Power supply calculator http://extreme.outervision.com/index.jsp (the PRO version)
Or http://educations.newegg.com/tool/psucalc/index.html?Tpk=power%20supply%20calculator

GTX 285 GB 512 DDR3 vs gtx 550ti

Quick q: Which one will work better in premire pro cs6

Actually, Bill, the OP meant "512-bit DDR3" for the GTX 285. There have never been any GTX 285 cards with only 512MB of RAM. Most GTX 285 cards came with 1GB of RAM, while a few offered 2GB.
In this case, between 1GB versions of those two GPUs, definitely the GTX 285: You did a test with both of those CPUs some time ago with CS5.5 and an i7-2600K overclocked to 4.4GHz with 16GB of RAM. The biggest difference is in the MPEG-2 DVD test of the PPBM5 benchmark: The GTX 285 completed this portion of the test in 117 seconds while the GTX 550 Ti needed all of 146 seconds. This is in large part due to the higher 159 GB/s bandwidth of the GTX 285's 512-bit DDR3 memory compared to only 98.4 GB/s for the 192-bit DDR5 memory on the GTX 550 Ti. However, both of those GPUs have fewer than 384 CUDA cores (240 for the GTX 285, 192 for the GTX 550 Ti), so expect both of those GPUs to be the bottleneck in faster PCs.

Gtx 550ti MSI 1024mb "no video input" issue

Hello,
Since I've got my gtx 550 I am really happy with it, but since a few weeks the video card acts strange. I moved 2 weeks ago to another room in our house, and since then its acting strange. When I start up my pc, my display says: no video input. Then it goes into sleep mode. I was using a VGA cable, tried a different one. It worked!
But not for long, the day after I got the same problem. So I went out and bought and DVI cable. It worked also for 2 days and now I have the same problem. I tried 2 different monitors, both say the same thing, even my TV.
Today I put my old graphics card in my pc and it just worked normally. Im very confused...
Does anyone know a way to fix this?
Sorry for the grammar, I'm typing this on my mobile.
Thanks in advance!

Quote from: flobelix on 01-December-12, 02:18:31
What is that?
Please list your detailed specs. What should the info on the cooler help us to assist you? Better add the cpu used.
That means nothing. What 650w psu is it? Specs? Model?
Im sorry, but I cant boot up my pc normally. I dont know exactly what build, but it worked perfect. 1 year ago I bought the graphics card and built it in. Nothing else changed since then, I think it has something to do with the graphics card. But Ill try to get more information about my pc

My contract with Telcel has expired can I unlock my iphone 3gs to use with other carriers?

I would like to use my old i-phone 3GS while travelling abroad, is it posible to unlock it from the carrier telcel, the 18 month contract is already expired.

Yes, that is the official page on Telcel's website with links to PDFs describing the unlocking procedure, and forms required to complete.
The unlocking procedure includes this reminder: "the 'Official Mexican Standard NOM-184-SCFI-2012' states that cell phones purchased after October 23, 2012—when the rule became effective—must be unlocked for free if you ask." It implies that phones purchased before October 23, 2012 cannot be unlocked.

Question about PNY - geforce GTX 550 ti

I want to put this gpu on my pc:
PNY - GeForce GTX 550Ti 1GB GDDR5 PCI Express Graphics Card
Model: VCGGTX550TXPB | SKU: 2264415
This graphics card features 1GB on-board memory and 192 processors for realistic visuals. NVIDIA CUDA and PhysX technologies provide an enhanced, dynamic gaming experience.
4 Read reviews (12)
Sale: $149.99
I have a PCI express 16x so it should fit. But I have seen this same GPU on amazon and it says its a PCI express 2.0. so my question is. Will this exact gpu fit in my PCI express 1.0 pc? Maybe here hey just forgot to inform that it is 2.0? thanks!

As long as your power supply and case airflow are sufficient, yes. PCI Express 2.0 refers to the revision of the PCI Express technology and it is backwards compatible with PCI Express 1.0. PCI Express slots are either x1 (smallest) or x4 (small) or x8/x16 (regular size), so you should be fine with your x16 slot unless there is a hardware problem. Research your motherboard and power supply before you buy.

Post and boot P67A GD65 B3

I have a new build and when I reboot or cold boot the power phase lights (to phase 5) come on for a brief second,and then it powers off and then it will boot fine. Is this normal? It does this every-time.
MSI P67A-GD65 B3 MOBO
i7 2600K 3.4 GHz,Quad Core Unlocked LGA1155 Sandy Bridge CPU
16GBs 4X4, G.Skill Rip Jaws DDR3 1333 RAM
EVGA GeForce GTX 550ti GPU
Corsair AX 1200 PSU
Coolermaster H70 Hydro cooler
4 WD 1Tb Caviar Black SATA 6 = 3TBs with RAID5
Coolermaster HAF X 922 Chassis

Disable EuP 2013 in BIOS and see if it still does it.

OpenGL problems in photoshop cs5 64bit

I have a nvidia GTX 550Ti graphics card with all available driver updates. Some features of openGL work without problem. The main problem I have is preview of animation with ray trace and export of finished animation. Niether will work. The preview will just hang unless you repeatly click the mouse button, at which point the animation will proceed appx. 1 frame per click. Video export will not complete. Immideatly after clicking export a status bar appears which is already half full. Processor (amd phenom II X6 1055) will run at 80 percent. Graphics card access is at zero. This will run forever unless I stop it, with no results. If I change rendering settings to bounding box or wireframe everything works fine, but I need better output than a wireframe. It seems photoshop recognizes my card just fine as openGL is enabled by default. (tested by erasing user presets on restart) I had the same issue when I was in school and somehow found a workaround for it, but since have reinstalled and lost my settings. Does anyone know how to fix this issue? Any help/advice would be greatly appriected!!
Craig

Well, it opens up fine, and when I click the play button it just plays through. The pin starts backlit, zooms out, then comes in close and the light comes around front.
I started an "Export - Video" and set the ray tracing and other settings as shown here. A progress bar opens and starts at the beginning. It seems to busy my cores very little - on average about 5%, but it DOES make progress, albeit glacially slowly. At this rate I'd predict completion in 20 minutes or so. I see the Time Remaining indicator in the document status area go across again and again, indicating rendering of each frame I think.
This is with Photohsop CS6 13.0.1 on Windows 7 x64 with ATI Radeon HD 7850.
I may have misspoken earlier about Photoshop rendering only in the CPU. That's true for STILL images - I don't know about this video rendering. It's probably true there too, but I have heard that the Adobe video software (Premiere Pro) can use GPU acceleration for video rendering, and I just don't know how much they may have married that into Photoshop.
-Noel

Please Help... Photoshop Misbehaving?

Hi guys, I've been a photoshop user for years and have never encountered anything like this in the past.
I was running PS CS6 with no problems for months. Suddenly without any change to the computer that I am aware of, PS will not Open or Create New files. If I try to open or create a new file, the appropriate dialogue opens, but then nothing happens when I accept. No error, no file.
PS will work normally after a fresh reboot for a short random period of time (30mins?) and then will start acting funny again.
If I boot fresh, open a file, hang out for a while (leaving the file open), and then go back to photoshop to continue working, something else strange happens....
If I start drawing a line, after a few moments of continuous drawing, my line will stop, then as soon as I let go of the mouse button, the entire stroke will dissapear as if someone had hit CTRL+Z. At this time, actually hitting CTRL+Z will not bring back the lost stroke. Also, upon closing the document after attempting to edit it, photoshop will not prompt me to save my changes.
I've deleted my PS prefs on startup and also downgraded to Photoshop CS2.
CS2 seems to open and create files on command, however the same problem with not being able to draw persists.
I've scoured the net for solutions... some suggest a problem with default networked printers. I've removed all printers from my OS and hardware. Please help me...

What information should I provide?
AMD Phenom II X4
GeForce GTX 550ti 1GB GDDR5
8 GB DDR3
Windows 7 Ultimate 64 Bit

Program Monitor is Black, no video playback after installing new graphics card

I bought a PNY Nvidia Quadro 2000 graphics card a few days ago, and since it's been installed, I've been unable to watch video playback in my program, source or even reference monitor.
Similarly, If I designate one of my monitors soley for video playback, the screen is just black, and as the timecode advances on my timeline I only hear sound.
My project is using "Mercury Playback Engine GPU Acceleration" for Premiere Pro CS6.0.1
I went from using one graphics card to using two graphics cards, and installed a third monitor. I've spent the last few days trying everything I could think of, I even uninstalled and re-installed premiere.
Hardware Specs:
Windows 7 Ultimate (64-bit)
HP Pavilion h8-1230z
AMD-FX8150 3.59Ghz 8 core processesor
16GB RAM
600W PS
EVGA Nvidia GeForce GTX 550Ti
PNY Nvidia Quadro 2000
I am using a PCI x16 for the Quadro 2000
I am using a PCI x1 slot w/x1-x16 adapter for the 550Ti
Could this be the problem?
Additional Information
Vectorscope, All scopes, YC Waveform - Display modes all work.
I downloaded the most recent Nvidia drivers for both of my cards.
I haven't received any error messages or had any problems in After Effects CS6, as video playback is working properly in my other adobe applications.

I am still building a new system, so currently I'm still using a 480. You can read all about my choices and progress here: Adobe Forums: Planning / building a new system. Part 1
There are 11 entries in the Benchmark Results that succesfully use the GTX 680, even though it is not 'supported'. They all use the 'hack'. However, the 680 has been added to the list of supported cards for AE, so it is only a matter of time before the 680 will be added to the list of supported cards for PR. Todd had made that clear. Now, when the 680 is added, it makes sense that the 670 will also be added. My guess is that both will be added in a short while.

HPE-510y

I have the HPE-510y, and I have upgraded the GPU (nVidia GeoForce GTX 550ti) and PSU (Dynex 450w), and added a second HD (WD Caviar Black 320GB) shortly after purchase. A little over a year later, I have noticed that the inside of the case seemed quite hot, so I installed two fans that I placed over the holes on the side of the case to help with the cooling.
While my CPU (AMD Phenom II X6 1055t) has a "max" temp rating at around 62c and my GPU at around 70c, I wanted to do TWO things: Replace the case fan... and replace the heatsink on my CPU. Any advice in this matter would be greatly appreciated. :-)

I purchased my HPE 510Y in March. It crashed in July, needing Motherboard, Power Supply, and Harddrive. In the past few days, it shuts down at will. Some days I cannot turn it on, and it stalls at the boot screen with hardware. I have also done bootfix, used repair screen, restores, updated drivers, and anything else that I could find, including every conceivable update or rollback. Did you get yours fixed ??

2012 R2 RemoteFX 3D Video Adapter Greyed Out

I am running a home Server with 2012 R2 with the Hyper-V role installed, with about 5 Windows 8.1 VM's. I'm trying to get RemoteFX working, here's my hardware config:
E5-4610 Processor (Supports Slat)
Nvidia GTX 770 (Driver supports WDDM 1.3 with direct X 11)
Gigabyte GA-X79-UD5 (All bios virtual settings enabled)
When I install the Video card driver (tried different versions using windows 8 and windows 8.1 drivers) initially it shows me the checkbox to "Use this GPU with RemoteFX" However after a reboot it says no supported video cards are available.
Before the reboot after installing the driver when it shows the GPU is capable of remote FX, I am not able to add a RemoteFX 3d adapter to a virtual machine because it is greyed out.
After I reboot, if i uninstall and re-install the driver the GTX 770 is available to use again but I still cannot add the RemoteFX adapter to a virtual machine's hardware.
I have done the following:
Verified in DXdiags that the direct X version is 11
Verified in DXdiags that the driver model is WDDM 1.3
Verified the E5-4610 Proc supports Slat or Extended Page Tables
Enabled all the Virtualiztion VT-x settings in the Bios
Verified the video card is supported and certified in 2012 R2
Verified the Remote Desktop Virtualization Host Agent is started in Services.msc
Tried the newest and oldest video drivers for 8.1, and newest for windows 8
I am using Generation 1 vm's as i heard Generation 2 is having problems with RemoteFX
Tried Generatino 2 VM's, there is no option to add RemoteFX hardware
Tried a different GTX 550Ti video card, same issue
Performed all Windows updates for server 2012 R2
Please advise on the next steps to be taken to get RemoteFX working, or if any of the hardware I mentioned above does not support RemoteFX in 2012 R2.
Thanks.

Hi buzzmuff,
Please check the following entries :
1.ensure if the VM is Win8.1 enterprise
2.Please use RDP 8.0/8.1 to connect the VM then check device manager again
For details please refer to following link:
http://blogs.msdn.com/b/rds/archive/2012/11/26/remotefx-features-for-windows-8-and-windows-server-2012.aspx
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with default printers

Post Author: Nataly
CA Forum: Crystal Reports
I had SQL Server 2000 and Crystal Reports 8.0 installed on Windows 2000. ASP intranet application was working fine and users had their crystal reports on their default printers. After upgrading Windows 2000 to Windows 2003 Crystal doesn't recognize users default printers any more and choose one particular printer on network no matter what users default printer is. They can choose the necessary one still, but it realy bothers them because they get use to have it in a right way.Please, help!

What information should I provide?
AMD Phenom II X4
GeForce GTX 550ti 1GB GDDR5
8 GB DDR3
Windows 7 Ultimate 64 Bit

Connect to dynamic link taking ages

Win 7 64bit GTX 550TI
i have created a new Encore project and gone to File/Dynamic link/import Premiere Pro. In the dialog box, I selected the appropriate PP file and now I'm seeing a "connecting to dynamic link server" with a barbers shop pole graphic as a 'busy' sign. My problem is that it's been running for over 20 minutes now. The PP sequence is 2 hours long but I've done this before and it didn't take this long. Can anyone help ?
Regards,
TL.

I don't think it accesses detail of the sequences before you get the list on the right. So it does seem hung up.
As a test, I would try a different project.
I would try opening the PR project before accessing from Encore.

Is it posible to unlock GTX 545 DDR5 to GTX 550TI DDR5?

Similar Messages

Maybe you are looking for