Is it posible? two ACS 4.2 Appliance with the same remote agent

Hello,
I have a ACS 4.2 Appliance integrate with Active Directory, CA and Remote Agent, i want to agregate another ACS 4.2 Appliance with the same configuration, the same Active Directory, CA. my question is: can i configure the another ACS with the same Remote Agent of the first? in other words ...
i attach the diagram.
Thank you

I have a
ACS 4.2 Appliance integrate with Active Directory, CA and Remote Agent,
i want to agregate another ACS 4.2 Appliance with the same
configuration, the same Active Directory, CA. my question is: can i
configure the another ACS with the same Remote Agent of the first? in
other words ...i attach the diagram.Thank you
Hi,
Maximum number of appliances supported—While a single Cisco Secure ACS Remote Agent can provide services to many Cisco Secure ACS Appliances, support is limited to five concurrent connections by the appliances served. For example, if you have three appliances that are primary Cisco Secure ACSes and three appliances that are secondary Cisco Secure ACSes used for failover purposes only, the remote agent can provide services to all six appliances and stay below the maximum of five concurrent connections.
http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_installation_and_configuration_guide_chapter09186a0080193aa1.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Similar Messages

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

I have two iPods that show up with the same name on my iTunes account. How do I separate them?

I have two iPods that show up with the same name on my iTunes account. How do I correct so that I can put different music on each ipod?

I figured it out. Thanks.

Publish two publications from different customers with the same Adobe DPS ID

Hello:
I have a publication made on InDesign and I have uploaded it to the Adobe Server with my Adobe DPS account. For the first publication, I published the publication with the Folio Producer on the digitalpublishing portal, and then I created the app using the Adobe Viewer Builder. Then, I tried it locally on my iPad. It was working fine and I could see my publication.
Now, I do need to upload a new publication for a different customer with the same Adobe DPS account and I need to create a different app with the new customer look and feel but I don't want to show the first publication in this new app, only the last one.
In a nushell, I need to keep separated two publications (or more) when they are published if I'm using the same DPS Account... Is that possible?
Saludos Cordiales,

Hi Leo,
Every title should have its own publication AdobeID (a title can contain multiple editions / folios).
So you have to request for every title you want to work on a provisioned account with Adobe. Make sure that you have setup the corresponding emailaddress / emailalias. For example [email protected] and [email protected]
After the accounts have been provisioned you can:
* upload and organize multiple folios for that publication in the corresponding Folio Producer
* Create a viewer with your Viewer Builder and on the first page supply the AdobeID for the give publication
You can request new publication accounts any time and these are included with your DPS subscription.
When you first account got provisioned, you should have received an excel document to request provisioning for the various publications. In this document you can list the accounts you want to use for publications, individual users of the system and viewer builder access.
With kind regards,
Klaasjan Tukker
Adobe Systems Benelux

Can two itunes accounts be authorised with the same pc?

I recently was given a ipod touch for christmas while visting my girlfriend, upon this visit while using her laptop i created an itunes account and registered my ipod, when i arrived home i plugged my ipod into my desktop pc and signed into itunes and was told that my pc was not authorised to this itunes account and then was given the option to authorise my pc as im apperently allowed to authorise 5 computers to my account.
The question being is, if my girlfriend was to create an account of her own, as her laptop is already being recognised to my account, would this become a problem and not her allow to use her own account on her laptop, if so is there anyway to remove her laptop from my allowed list ??

Hello, Welcome to discussions. More information about this can be found below.
You can authorize your account on up to a total of 5 computers. So your account can be authorized on 5 machines, and her account can be authorized on 5 machines. So yes a computer is capable of having more then 1 account authorized on it.
About iTunes Store authorization and deauthorization
http://support.apple.com/kb/HT1420
If you share a computer. You will want to ensure you sign out of your iTunes Store account before the next person uses iTunes. This will prevent accidental charges on someone else's Apple ID.
Or you can create a second Windows User account, each have your own user account, own iTunes, and purchases and content will be separate.

Help, my iphone do not charge. my two sons iphone charge perfectly with the same cable..

My iphone do not charge, my sons iphone charge perfectly with the same cable...?? Help Me..
It had about 10% batery left when it suddenly shot itselves off. and now when i try to charge it, it dosent work.... no life???
Help

Plug it in a wait for 15 minutes. If the charge indicator doesn't show, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Problem when importing two photo galleries with the same name. Please Help!

Hi Guys,
I'm not a pro in dreamweaver so I would appreciate if your answer wouldn't be too technical...
Anyway I have experienced a problem. Heres the sotory, I have been making a websie in DW and used Adobe Bridge CS5 to create a photo gallery SWF file that I would use for my website. The problem is that I want to use two different photo galleries on two different pages however when I save my second photo gallery in bridge, it saves every file with the exact name as the first photo gallery I created and is working fine... Thus when I try to import the photo gallery files into my website folder structure, I find that it asks me to rename them because the files from the first photo gallery are called the exact same names.. Now obviously when I try to rename them dreamweaver gets confused and goes to the wrong folder and uses the images from my first photo gallery in the second one.
So I guess my question is how can I organize my folder structure to be able to import multiple galleries without dreamweaver getting confused because bridge names all the files the same. Or how could I save the files through bridge so that they have different names and will work fine when I import into DW...
Thanks and sorry for the essay,
Patrick

#1 You cannot have two files / folders or galleries with the same name. Redo your image Galleries with different names.
#2 SWF (flash) is not visible to iPhone, iPad, iTouch, Android or other web devices that don't support Flash Player. These users will see nothing. You might wish to explore other photo gallery / slideshow options that rely on jQuery instead of Flash technology. Some links below. A Google search will reveal many others.
jQuery WOW Slider
http://wowslider.com/
jQuery Cycle
http://www.malsup.com/jquery/cycle2/
jQuery Nivo Slider
http://dev7studios.com/nivo-slider/
Nancy O.

SCVMM 2012 R2 – two iSCSI network interfaces connected to the same subnet

I would like to configure two networks in SCVMM 2012 R2 which will be used by VMs to connect to iSCSI SAN. Both of these networks should be connected to the same subnet (192.168.100.0/24) because they will connect VMs to Dell EqualLogic using iSCSI MPIO.
Those networks should be available on all Windows Server 2012 R2 Hyper-V cluster nodes.
When I try to create two logical networks in SCVMM with the same subnet, I receive error (Unable to assign the subnet 192.168.100.0/24 because it overlaps with an existing subnet)
How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?

"How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?"
You can achieve this by simply adding multiple vNICs to a VM - connected to the same VM Network.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

Two separate enterprise WiFi networks in the same building

I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wanting to bring in our own Cisco WLC 2504 with 3702 APs. But when we brought this up with the main campus they said we can't have two separate enterprise wireless networks in the same building. That their APs will mark our APs as rogues and try to shut them down. There was also mention that they can't share the same channel and that the radios will negotiate with each other to determine how much power they need for coverage. But from what I've read none of that is true. So maybe I misunderstanding something and hoping someone here with more experience can shed some light on this. The only reason we would want to keep their wireless in the building is so when their staff come to our office they can use it.
So can two separate WLC/AP systems on different subnets and broadcasting different SSIDs exist in the same building with out causing any issues?

By default, the WLC code does not try to contain rogue AP's. Just lots of alarm's and unclassified rogue's.
In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other. Gets fun. Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
Good Luck

I have an IPA2 wifi 3g working fine with wifi up for 3 monthes then from two weeks it get connection but after 1 minutes stop to serf/download with signal and connection always present. With the same router are still connected others 3 pc working!

I all,
the scenario is the following:
WIFI connection with TISCALI operator. Encryption made by WPA2 EAS with router SITECOM or tested also with another router DIGICOM with WPA TPK.
From December up to end of March the IPAD2 working perfectly serfing and downloading.
By two weeks it has a very strange behavour without have changed any configuration on IPAD or network:
with WIFI turned on it discover about 4 different ntw among them the mine, I successfully authenticate with psw the my ntw,
the IPAD2 start to run with Safari without problems, but after about 1 minutes, it stop to serf or download and answer that the Server cannot be reached or the page cannot be open, at the same time the signal is present on the icon of WIFI and it is strong.
This problem is systematic: If I dissasociate the ntw and then authenticate again I start to serf again for 1 minutes (more or less) and then it stops again, this occurs every time I authenticate the ntw after a disassociation.
I made some test changing the encryption from WPA2, WPA and also without encryption but the result was always the same, after about one minute the server seems to be for the IPAD2 no more reachable while the others PC and netbook connected to the same router continue to serf/download without problems!
I also tried to change the router with a DIGCOM that I did not use generally, but the behavour is always the same.
Since the IOS was the 4.3 revisin, I made the upgrade by means Itunes to IOS 5.1 succesfully installed.
But unfortunatelly all test repeted have had the same negative result with the same behavour!
Yesterday I tried to do the complete restore of the System but the tests had the same rsult.
I really don't know how to proceed, the problem started suddenly without any action from my side....is there someone that can help me?
Thanks Massimo

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

Hi, does someone know if I can use two Apple tv's with the same iTunes library? Thanks

Hi, does someone know if I can use two Apple tv's with the same iTunes library?
Thanks

Yes you can use two (or more) AppleTVs with one iTunes library. They can both stream from iTunes (or the internet) at the same time, as long as you have a good working LAN and internet connection.

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync each phone separately

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync contacts separately?

How to rename your device in iTunes

Is it posible? two ACS 4.2 Appliance with the same remote agent

Similar Messages

Maybe you are looking for