Is it possble to attach the same report painter in several groups of report

Hello,
We have about twenty reports in a same library that must pe spread in 5 groups of reports.
Is it possble to attach the same report painter in several groups of report
Thanks
Edited by: Hallouet_H on Jan 31, 2012 1:45 PM
My problem is answered : Technical limitations to group of report (sapnote 387916).
Report Painter Problem
Edited by: Hallouet_H on Jan 31, 2012 3:11 PM

A report could be attached to several reports group.

Similar Messages

Can I use the same trip number for several travelers?

Hi everybody.
This is my question... We need (in travel expenses) to use any field in order to group (add) several trips made for several travelers (in same dates).
Expl: several travelers made the same trip (with different receipts and costs). We need to create a "supra-level" group (which could help our user to summarize, authorize, etc).
I have made some tests changing the trip number assignment (in trip schema) to external one. The system seems not to have any problem if I assign the same trip number to several travelers (please, could you tell me if this is correct?).
I´m not sure this could be the best solution, because I have one question... If I have travel request and travel expenses... can I assign external range numbers to the travel request? (how can I do it?).
Please, could you tell me something about this? (if this is not correct, could you tell me if it´s possible to create a new field to do this?)
Thanks!!!!!!

Hi,
As mentionned in an earlier response, you cannot assign the same trip number to multiple employees.
If you are looking to group together similar claims based on the type of travel which was done, you can always use any of the following fields which can be made 'available' on the entry screen. That is the 'Activity Type' or the 'Trip Type Specific' or the 'Trip Type Enterprise'. By creating categories of types of travel, you can then use these values as selection parameters in your reports to isolate specific costs related to specific activities.
For example, you know that many employees will be traveling for a specific conference and you want to be able to report on the total cost of that conference, you could create an Activity Type and ask employees to complete the field with the appropriate value when completing the claim. Then you could create a report on that Activity Type only.
Another option would be to use Internal Orders. Create an internal order, have the employees assign their costs to the IO and then run a CO - IO report.
Depending on how 'permanent' your employee groupings are, you could also use some fields on Infotype 17 to assign different employees to different employee groupings. These employee grouping values are also available as selection parameters in the reports and can allow you to isolate groupings of individuals.
It all depends where you want to create the grouping....
Hope this helps you somewhat...
Regards,
Roxanne Dore
Travel & FI Consultant

Use the same code module for several steps in the sequence

Hello All,
I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands. I have gotten as far as calling the VI in a new thread so that it can be run asynchronously. I can run the simple sequence and it will indeed open the VI, and move on to the next step. When I close the VI manually from the front panel, the sequence in TestStand completes, as expected. So it appears that I have that much working.
My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters. If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously. My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters. Beyond that, I'm not sure how to proceed. Please advise.
My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results. If I am misunderstanding how TestStand is supposed to work, please let me know.
Thanks,
GSinMN
Solved!
Go to Solution.

What I do is use a Queue to send data to the asynchronous VI. So it can run and do whatever, but also recieve the commands from the queue. I use an Action Engine that holds the queue reference and sends the commands. So you really just have to call the Action Engine from your sequences.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is it possible to have the same Apple ID but several iCloud accounts?

My teenagers use my Apple ID and we like iTunes home sharing, but they want to have their own iCloud account. I don't find the answer anywhere.

mende1 is correct. Each iCloud account is associated with a single Apple ID. It is not possible to have multiple iCloud accounts with the same ID. If you want to create multiple iCloud accounts you have to use a different Apple ID for each one.
Note: you can have different iCloud accounts with different IDs and still share the same ID for iTunes. The ID you use for iTunes does not have to be the same as the ID you use for iCloud.

Episodes from the same TV show are not grouped together

Hello,
I've a cousin from the states staying with me who has no forum membership so this question is from her.
When viewing the iTunes TV Library on her MacBook, episodes from the same TV show [Journeyman] are not grouped together under the same album art even though the info on them is exactly the same except for the episode title.
While I'm here, will the Irish store ever get TV?
Any ideas.
Thanks.

Have they already completed download? If not, let them finish and then see if they are, in fact, the same episode. You may also want to check your purchase history to make sure the episode was not accidentally purchase twice:
Seeing your iTunes Store purchase history and order numbers
http://docs.info.apple.com/article.html?artnum=93010
=) If they are the same episode, and you were not charged twice, you should feel free to delete the item.

When i have 4 or 5 browser windows open at the same time, sometimes they get grouped into one tab and i can not ungroup them. why does this happen?

4 or 5 browser windows open at the same time. Tabs are down in the control bar. every now and then they just combine into one pop up. can't undo and very annoying. Have to close all out and start over.

This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

Mail Group addresses not the same as Address Book contact group addresses.

A group in my Address Book does not show up in my Mail address book the same. The Mail addresses for my group includes ALL my contacts. How do we fix this problem? I am afraid to send a group e-mail in case it goes to everyone else in my address book. We set up the group in the address book via drag and drop.

That's what I thought.... Although when I log on to Mobile Me through the internet the sender's name there appears just like it does in my address book, so I thought there would be a way to set it in mail.

Apply the same motion tween in several layers

My character has many layers such as arm, leg, eye and I applied several tween in each layers of it , now I want to apply the same motion tween in all these layers , Is there a way to do that ?

Download NewerAnimClip from Dave Logan - Flash Extensions and install it.
Select all the layers that contain pieces of your character.
Run the command
Make sure that what it created is set to be a graphic symbol
Under looping, set your symbol to "Play once."
Apply the motion tween to your new graphic symbol.

Report Painter: Cash Flow Actual/Plan Report on Profit Center

I must create a Cash Flow report Actual/Plan/Variance Figures per Profit Center by using a report painter.
It will be created in monthly basis format, and year-to-date format (two different formats).
The format is in GL accounts instead of standard Cash In and Cash Out format.
I need to extract the Plan figures. However, we don't have planning on PCA. We are only doing plan on cost center, either revenue or cost (revenue is created as cost element category costs/reducing tax).
Should I extract it from the Cost Center Plan & add up all plan amounts of the cost centers that attached to the specific profit center? How can I do that?
What do you suggest as the best solution? Please explain briefly and using what t-code, tables and fields to extract from.
Thanks,
-=Meila.S=-

Hi John,
Go to Menu - > Edit -> Variation
You can set the order of the Selection Screen fields there.
Hope this helps you
Regards
Andrew

Report Painter: Error RG102 when executing report

Hi All!
I need help with an error I'm facing with Report Painter...
When executing a report with a large amount of variables and columns I'm receiving the error:
Message no. RG102: Syntax error in GP3NDZHLG3MURI7VJEVF29KI876800, row 0
If in the General Data Selection instead of using a Variable for the Version I use a fix value, it works OK. However, other reports are working properly with the same Gen. Data Selection.
Does anyone has an idea of the cause of this report?
Thanks!

Hi All,
I will try to clarify a little bit on my Issue.
First of all, it's not a BW issue, but a Reporting Problem with the Report Painter for the Consolidation (EC-CS).
The row is configured with a Set of Data regarding a Consolidation Item that includes all the P&L Accounts. It is configured to 'Expand'.
Regarding the columns, I have a large number, between 40 and 50 mixing Ratio with Characteristics and Formulas. Within them, I'm using as well variables for Period, Consolidation Unit and so on.
In the Selection Screen I have configured the following paramters
Version - 100
Dimension - T1
Cons chart/acct - C1
Ledger - US
Cons group (Set and Variable) ZSETUNV
Year for CG breakdwn (Variable) ZEJERAM
Period for CG breajdw (Variable) ZPERAM
With all the above-mentioned configurations the report works great. However, if in the Selecion Parameteres I try to replace the Version (Instead of having fix value 100, to have a variable ZVER) in order to deal with several versions in the same report when I save and execute I receive the posted error:
Message no. RG102: Syntax error in GP3NDZHLG3MURI7VJEVF29KI876800, row 0
Does anyone has an idea if there is a Maxium of Variables for Report Painter or any idea which may be the origin of this error?
Thanks again!

Report painter: Can I do this report?

hi,
I want to make a report for library 8a2. I want to use characteristic "Profit Center" for "General data selection" and I want to use the same "Profit Center" in the rows to distribute by "Profit Center" and "Account number".
Example:
First select by all "Profit Center" of my company (A,B,C...).
In the rows distribute by individuals values of "Profit Center".
first row with A "Profit Center"
second row with B "Profit Center"
How I can do this? Is it possible with report painter?
Thanks in avanced

Hi,
But can this be done once and everytime when the report is run you don't need to give the formula.........?

Report Painter insert blank line after report header

Hi Expert,
I have a problem to insert a blank line (a spacing) after the report header of my customized report painter.
For example, in standard cost center report, S_ALR_87013611, there is a small box listed information like cost center/group ... and reporting period.
Right after reporting period, the report header box ends, and there is a space line between it and the cost element data ...
For my customized report painter, I cannot make this space line.
I tried edit > row > insert blank line ... but not successful ... kindly advise.
Thanks and regards,
-CK

Hi
In KKO2 go to output tab, here under layout, tick header and then press pencil symbol and in the editor you write your header. I think this will give you desired result.
Regards
Rajneesh Saxena

Adding ztotals table in report painter for transaction FGI3 in report type

Hello All,
I have zprograms in report painter for trasaction FGI3. For my reports i have to add Ztables..In the transaction FGI3 there is report type 020. Here they maintain the Zreports.
Can you hellp me out in adding the totals table.
Thanks

Hi,
Transaction FSi2 takes you there.
Alex-

Report Painter: Create variant for specific report created

Hello,
My knowledge in very weak in report painter.
In the initial screen of a report created to analyse the budget by internal order whe have the year and the period of analysis.
By default, for every user the year is 2010 and the period of analysis is from month 1 to month 1.
My question, and I am sorry to ask such a simple question, is how can we change this initial screen?
The aim is to have for every user, when connecting the report, by default the year 2011 and the period of analysis from month 1 to month 16?
Thank you.
Best Regards.
R.

Hi
1. Go to GRR3 and identify the variable used in your report
2. Go to GS12 / GS13 and check the variable definition
May be some default value is specified there / or it is formula variable... Double click on the formula variable and you can check how it is defined...
For the variable related to PERIOD - You need to specify a different variable for the From & To and specify the default value as 1 and 16
Br, Ajay M

Report Painter - Adding Total lines on Report

Hello -
My client wants to add a single line above all of his sub-totals and a double-line above his grand total.
I can't find where to do that.
I think if I were to use report writer and row blocks, I could do it, but not sure about report painter.
Any help would be appreciated.
Regards,
Natalie

Hello - I don't see Insert Diving Line after I click Insert Blank Line.
Where is that?
If I insert a blank line and then double click on the blank line to add a line like the following: "__________" for sub totals, etc, I can't. I can only add another characteristic or formula in the blank line.
Please help and thanks for your help!

Is it possble to attach the same report painter in several groups of report

Similar Messages

Maybe you are looking for