Is it possible 2 arbitrarily move/drag subtitle 2 desired part of screen?

Can't figure this one out.
Perhaps its totally obvious and I'm just missing something.
Thanks.

Hi ankitae - your movie is so big because of the fact the imovie HD uses 'non-destructive' editing. So even if you do 'trash' the parts of clips you do not need, the entire original clips actually remain in the Media folder of the project, and cannot be removed without wrecking the project.
Longer term solution: Buy an external drive perhaps dedicated to your movie projects (before storing stuff on it, ensure that its format is Mac OS Extended rather than a Windows-type format like FAT32). They are quite 'cheap' now
Short-term workaround: you can share the project back to your camera ( mini-DV tape). This is the cheapest storage solution, although there are one or two things to be aware of: if you have used transitions etc already, these will be 'embedded' in the video, so cannot be further modified. This video can be re-imported into a new imovie project, without bringing with it all of the unwanted footage, so you gain in that respect. You could still add titles/subtitles, unless of course you had intended to add labels to each of the very short clips!!
Once you see that the camera has successfully copied your project, you could trash the original imovie project, thus saving the space needed for the re-import.
Make sense?

Similar Messages

Possible to move boot display to different DVI port? (GTX780)

I doubt this is possible, but just in case : is it possible to force boot screens to a different port on the video card?
The MSI GTX780 has two DVI ports - one DVI-I (which includes analog display) and DVI-D (which does not). The DVI-I port displays the boot screen, BIOS, and anything that shows before Windows is fully loaded.
I currently have two monitors. My primary monitor can connect via DVI, and since it is a 120HZ monitor, it currently uses a dual link cable. The secondary monitor is older and cannot connect via DVI, so I use a DVI-I-to-VGA adapter and a standard VGA cable for that display. Unfortunately, this means that the secondary monitor shows boot/BIOS/etc.
Is it possible to move the boot display to the DVI-D port on the card?
Please note that this is not a big issue - having the secondary monitor show boot info is a minor annoyance at worst. The secondary monitor also has HDMI-in, so I can buy a cable and use that, and then move the primary monitor to the DVI-I port. I do want to avoid spending more money, but mostly, I want to see if it is possible to force the boot screens to another port. This seems like it might be a very interesting way to learn about the video card (and VBIOS, if changing that is necessary to do this).
Thank you.

In the "Arrangement" pane of "Displays" System Preference, drag the picture of the menu bar to the picture of the other display.

Is it possible to move app's right to left to another screen?

I accidentally moved an app to another screen; left to right; but when I tried to move it back I couldn't reverse the process. Is it possible to move an app from screen to screen right to left?

Drag the app to the edge of screen 1, hold it there and wait until it switches to screen 2, then move to where you want on screen 2.

HT1751 Question: Is it possible to move just part of my iTunes content (i.e. TV shows) to an external harddrive, keeping the rest of the content in place? Several seasons of TV shows are taking up 102 GB of space, and I'm completely out of space on my HD

Is it possible to move just part of my iTunes content (i.e., only TV shows), keeping the rest of the Library in place? I have purchased several seasons of some TV shows, which take up 102 GB on my harddrive, inside my iTunes Media Folder. I don't want to move my entire Library of music and apps etc to the external harddrive (HD), but I rarely watch the TV shows, so wouldn't mind them being located on an external HD, which I would plug in before trying to watch the shows through iTunes?
Any advice?
Thanks!

I don't think you can simultaneously have two libraries open. But you can have your media spread across multiple disk drives. Just change your iTunes preferences such that the option "Copy files to iTunes Music folder when adding to library" is not selected. That way, new items can remain on your external drive if that's where you add them from.
The only caution is if you ever add items to your library from some "temporary" location, such as a USB drive. With these preference changes, iTunes would keep the native file on the USB drive, which would possibly lead to you deleting the file and losing the link. So, when you have your preferences to allow you to add new items to iTunes without copying them to the iTunes Music folder, you would want to put the native files in the desired location first, then add to iTunes.
To move existing videos and podcasts to the external drive, you can either do that as you have been (moving the native files and correcting the ! warning), or simply delete them from the library (but keep the native files) then re-add them from their new location on the external drive (you'd lose play history and ratings though, but may not be an issue for videos and podcasts).

Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?

Hi
We use Vision Builder for machine vision. There are two interfaces in Vision Builder (Inspection Interface & Configuration interface). It is better machine vision operator would work with Inspection Interface and he should not access to all of setting and tools but he need to redefine some parameter like RIO in some tools like measuring tools for different products.
Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?
Or is it possible to define security like password to some tools and their setting but not all of them?
Thanks
Refa

Vision Builder generally isn't supposed to rely on user input, but there is a step called "User Input" that allows you to get input from the user. ROI would be tricky. I think the slickest way to do that would be to create a VI that displays the image, lets the user drag a rectangle, then pass those coordinates back to Vision Builder to configure the ROI.
Tanner B.
Applications Engineer
National Instruments

How can I find movies with subtitles from iTunes for iPad?

The problems are two:
1) Using an iPad, can I find subtitled only movies? If were possible, how?
2) Ever with an iPad, it's possible setting on/off subtitles in movie? If were possible, how?
Thanks,
Cristiano.

You turn it on by going to settings-video-closed captioning=on.
If a video has captioning, should have the closed captioning symbol on the video description screen in iTunes store.
You can get software to add captions to your own videos.
Handbrake:
HandBrake can now include subtitle tracks that can be turned on and off, instead of rendering them onto the video track permanently (which also reduces video compression). This means you can include Closed Captioning data from DVDs and TV broadcasts, or find SRT text subtitle files on the 'net and include them. When using the Matroska container, you can also store the graphical subtitle images (VobSubs) from a DVD as a separate track. An added benefit is that multiple subtitle tracks can be included in the same output video.
Road movie:
http://www.bitfield.se/roadmovie/about_subtitles.html

How to move multiple subtitle clips?

Hi!
I want to move multiple subtitle clips in the timeline. How can i do that? I want to select multiple subtitles and then drag them to left about 2 minutes. Just click+drag doesn't work. I didn't find help in the manual also...
Waiting for the small tip.
Timo

Hi Timo
As you have discovered you can't drag all the subs in the timeline - you can only drag one at a time... which is why you will find most people recommend creating your subtitles outside of DVD-SP and then importing them. If you have to adjust them you can then go back to this file created outside and adjust the in outs of the timecode.
One way you could save the situation (I''m assuming you made the subs in DVD-SP) is to export an item description of the track then use a little utility called Subtitler
http://www.versiontracker.com/dyn/moreinfo/macosx/26322
This can extract those subtitles back out of the item description and can (I believe) adjust the timings as well and create a DVD-SP friendly STL file which you can re-import into SP... then if any others need tweaking you can go back to that external file adjust, re-import...
I've only ever tested it to see if it coul indeed extract a sub from an item description so can'tr vouch for it's other abilities - we normally use Lemony or Subtitle Workshop on a PC to adjust subs
Hope that's some help
Steve Kirkham
Tree Frog Communication

Is it possible to move Multiple playlists into a Folder at once?

I have hundreds upon hundreds of playlists dating back years. As a non forward thinker I've created most of the in the 'root' of the Music Library.
I'm attempting to organize into Playlist Folders & the one at a time drag n drop is a little tedious. Any way to select/move multiple playlists at once?
Thanks in advance!

You can't select multiple playlists. It should be possible to move them into or between playlist folders by way of a script, but I suspect that is just exchanging one laborious task for another.
tt2

Watching movies with subtitles Apple TV

I've been searching for a post like this for ages so I decided to make one myself to help other users with the same issue I've had:
Watching movies with subtitles in Apple TV WITHOUT the awfull darkening, shadow or whatever blurry effect showed by itunes player when streaming via airplay.
As many apple fanboys, i just cannot get whyy apple has done such a poor job with apple tv regarding to subtitled videos: the darkening of the lower part of the screen where the subtitles are displayed is simply unbereable and, because of it, I've found myself being forced to hardcode (because muxing is not gonna work, you need to hardcode) subtitles into movies with mp4tools or other similar software, which takes AGES of processing. Bt after buying and ipad i've found a brand new -and incredibily efficient- way to do it: VLC STREAMER
With an Ipad and VCL Streamer, you'll be able to airplay any of your video files of any kind (forget about endless hours converting to mp4) and, what is most important about this thread: TO AIRPLAY MOVIES WITH SUBTITLES not the awfull way apple tv does it, but in a clean, beautiful and regular way.
You need to purchase it cause the free version doesn't support airplay streaming. It is under 2$ or so and it's the best 2$ I've spent in the apple store. Ever.
After having purchased it, you only need to run it in your computer, save any subtitle file (usually .srt) in the same folder with the video file it belongs to and (important) with the same name, just with the extension changed. Then you can either stream it via Wi-Fi or load it and save it in your ipad and, anytime you hit "apple tv airplay", you'll watch it on your tv amazingly as it should be, and not with the ******** darkening of the lower part of the screen that apple tv usually displays.
I know it's not an useful solution for everybody cause it needs an ipad to work but, if you are lucky enough to have one, VLC streamer is an app that will allow you to watch your subtitled movies in your tv easy and clear.
PS: Sorry for bad english!

Not always, but generally this is a network issue.
It also depends if you are playing across the LAN from iTunes (Computers icon using Home Sharing of iTunes) or playing purchases from the cloud under the main Movies/TV Shows/Music (iTunes Match) categories.
Audio will require less speed on either the LAN or internet to work well, whereas video, especially HD is more demanding. If it starts up quickly then stops to rebuffer I would consider interference on the LAN if uisng wifi (eg microwaves, neighbouring networks).
Also, to clarify, you are not talking about Airplay from a device to AppleTV (which will be worse with poor connections).
Test your internet speed at speedtest.net if playing from the internet.
SD needs 2.5 Mbps to play quickly, HD 6-8 Mbps for 720 or 1080p.
If playing across the LAN, if feasible (even for testing) connect as many device to the router by ethernet as possible to see if it's the wifi.
Occasionally when AppleTV behaves oddly it can help to unpower it completely and restart - may or may not help but quick and free. Same goes for restarting the router/Itunes when things go bad.
AC

Is it possible to move a freeze-frame from an imovie(9.0.2) clip to iphoto?

Is it possible to move a freeze-frame from an imovie(9.0.2) clip to iphoto?

Yes. You will need to download and install a free app called MPEG Streamclip from Squared 5.
In iMovie, locate the video clip that contains the still you want. Right-click on the video clip and select REVEAL IN FINDER. You should see this clip highlighted in the Finder. Drag this video clip into MPEG Streamclip.
In MPEG Streamclip, move the playhead to the video frame that you want to make a still from. Click FILE/CREATE FRAME...
You can choose JPEG, TIFF, or PNG and give it a name and location.

I got an email with a pdf. Is it possible to move it into Pages and be able to edit it?

I got an email with a pdf. Is it possible to move it into Pages and be able to edit it?

You can import the pdf as an image but it is not editable.
If you are after the text, open it in Preview and copy the text and paste it wherever you want, or open it in Adobe Acrobat Pro and convert it into a Word .doc.
Peter

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

No way to move any buttons in iOS devices.

Is it possible to move files from corrupted sectors hard drive to a replacement one?

My 2011 macbook pro was recently diagnosed with bad sectors. I am looking to get a replacement hard drive, probably a 750 or 1 tb Seagate SATA. Do you think that is sufficient? I do not play games or do anything memory intensive. The most I do is watch a lot of movies.
Also, is it possible to move files from a corrupted sectors hard drive to the replacement? If so, how would I go about doing this?
Also, for the operating system, it is probably wrong, and can't check since my Mac pro won't get past half way on the start up loading screen.

Try a sector copy with CCC and enable using checksum file copy to insure integrity.
Then Data Rescue 4 - try demo before buying
Do a full erase of a drive before reusing.
Invest in SoftRAID.com going forward as it "looks for" weak sectors, alerts.
Also Google around but SMART Utility has been mentioned as an excellent program/utility -
When a drive has used any of its spare blocks from when it ships is #1 indicator of being time to replace.
And of course always have multiple backup sets, methods and know how to use and restore from. Even do a practice set. I would not use just TimeMachine for instance.
And for some, only a mirror array (minimum two but really consider three drive mirror, with stripe reads to improve performance) can allow pulling one, add a new member and still have a two drive mirror.
Cloud storage for backup. With OneDrive and Facebook backing up all the photos on all your devices, Macs and PCs as well as tablets and phones, you can have 100-200GB quite easily. And there is Google Drive and Amazon as well as others.
A new data drive, a drive to do all the recovery of files that were on the failed drive(s), and probably a clean system drive and use that as you recover and build your system back up.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

Is it possible to move the rsw.vba file to a shared directory?

As I create more global functions, contants, variables, subs etc., this file will get very important. So Important that I suspect if it were somehow to become corrupt, deleted or lost most or all of my scripts would be broken. Right now I don't have source control software so I would like to store this file on our fileserver. I have already moved my repositories, scripts and DataBank Files to this location.
Thanks in advance,
hagstal

Hagstal
i don't believe is possible to move the RSW.vba file to a shared directory, however you can just copy the file across different machines.
I would also strongly recommend that, (if this file is gonna become so important) to use a source control system, SVN and tortoise make a very good combination
(http://tortoisesvn.tigris.org/).
Have a look at this thread, it has some other ideas on how to share your RSW.vba file
http://qazone.empirix.com/thread.jspa?threadID=411&tstart=0
Message was edited by: aamat

Is it possible 2 arbitrarily move/drag subtitle 2 desired part of screen?

Similar Messages

Maybe you are looking for