Is it possible access GW archive with say IMAP??

can I copy the archive to a local machine or 2nd GWIA ?

Nope, the archive requires the local client
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/

Similar Messages

Change Color selectlist, is it possible to change it with say CSS?

Hi,
is it possible to change the color of the selectlists/pulldown? So, that it suits the colors of the webtemplate? Can this be done with CSS? If so, where?
Pete
Message was edited by:
Pete

In my example, I am coloring each select option with the color you specify in the tabular form. Add a few more rows to the form and you will see. It is not always red.
Yes, it is hardcoded per option. Did you read that other link in the thread I pointed you to? Seems there are some inherent restrictions on styling select lists so I dont think it is possible to change the color of the "current" option on mouseover (it is hardcoded by the browser to blue)
Thanks

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

I cannot access my words with friends on my ipad. For a brief second it shows a saying "updating this will take a few minutes". It has now been 15 hours. What can I do?

I cannot access my words with friends on my ipad. For a brief second a screen will come saying "updating this will take a few minutes" . It has been 15 hours! What can I do?

That means the person you are playing doesn't have the app on their phone!! And they can only play on the PC?
How about asking the person your playing if they have the app or not.
If you don't want help here, you can more than ask the WWF developer why your having trouble.
You can take your attitude somewhere else!!

Is it possible to read archive files outside of SAP?

Hi Experts,
I would like to read SAP archived data (*.ARCHIVE.ARCHIVING) with non-SAP application. I already know, that data is automatically compressed (and maybe encrypted?).
My question: Is there some possibility to read archive files outside of SAP? I suppose that would be needed to do some decompress first.
Your help is appreciated. Thank you!
Jan

Hi Stefan,
Thanks for your reply. I found some points with your hint. Some summary for others:
460620 - Migrating archive files:
"Archived data may have to be migrated. One solution is to perform an SLO service archive migration. You can also perform an archive migration for archive files using the Archive Development Kit (ADK)."
153433 - Access to archived data from other logical systems
"For data security reasons, the ADK checks whether an archive file was created in the same system and client where it is to be read. If the client, system or file key do no longer correspond to the meta data that were valid at the time of archiving, you can no longer always access the archive file, particularly for reloading. If only the system ID changes when a new installation due to a system copy is carried out, read accesses are still possible. No solution is provided in the standard system. The access to archive files from other logical systems must be taken into account and carried out in a migration project."
Unfortunately, I still do not know if it is possible to read archived data outside of SAP.
Best Regards,
Jan

Tables not archived with CO_ORDER

Hi All,
CO_ORDER is the archiving object for archiving orders in CO
The following tables though they are listed in DB15 transaction are not getting archived with CO_ORDER but the table entries are deleted while running the delete program pertaining to CO_ORDER. These tables however are getting archived and deleted with CO_ITEM archiving object with object type ORD
The list of tables that are getting deleted are COBK,COBK_INDX,COEJ,COEJL,COEJR,COEP,COEPB,COEPL,COEPR.
If CO_ORDER object alone has to be archived, then these tables will not get archived but will be directly deleted.
Is there any sequence in archiving CO_ITEM and CO_ORDER?
Any pointers to the same will be helpful.

Hi,
Refer to the following note and its referenced corresponding notes for further information into this issue.
Note: 110923 Archives cannot be read or accessed
In addition, also refer to the following note that provides further clarity on the use of archiving and analysis (especially the information in relation to Programs RARCCOA1, RARCCOA2)
Note: 138688 Archiving/Controlling: table analysis
If this is an issue that the archive files for CO_ORDER are no longer available (Deleted), then please refer to the following information:
If you run the Analysis Program RKAARCS1 and the selection for the archive files shows a 'lightning bolt' this means the files are not accessible.
You can then check the archive information structures for CO_ORDER and if they are built. If they are not built there will be a 'red light' which indicates to build the structure via transaction SARI and Status. This is not possible if the Archive Files are not available though.
You will either have to restore the Archive files or Create a new Archive file. Care should be taken when you create Archive files that they are stored in a secure location and backed up on a seperate schedule than your normal backup.
I hope this information helps you get the results you are seeking.
Kind Regards,
Brendan
Edited by: Brendan O'Brien on Sep 2, 2008 2:21 PM

Is it possible to print archived Purchase Orders

We are archiving business complete PO's which are beyond 24 months old. However, for Data retention and audit trail purposes, there is a busineess requirement to retreive the print format as needed even after the PO is archived. Transaction SARI does not print an archived PO. Has anyone come across this kind of requirement and how do you address it? Early repsonse is sincerely appreciated.

>
Sanjib Mukherjee wrote:
> Hi Jurgen,
>
> Thanks for your message. Are you saying that once the PO is archived using SARA and it is sent to the file/open text, there is a way to print it? Could you please let me know how to do it.
>
> Thanks,
> Sanjib
No, you misinterpreted what I said.
SAP differentiates 2 types of archiving.
1) Data archiving with SARA
2) message archiving (optical archiving) when printing.
if you archive messages (optical archiving) then the document is usually stored in a repository and can be opened with a viewer.
In you message record detail you have a field storage mode, which is either
1 = print only
or 2 = archive only
or 3 = print and archive
in case of 2 or 3 you store messages. these messages are originals and can be viewed and reprinted at any time.
But if you did not archive messages and archived data with SARA, then it is not possible anymore to print again the document.

Problems accessing Yahoo email with Mail on iMac

Hi, I can happily access my emails from Yahoo using my iPhone and iPad. However, neither my MacBook Pro or my iMac (both running Mavericks) can access my emails using "Mail". I can use Webmail on Safari ok, but whenever I try to access Yahoo mail with "Mail", I get a message saying I should re-enter my password, or that the Server is unavailable. I have 2 stage authorisation activated, and "Keychain", and I had to enter a special 'Yahoo-generated' password to allow my iOS units to work. However, each time I use my OSX units, an email says an unauthorised attempt to access my mails has been made.
I've tried deleting the account and reinstalling and rebooting etc, to no avail. I think that Yahoo needs to authorise the iMac and Macbook, but I can't work out how to do it.

Ive found the solution to this problem. Its the secondary sign in system used at Yahoo for unauthorised sign-ins. While its possible to authorise an iPad or iPhone using a special one off password, this cannot be done on a desk top. The simple solution is to switch off the secondary security sign-in option.

After conecting to SQLexpress 2008r2 using ODBC, access 2003 and 2010 says conection failed.

After conecting to SQLexpress using ODBC MS access 2003 and 2010 says the conection failed with in the app. Not all users are having this issue. Unable to track down the cause. Any help would would be appearated.

With the miniscule of information you have given, it's not really possible to help you. At a very minimum, we need the complete error message you are getting, so that we can tell whether the reach the server and are denied access, or they don't even
come that far.
Erland Sommarskog, SQL Server MVP, [email protected]

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

Very difficult migration from MS Access to Oracle with SQL Developer

Dear Developers
I have tried to used for one Project Oracle Sql Developer Migration from Access to Oracle (Application Express). Was about an evaluation if Oracle Express (with Application Express) or Mysql (with PHP) as target database.
I am working with Oracle for 14 years and i earn my money in projects related with Oracle. Of course i am sentimental and i push every time when an opportunity comes to have as an option Oracle.
This time beside my sentimental approach the decision was different.
I will tell you why and i hope that someone there will listen and make something for a better Product.
I was trying yesterday the whole day to migrate an Microsoft Access database. A nightmare....
1. Microsoft Access Exporter 2000 was too slow. For a 25 MB Access database, running time was 15 Minutes. And 15 minutes to obtain an undocumented error. I followed your instruction and eliminate all references etc... as you described in HELP. a lot of time necessary to read and do..... After that i obtained an Error #..16. Sorry that i don't provide you with an exact number error. i don't have it right know and personally i am not interested anymore. For this error i don't find nothing in forums about it.... Search again and again..... Every time after waiting 15 Minutes in which you don't know exactly what application does or if really does something. I decided to delete sequentially macros, modules, forms, querys from Access database and see where Exporter stops... Time and time lost for trying and searching.... Finally i obtained my XML file only by keeping my Access tables. The file was produced even if i obtained at the end Error #5:..... Because was an error i am not really sure if the file was completly consistent with my database.
2. I followed the next steps and with some errors (enabling, disabling constraints, objects couldn't be created because of different reasons) i had my Model and Oracle Schema. I have tried to export the data from Access and import it in Oracle. data exported was in UTF8 and SQL Loader Control file doesn't have
LOAD DATA
character set utf8
So i tried to add the string "character set utf8" in my dozens of CTL files - with a freeware of course.....
Maybe you can say that if i knew that from the beginning i would have set my character set in SQL Developer. I don't know and i will not ever try with this product!
So finally after hours of working and trying and playing with my nerves, reading a lot of forums and documentation, i had an Oracle schema, maybe incomplete because of different errors at so much migration stages.
And now i have tried for the first time in my life MySQL Migration Toolkit. I read that for migration to MYSQL this tool is what i needed.
I recommend you to try the product and see something about the quality required for a piece of software. Is not enough if your product runs OK with Nortwind DEMO Access database. It should run OK with all ACCESS databases.
With the tool i have done the job in 5 MINUTES. Simple, efficiently and without errors. At the end i had the SQL Scripts and the DATA imported in the database.
Difficult to say something now. I am sentimental but i asked mysef if you can do something to improve the quality of the product.
What arguments can we provide for a client in Migration from Access to Oracle ???? Can you honestly answer at that?
Please try this MYSQL Migration Toolkit.....Maybe this give you some ideas about simple tasks and about what we really need...
Best regards
Adrian

Dear Barry and Kgronau
Thank you very much for your response. My Post was after a long day of trying to import an MDB file.
Maybe you can understand why i was so angry...
Yes i understand that your tool try to do more than other even if actually you don't really convert too much.
From Modules to make some procedures where the whole code is commented! .....
For other MDB which i tried to import in APEX the forms where really not usable. Queries are full of errors requires most of the time manual corrections.
I am sorry that i can not provide you with this MDB which cause these problems.
Data and software doesn't belong to me and the company which own it can not provide to you.
What i hope from your product is, even when errors come, to show a better error explanation. At what object in Access error ocures ? This is very important because i can correct my MDB or just delete the module,form,query in cause if SQL Developer doesn't like it....
Just showing an error Error #.... doesn't help me too much. And if an error occurs i don't know if program continues to work or is dead. No information about this. Maybe you can show that your application is alive and does something (working status etc...) ! Anyway we wait long minutes in front of dead screen....
Again, thank you very much for your attention
Adrian

I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004)

I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004). I have windows xp and it's running on service pack 2. I have downloaded and redownloaded iTunes many times. I'm getting very frustrated! Please help!

I have the same error for Windows Vista. I read all the community posts and followed the suggested fixes including numerous uninstalls and installs, clearing cache, choosing various SSL TL options, turning off all spyware and nothing has worked. My internet works fine for all my other programs so not sure what is going on with Itunes. I will not buy anymore products through
Apple Itunes.

No longer possible to download exe files (say Cancel in the download window

no longer possible to download exe files (say Cancel in the download window
== This happened ==
Every time Firefox opened
== some months

Hello Monin.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Is it possible access GW archive with say IMAP??

Similar Messages

Maybe you are looking for