Is it possible change the vendor old addres while reprinting check in F110
Hi Friends
Is it possible change the vendor old address while reprinting check in F110?
My user first he run the APP and he print the check with wrong address, after that he realized, he had taken print with old address.
Now he want reprint the check after changing the new address in vendor master.
As per my knowledge, once print the check it will store in REGUH table. if we change address at vendor level it will store at LFA1 Table.
So Is it possible change the vendor old address while reprinting check in F110.
Can any body please give me suggestion regarding on the same
Thank You
Regards
vamsi
Hi Vamsi,
you are right, it is not possinble to get new address with reprint check.
Along with clearing document system updates vendor details and line item detais in REGUH / REGUP tables. when user get print, system takes data from REGUH and print details.
In your situation cancel check and reset clear documetn and again execute payment, then system fetch new address.
Regards,
Viswa
Similar Messages
-
Is it possible to change the vendor in a saved Purchase order
Is it possible to change the vendor in a saved Purchase order
Regards
AmitHello, Amit,
no, but you can change the partner functions in the PO, like "Invoicing Party", "Vendor", "Goods Supplier" -- depends on you customizing for partner schemas.
However, this should be used only in case when during the purchase order lifecycle the partner has been changed (as result of merger, bankrupcy, factoring); otherwise, it is much easier to simply delete the PO and create a new one.
Kind Regards
TomT -
How to change the vendor code in intercompany PO
actually PO was created with wrong vendor code. after this MIGO done, all the product sale out MIRO done invoice done. Now at this point *what we 'll have to do to change the vendor code*
HI,
actually PO was created with wrong vendor code. after this MIGO done, all the product sale out MIRO done invoice done. Now at this point **what we 'll have to do to change the vendor code**
it is not possible to change vendor code in PO
you have to do new PO for that
Regards
Kailas Ugale -
Hi to all,
I have question, I just wondering why there is no error in F110 when I change the vendor name.
let say I change the vendor name on 10. 20.2008, then I submitted a proposal on 10.28.2008 the approved on 10.3.2008. then but still the vendor name is old name but no error prompt.
can anyone give a reason why?Hi Deepa,
As you said system will not prompt error because vendor code still the same right?
I would like to know where I can go or which t-code should I use? in In my view when changing any vendor master or any changing vendor name should have control, I mean system should prompt msg or error so that payment won't continue in PF. -
Change the vendor site on a posted ap invoice
Hi all,
in our installation it is not possible to change the vendor site details on ap invoices (AX installed) after a document has been transferred to the General Ledger. On the other hand, we need to pay posted invoices using a different pay site. We need to disable the ax_ap_invoices_aru3(trigger) to allow the change of the vendor site in an ap invoice. How can we do it? Is it safe to disable the ax_ap_invoices_aru3 each time we need to change the site?
Steps to reproduce:
1. insert a new ap invoice (invoice n°3333) using supllier n° 222 end site “legal”;
2. post in GL ap
before pay invoice n°3333 we need to change site from “legal” to “site 2” (it is a secondary pay site of supplier 222 with different address and bank details)
3. query invoice n°3333 from invoices form;
4. change site from “legal” to “site 2”
5. save
message: “APP-AX-56602 You cannot change the supplier site of a posted invoice”
We can not save.
For us it is very important to be able to change the supplier site to handle factoring agreements.
Thank for any idea.Hi,
Pls let us know which version of application ur using. I have tried changing(version 11.5.10.2) the site in voice after posting it to GL it works.
Thanks.
Regards,
Rahmath -
Change the Vendor Reconcillation Account
Hi,
I want to change the reconcillation accounts of few vendors and regroup them. However i have some balances left in the existing reconcillation accounts.
What is the standard prcoess to change the vendor reconcillation accounts.
Please advise.
Thanks in Advance,
SafiHi,
If that is the case,
1. you need to nullify the amt which is exists in the
Old Reconciliation account to the new Rec Account.
2. Once the balance is nill for the old reco account, block the GL for the postings
3. Finally you can assign the New Reco accounts to the
Vendor Master data.
I tnk this is helps you.....
Regards
AA -
I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?
Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred. -
How to reverse from quality and change the vendor account.
I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regardshi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
2. In the field for the movement type, enter
3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
4. Choose Enter to display the selection screen for the purchase order items.
5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
6. Save the goods receipt and exit the Materials Management component.
7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen. -
How to change the vendor code of site in SAP IS retail
Dear All,
In SAP IS Retail, At the time of site creation. we create Site Customer & Site Vendor with site creation. For example If Site code is "1228" then the Customer Code of site will be "C1228" & Vendor Code for site will be "V1228". If by mistake I entered wrong Vendor/customer code then how I can correct it ? "WB02" is not the doing it.
So my questions is How to change the vendor/Customer code of a site in SAP IS retail ? Which T-Code which be required for it ? Please explain me the steps for doing it.
Regards
BirenderHello Rajat,
Please provide us more information about the error you have and it's description so that we can help here arounfd here.
thanks
Willie -
OBIEE 10 - Is Possible change the Presentation Variable without GO BUTTON ?
OBIEE 10:
Is Possible change the Presentation Variable only changing the Value on the prompt ??
Or the presentation variable only change if click on "GO BUTTON" ????
Thanks.You need to click the "Go" button. That is what sets the variable.
-
I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to change the vendor account.
Thanks and RegardsHi,
Please reverse the GR and then delete the line item from PO.
Create New PO with correct vendor code and then make GR.
Once PO is saved you cant change the vendor account no. in PO.
Regards,
Umesh -
Change the vendor payment condition in mass upload
hi
i need to change the vendor payment condition in mass upload
how to change (mass uplaod)
plz give your early reply
K.RaghuramHi,
Ask your abaper to write one BDC program to chnage payment condition.
With Regards,
Jaheer. -
When I try to File > Save As on an .FLV movie, Firefox automatically changes the filetype to .mp4 while Chrome for instance retains the .FLV file type. I wanted to see why this is and how it can be fixed to work similarly to Chrome. Thanks.
If that file is an FLV file then Firefox should save it as such and not change the file extension.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.org/kb/Managing+file+types -
How can I change the date old photos were taken when I only know the year?
I've scanned lots of old photos and I want to change the date to reflect when they were taken. In some cases I only know the year and I don't want inaccurate information to be assigned by the software. How can I do this?
Actually a specific wrong date is no more inaccurate than a year with no more info - neither is correct, just incorrect in different ways
the software de not ever assign a date to a photo - you do o your camera does
iPhoto has no provision for an approximate date do you have to leave them undated in the EXIF fields and use a description field or pick a date to use for unknown - 1/1/xxxx is one suggestion
LN -
Is possible change the title with Acrobat Pro 9?
Hi,
I'm using Acrobat Pro. 9, and i'm programing with C#.
My question is: Is possible change de title in a pdf?
I'm using this two metods and nothing the nothing, the title no change.
---- 1 form ------
PdfStamper pdfStamper = null;
pdfStamper = new PdfStamper(pdfReader, pdfOutputFile);
System.Collections.Hashtable info = new system.Collections.Hashtable();
info["«Title»"] = "";
pdfStamper.MoreInfo = info;
--- 2 form -------
Object ObjTitle = pdDoc.GetInfo("Title");
titulo = Convert.ToString(ObjTitle);
ObjTitle = "";
Regards,
Toni.It is possible with the Acrobat SDK. You seem to be using iTextSharp, which is not an Adobe product, so you would probably get a faster response on forums that deal with iTextSharp.
Maybe you are looking for
-
How do I transfer my bought itunes songs to my MAC from my Windows PC?
Is it also possible to transfer my songs from my IPOD shuffle to my MAC?
-
Hi All I have my newly Lenovo x240 installed with Windows 7. Sometime, it can boot up, but sometimes it keep rebooting during the windows logo appear. When it goes wrong, it will have the following screen. But, if I am lucky, after several "auto-reb
-
Possible Display problem on MacBook Pro 15''
There is one pixel that shows up as red in the bottom left corner of my display. Screenshots do not capture it. It is present in every program and rebooting the laptop does not get rid of it. Does anyone know what it is or how I can get rid of it? Sh
-
Looking for opinions: AppleCare worth to pay for it ?
Within the next three weeks we have to decide whether or not investing around 1.000 Euro ($1.200 USD) into three year AppleCare support for our company's XServe. At this time I had made only (more or less) bad experiences with the 90-days-support App
-
In 1.0.2 and earlier versions, I was able to configure my wifi connections by entering the SSID of my hidden office network and when I was in range it would automatically connect. Starting in 1.1.1 whenever the phone sleeps or when I go out of range,