Is it possible edit user prefs in CS6 to make 'snap' to text that is lime green easier to see

Hi there, sorry to repost but I was not sure if my first post went through.  When an object aligns or snaps in place you get a helpful message in lime green telling you the position of the alignment , centered, etc.  Well, my eyes have started to change and I have a lot of trouble reading the tiny green text on a white background.  Is there any way to alter this 'under the hood' in a preference file for example?  And if this question is too technical for this forum, can someone point me in the right direction?
Kind Regards
-Mark

Use Cmd(Ctrl)-K to access the AI Preference file and go to the Smart Guides tab. change the color there to something like the Medium Blue.

Similar Messages

  • Is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.

    hello everybody
    is it possible to tell me how i can make program in labview that take pixels of black and withe image and give coordinate of black or white pixels back to me.
    Solved!
    Go to Solution.

    Here's a slightly simpler version.
    (Depending how you want to process the output, you might not need to traspose and/or reverse. Boolean to 0,1 works directly on the 2D array if needed )
    amkamyab wrote:
    it is good. i could enter 1bit image in and show it in array. now i want to take pixels coordinates. i meen i want to have (x,y) of each pixel to send it pixel coordinate to another program i wrote for steppers motor.
    Can you be a bit more specific on how the output is supposed to look like? Initially you wrote "black or white", and since all pixels are either black or white, do you want to send all pixels? In what format? In what order? Please clarify?
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    BW-Pix.png ‏8 KB

  • Hello and HELP! Over the years I have saved Invoices in my Documents. I have just tried to open them and all I am getting is " cannot be opened, Invoice**** is used by another user, do you want to make a copy?" That's on all my invoices.

    Can someone help please.
    I have just "lost" ( cannot open) all my saved Invoices in the Document folder.  All I am getting is " cannot open, Invoice ** is used bey another user, do you want to make copy? " That doesn't work either. I can't get anything on the time capsule either. How can I reset to an earlier time? Or what can I do?
    Thank you

    Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

  • Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

    I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb.  Ideally, I would like to show both images and text. I am actually using iWeb '09.  I am not opposed to writing html code if necessary.
    Thank you for your help!

    Probleme solved without having to change anything in the flash.
    The solution was to add a small part in the CSS in HTML
    html {
    overflow-x: hidden;
    overflow-y: auto;
    Solve probleme. All browser. VERY usefull to know !

  • Is it possible (for a novice to do) to make a Adobe macro that automatically.....

    So I want to develop a macro, or something similar, that I can click on or hit a key sequesnce that will automatically add a certain cover page to a PDF.   I have a coverpage that I MUST add to each document before I send back to a requestor so rather than have to navigate to that folder and import that page as the new page 1 I'm hoping a macro can be developed.   yes?
    TIA,
    Chip

    You can use an Action (if you have Acrobat Pro), or even a script (more complicated to develop) that can be launched via a toolbar button or a menu item.

  • Is it possible to save a non-editable PDF from InDesign CS6?

    Wehave an issue with our printer and would like to start giving them files that are non editable. In Illustrator it's as simple as checking and unchecking a box in the PDF settings dialogue. I've tried multiple ways that I have across the net but they all are editable once opened in Illustrator for example. We would like to give them flattend/non-editable PDF. We would prefer not to use any passwords or security features.
    Is there a way? Thanks for the help.

    Are you worried that they are opening the PDF in Illustrator and might accidently edit or move/delete something?
    All printers would have either Acrobat or Adobe Reader which is free, so there is no reason for them to open your PDFs in Illustrator.
    Perhaps they are opening them in AI to correct problems in your PDFs. Ask them if there are any issues, it's possible your InDesign or PDF creation process is wrong for digital printing, (for example, Rich Black text that needs to be converted to 100 Black only, etc.)
    Or maybe they are doing imposition.
    However, opening PDFs in Illustrator is still not a good idea. Illustrator is NOT a general purpose PDF editor.
    In Acrobat Pro there are Preflight Profiles and Fixups that may correct some issues.
    PitStop Pro is a better choice for correcting issues in PDFs. And there are also third party Acrobat plug-ins for impostion purposes.
    A RIP with software specifically designed for it will also help fix PDFs without resorting to Illustrator.
    Since your printer is in-house, I suggest you have a meeting to ask if they are opening your PDFs in Illustrator and why they are doing so.
    Perhaps some guidelines should be agreed upon by both sides and enforced by some rules.
    I have a feeling that some additional training (possibly on both sides) is needed to straighten out this situation.

  • Edit User Profile How do I enalble user lo loggin to their own profile page and edit it?

    Hi
    I am having some problems....... any help would be nice
    I am using DWCS3 and ADDT toolbox extension wamp and phpmyadmin
    I am trying to create a site for people to be able to post a profile with a picture and info and display it in a dynamic table.
    I can create the form, a database and display the data on another page in a dynamic table all ok..... kind of.
    I can create a user registration system with ADDT.
    I can redirect them after registration to a post profile page, which has a form to upload details. I can then display those details on a user info page.
    I would like to allow logged in users to be able to click on a link to their own profile page , which would show the same form that was filled out in the post profile page, but would be already populated with their previously entered information. I would like users to be able to edit the content of the form and update the information in the database and automatically delete delete any previously entered information ( only in the fields that have been edited)
    How do I go about doing this?.... step by step?
    I want to allow logged in user to view their own profile not every bodies.... how do I do that?
    I have read on another post that to do something similar to this I should filter my database information using a session varialble MM_username that I think is created automatically after user logs in .... but I don;t know how to do this.... I really don;t understand is this the way I link my user to a page that only displays their info ? or is there another way?
    I would also like to allow only people who have posted a profile to be able to edit profile ...... do I do that by
    1. new user registers and is redirected to login page
    2. user logs in and is redirected to an index page that has a post profile button and a edit profile button but only the POST button is active ( and links to a form to post info ) and the edit profile button is linked to a " You must post a profile first" page ( with a link back)
    3 so user posts profile and is directed to an index page which has an edit profile button which is now linked to an edit profile page
    Does that sound correct?
    Any suggestions in getting all this to work would be much appreciated

    Hi Yomi,
    I have created the users page which submits to a members page and tell the user to edit biodata, profession, and hobbies. but on clicking I am really confused on how the id will be transfered from the members page to update biodata and the user updates the form which will show past records. this should also apply to the profession and hobbies
    If I understand this right, you might want to consider providing a complete "userdata" section which comes with a Dynamic List and a Dynamic Form to have users add & update their data plus (via the Dynamic List) track all past records
    Lastly is it possible I create recordset at will and the id will be passed thru since kt-login-id behaves sololy
    I really can´t recommend this "pass user_id as URL variable" approach in this case, as URL variables are displayed in the browser´s address bar -- and this is absolutely insecure, because anyone could simply change the displayed "user_id" value, reload the form and hence edit data which belongs to a different user.
    The only secure method is indeed to use ADDT´s session variable kt_login_id
    Fatal error: Call to undefined function: var_export()
    Not sure, but maybe some "includes" files haven´t been generated
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • Video editing/exporting in Photoshop CS6 - original quality gone in YouTube. Idea?

    Hello, i've searched this forum and other sources already, but couldn't find a solution. Unfortunately, i am not a video pro.
    I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture  and save in WMV.
    I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
    My original records  (according to MediaInfo):
    Software: FastStone Capture
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 113 Kbps
    Maximum Overall bit rate                 : 124 Kbps
    Format                                   : WMV1
    Codec ID                                 : WMV1
    Codec ID/Info                            : Windows Media Video 7
    Description of the codec                 : Windows Media Video V7
    Bit rate mode                            : Variable
    Bit rate                                 : 56.8 Kbps
    Width                                    : 852 pixels
    Height                                   : 480 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 15.000 fps
    Bit depth                                : 8 bits
    Bits/(Pixel*Frame)                       : 0.009
    Stream size                              : 212 KiB (50%)
    Audio
    Format                                   : WMA
    Format version                           : Version 2
    Codec ID                                 : 161
    Codec ID/Info                            : Windows Media Audio
    Description of the codec                 : Windows Media Audio 9.2 -  48 kbps, 44 kHz, mono 1-pass CBR
    Bit rate mode                            : Constant
    Bit rate                                 : 48.0 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 44.1 KHz
    Bit depth                                : 16 bits
    Stream size                              : 179 KiB (43%)
    If i upload this *original* WMV clip *without any editing* to YouTube, it looks very nice on YouTube (if you manually set the YouTube player quality to 480p). YouTube upscales the low-res clip nicely even on big screens. (I use the low screen resolution of 852x480 so that tool icons and letters in menus don't appear to small. I would love to stay with that resolution.)
    But i want to combine several screen capture takes in Photoshop CS6. Inside Photoshop CS6 Extended, i get the Adobe Media Encoder (AME) and have only two format options: H.264 (MP4) and DPX (DPX only offerening resolutions between 1080 and 2048 px wide). There is no AVI or WMV or anything else offered.
    So from Photoshop CS6 i export to MP4 with these specs:
    MP4
    Preset: High Quality (nothing "better" is offered)
    Size: as original (852x480)
    Framerate: as original (15 fps)
    Interlacing: progressive (recommended by YouTube)
    The result looks very nice when i play it locally in VLC. It looks like the original WMV.
    But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original.
    If you like, you can compare the two videos from the same source online:
    Uploaded WMV clip, looking good (set player to 480 p):
    http://www.youtube.com/watch?v=vjmKohV_jmU
    Rendered in Photoshop CS6, looking bad (set player to 480 p):
    http://www.youtube.com/watch?v=aA0Veq9IZac
    I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
    I searched my folder C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
    My questions:
    - When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
    - Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.) Would it help?
    - Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
    - Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
    - What to do?
    Thanks for all suggestions!

    My Canon EOS Camera can also capture 1080p Video it writes it to the memory Card as Name.MOV.  I don't do video the file are huge. But you 
    made me want to see what CS6 video support could do to reduce the file size.
    So I took one of my captured .mov files and droped it onto Photoshop the .mov file was 264,678,777 byte in size.  I saw the Photoshop could render H264 .mp4 video anf that there were some presets for YouTube at 29.97 the rate my camera does for 1080p, 720p and SD 360p I also tried createin a 854x480 16:9 video 480P
    These are the size file produced 480 make no sence it so close to 720 file size.
    Canon EOS.MOV  264,678,777
    CS6 H264 mp4
    YouTube1080p   45,651,351 http://www.mouseprints.net/old/dpr/YouTube1080p.mp4
    YouTube720p    29,193,697 http://www.mouseprints.net/old/dpr/YouTube720p.mp4
    YouTubeSD360p  6,172,199 http://www.mouseprints.net/old/dpr/YoutubeSD360p.mp4
    YouTube480p    29,190,029 http://www.mouseprints.net/old/dpr/YouTube480p.mp4

  • Login items - not in user prefs

    My wonderful imac os x - tiger 10.4.7 opens 3 items (safari, mail and ichat) that are not in the startup items list.
    As the initial login takes ages I want to remove them, but as they don't appear in the list under accounts/login items I can't.
    I have tried adding them so they do appear and then deleting them, but that doesn't fix it, they still open on login.
    Any ideas how I can fix this.

    "Login Items" can be specified in at least three different places. The usual one (written to by the "Accounts" pref pane) is the "~/Library/Preferences/loginwindow.plist" file in each user's "home" folder, but if the items aren't appearing in the pref pane, they are probably listed in one of the other locations.
    The other user-specific file is in the "~/Library/Preferences/ByHost" folder, and is called the "loginwindow.xxx.plist" file, where the "xxx" usually represents the MAC address of the built-in ethernet card, so will vary from computer to computer. If present, try moving or deleting that file to see if that prevents the unwanted items from opening.
    The computer's main "/Library/Preferences" folder can also contain a "loginwindow.plist" file, but any items listed in that file will open at login for all users. "Admin" privileges will usually be required to remove or make changes to this file.
    Also, note that a computer's administrator can set up "login items" for "managed" users, through 'mcx_settings'. Again, this isn't something that an individual user can override themselves.
    This probably isn't what you are after, but unless explicitly prohibited in 'mcx_settings', it also is possible during any given log in to prevent login items from opening by holding down the "Shift" key while logging in, but it would be necessary to do this every time.

  • App Builder doesn't advance - single edition user

    I have followed directions identified in the following chain with Neil Enns - Adobe but have not be able to be successful in advancing in DPS app builder.
    Re: Can't advance in DPS App Builder
    I've completed building my folio and have chosen 'Create App' from the Folio Builder. When DPS App Builder opens, there's nothing listed under app type/name, despite being signed into DPS app builder with the appropriate Adobe ID. When I select 'New', then 'iPad,' it brings me to a form which I then complete, but DPS App Builder won't go any further when I choose 'next'. I'm a single edition user anxiously trying to submit the app before the may 1st expiration deadline.
    I've been chatting with Adobe support, Case # 0186577346, but have not yet had any luck in determining how to fix.
    As referenced in Re: Can't advance in DPS App Builder, I launched App Builder from the Folio Builder Panel. I've also closed the Folio Builder panel once DPS app Builder is open, I've restarted my machine, and uninstalled/reinstall DPS app builder.
    Stuck screen:

    PROBLEM RRESOLVED
    I uninstalled, restarted, and installed as forums indicated. What I found is that DPS App Builder had a default startup window that was showing, so when Adobe InDesign CS6 and told to 'create app,' it was sending data to DPS App Builder, but its default window was negating the data sharing. DPS App Builder didn't have any folio to work from. When I opened DPS App Builder and selected the check box 'do not show at startup,' closed the app, and then told InDesign to 'create app,' again, it was successful. I was able to create icons and splash screens and connect the certificates and move forward from there.
    Neil Enns - Adobe - this may be an important bug to note in DPS app builder.

  • How to edit a time machine backup to make it bootable in single user mode

    I am away from home and do not have snow leopard install disk. My MacBook just keeps loading. I have my time machine backup and I was wondering if I could make my time machine backup bootable by deleting and editing files in single user mode and then booting from the external hard drive. I have already tried a lot of things like fsck and haven't gotten it to work so I thought all you command lovers could help me edit my time machine backup to make it bootable. Maybe I could somehow install applejack from the command line too?
    P.S. Right before it broke I restarted my computer and when it was turning off, There was a blue screen with a loading symbol and when it started to turn on it just kept loading with the apple symbol, if that helps you fix the problem.

    To begin with, there is no way to make a Time Machine backup bootable.
    You say you've tried a lot of things; does that include a safe mode boot? (hold down 'shift' during startup)
    I'm not myself familiar with Applejack, so you'll need someone else to confirm this, but I believe that it should be possible to install from the command line.

  • BP: can't edit "user name" field in section "employee data"

    Transaction -  BP, tab - identification, Change in BP role - employee.
    why i can't edit "user name" field in section "employee data"?
    Field is unchangeable only for one in a  ~800 BPs.

    Earlier it is possible to change the User ID field.
    Guess that this might be ur prb
    If this BP is used somewhere else I mean in some transaction/CRMD_ORDER/Support message,so it might be not possible to change this now....becuase the log will become incosistent.
    for e.g. if in ticket XXXX i have been assigned as reporter as...BP no 10
    Later you are assigning this to no 10 to some other person or ID ....
    Then the log of CRMD_ORDER or ticket will become inconsistent because the BP is now assigned to a different person who never worked on the same.
    Actualy i have faced this query during one implementation that why we are able to change the UserID of existing BP even if it is used in some transaction/message.
    Might be this is a new correction in the recent release.
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Jan 16, 2009 10:10 AM

  • Deleting User Prefs

    I work in a computer lab whose main function is to provide computers for University students to edit videos on. We have a lovely fleet of G5s and use FCP 4.5 (and DVD Studio Pro, Photoshop etc) on all the computers. To prevent problems for the students, my boss recently told us to, every morning, delete the FCP User Prefs. For whatever reason, this doesn't seem like a good idea to me- I realize this procedure can be useful sometimes, but everyday as prevention??? Can someone explain why this is a good idea (or why its a bad one)?
    Thanks

    I can understand why they'd want to do this, because students can make some unwanted changes to the settings and prefs on a daily (hourly, really) basis.
    To make your assigned job easier, use FCP Rescue. Download it here:
    http://pistolerapost2.com/fcprescue/
    You'll want the FCP Rescue 4 version for FCP 4.5. Install it, then have your boss set the settings and preferences s/he wants to be the default. Close all projects. Then Quit FCP.
    Now open FCP Rescue and click the Backup button. That saves those settings in a separate folder for later reteival.
    Once that's done, each morning open FCP Resuce and click the Restore button, That will load the settiings that FCP Rescue saved.
    Done.
    Oh, and you might change the Ownership/Permissions for FCP Rescue, so the students can't easily mess with it.

  • Restrict group to edit users in people picke in infopath

    hi
    I have a document with people picker I want to restrict group A to pick or edit the users in existing document and groupB able to edit the users in people picker how is it possible to make it in InfoPath.

    Hello,
    This would be easy to do with groups that can access specific sections of the form and then use SharePoint or AD groups to govern access, but unfortunately it does not work in InfoPath. 
    One alternative possibility is to set up a list in SharePoint and enter the names of the smaller group of people into that list (Person field).
    The InfoPath form has a data connection to that list. The form has one section with a people picker and another section with a calculated field that shows the value of the people picker. 
    When opening the InfoPath form, check if the current user exists in the list and hide the section they should not see.
    cheers, teylyn

  • LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

    Is there a fix for this?  When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image.  In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched."  When I click OK, the image promptly opens in Photoshop CS6 like normal.  This wan an itermittent issue for me after the LR4.1 release.  I was hoping that LR4.2 would help, but now I get the error every time.
    System
    Lightroom 4.2 x64
    Photoshop CS6 v13.0.1 x64
    Bridge 5.0.1.23 x64
    Windows 7 Pro x64
    AMD Six Core / 3.9 Ghz
    16 GB Memory
    NVidia Quadro 1 Gb Video
    Scratch space on three drives

    This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files.  LR4 released at the same time as the D800.  LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool.  Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
    Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop.  LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
    My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems.  As it stands, LR4 is not usable for me.

Maybe you are looking for