Is it possible for a guest system to spy host system when using virtual maschine?

Hi all,
I want to prepare virtual maschine which will be used to connect through vpn with one of my clients. There are some other programs and devices that I have to install in order all of this to work. However there is a security concern. On host system I've mailbox and other stuff from my corporation. Is there any way
that guest system will successfully try in any way to monitor what is happening on host system (for example by reading emails, checking network trafic, doing screenshots and so on)?
any help appreciated

Welcome to the Community - No - The VM runs isolated form the host machine

Similar Messages

Best practices for ZFS file systems when using live upgrade?

I would like feedback on how to layout the ZFS file system to deal with files that are constantly changing during the Live Upgrade process. For the rest of this post, lets assume I am building a very active FreeRadius server with log files that are constantly updating and must be preserved in any boot environment during the LU process.
Here is the ZFS layout I have come up with (swap, home, etc omitted):
NAME                                USED AVAIL REFER MOUNTPOINT
rpool                              11.0G 52.0G    94K /rpool
rpool/ROOT                         4.80G 52.0G    18K legacy
rpool/ROOT/boot1                   4.80G 52.0G 4.28G /
rpool/ROOT/boot1/zones-root         534M 52.0G    20K /zones-root
rpool/ROOT/boot1/zones-root/zone1   534M 52.0G   534M /zones-root/zone1
rpool/zone-data                      37K 52.0G    19K /zones-data
rpool/zone-data/zone1-runtime        18K 52.0G    18K /zones-data/zone1-runtimeThere are 2 key components here:
1) The ROOT file system - This stores the / file systems of the local and global zones.
2) The zone-data file system - This stores the data that will be changing within the local zones.
Here is the configuration for the zone itself:
<zone name="zone1" zonepath="/zones-root/zone1" autoboot="true" bootargs="-m verbose">
<inherited-pkg-dir directory="/lib"/>
<inherited-pkg-dir directory="/platform"/>
<inherited-pkg-dir directory="/sbin"/>
<inherited-pkg-dir directory="/usr"/>
<filesystem special="/zones-data/zone1-runtime" directory="/runtime" type="lofs"/>
<network address="192.168.0.1" physical="e1000g0"/>
</zone>The key components here are:
1) The local zone / is shared in the same file system as global zone /
2) The /runtime file system in the local zone is stored outside of the global rpool/ROOT file system in order to maintain data that changes across the live upgrade boot environments.
The system (local and global zone) will operate like this:
The global zone is used to manage zones only.
Application software that has constantly changing data will be installed in the /runtime directory within the local zone. For example, FreeRadius will be installed in: /runtime/freeradius
During a live upgrade the / file system in both the local and global zones will get updated, while /runtime is mounted untouched in whatever boot environment that is loaded.
Does this make sense? Is there a better way to accomplish what I am looking for? This this setup going to cause any problems?
What I would really like is to not have to worry about any of this and just install the application software where ever the software supplier sets it defaults to. It would be great if this system somehow magically knows to leave my changing data alone across boot environments.
Thanks in advance for your feedback!
--Jason

Hello "jemurray".
Have you read this document? (page 198)
http://docs.sun.com/app/docs/doc/820-7013?l=en
Then the solution is:
01.- Create an alternate boot enviroment
a.- In a new rpool
b.- In the same rpool
02.- Upgrade this new enviroment
03.- Then I've seen that you have the "radious-zone" in a sparse zone (it's that right??) so, when you update the alternate boot enviroment you will (at the same time) upgrading the "radious-zone".
This maybe sound easy but you should be carefull, please try this in a development enviroment
Good luck

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

Is it possible for a iPod touch to get a virus when downloading free games off the internet? If yes, is there an antivirus program to protect the ipod. and can some of the current apps be saved from the virus damage?

Is it possible for a iPod touch to get a virus when downloading free games off the internet? If yes, is there an antivirus program to protect the ipod. and can some of the current apps be saved from the virus damage?

I had one game permanently just stop working, it usually does crash, but that last time it just went bad, I don't know the reason, I tried powering off iPod, relaunching game, but the game never worked again. I think it corrupted its own save file or some of its own data.
Have you tried another game or app, do those work? If they do, then I guess you know where the problem lies, but if they all stop working, then what about apps, can apps launch?
Lastly, apps from the app store are checked by Apple, so they are clean.

Is it possible for me to purchase UK Itunes store items when in the USA with a USA itunes account?

i'm trying to purchase an item from the iTunes store that is only in the UK iTunes store. Is there anyway possible for me to purchase something from the UK iTunes store while my account is attached to the USA store?

No.
You can purchase ONLY from the itunes store of your country of residence AND ONLY while inside the borders of that country.
Sorry.

Time machine on Lion crashes the whole system when used with external HD

Hi all,
Anybody got the same problem? I did a Time Machine backup just before I did the upgrade to Lion (using an external USB HDD) after the upgrade (that went well in my opinion) when I ask TM to do another backup it stays on "Preparing" indefenately and ultimately crashes the whole system ( reset with ctrl+cmd+power button) is required otherwhise the system stays non reactive.
Regards,
Iwan

Start by verifying your internal HD, and repair your backups, per #6 in Using Disk Utility.
If that doesn't help, see #D6 in Time Machine - Troubleshooting for a possible way to cancel the backup. If that works, use the widget in #A1 there to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

I have a mac 10.6 system when using firefox, I can no longer open attachments or downloads. I deleted firefox and reinstalled and it still doesn't work.

When using firefox, I can no longer open attachments, pdf or downloads. A new window will open and it is blank. The only way to open an attachment or pdf is to shut down firefox and use safari. Everything works with safari so I can't understand what went wrong with firefox. I even download adobe reader thinking that would help. I then deleted my original firefox and re downloaded firefox again. It still doesn't work.
I am using a 10.6 operating system on my Mac.

Try to disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

Default Privilege Level for ASA users authenticated by Radius or TACACS when using ASDM

Hello,
I'm trying to figure out what the default privilege level is for users that are authenticated to the ASA via a remote authentication server when using the ASDM.
the command "aaa authentication http console TACACS+ LOCAL" is used in the ASA config.
The remote server is NOT setting any privilege levels for users. There are also no aaa authorization commands present in the config.
So what privilege level do the users receive when they login with the ASDM? I'm being told that the users receive admin access which includes config write, reboot, and debug. But I cannot find any documentation stating hte default level.
Please advise. And providing links to cisco documentation would be great too.
Thanks,
Brendan

Hi Berendan,
Hope the below exerpt from document clarifies your query. also i have provided the link to refer.
About Authorization
Authorization controls access per user after users authenticate. You can configure the security appliance to authorize the following items:
•Management commands
•Network access
•VPN access
Authorization controls the services and commands available to each authenticated user. Were you not to enable authorization, authentication alone would provide the same access to services for all authenticated users.
If you need the control that authorization provides, you can configure a broad authentication rule, and then have a detailed authorization configuration. For example, you authenticate inside users who attempt to access any server on the outside network and then limit the outside servers that a particular user can access using authorization.
The security appliance caches the first 16 authorization requests per user, so if the user accesses the same services during the current authentication session, the security appliance does not resend the request to the authorization server.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/asdm60/user/guide/usrguide/aaasetup.html
Regards
Karthik

Is it possible for non-sap systems to consume BDOCs without conversion?

Hi All,
I am new to CRM. I use SAP Jco API's to connect to SAP from my java application. Similarly now i want to connect to CRM.
Basically the required is to consume or send BDOC across Java application (non-sap system) and SAP CRM.
1. Is there a way to fetch the BDOC info from Jco API's and then consume them in Java application?
2. I read about XIF adapter in CRM, It says convert BDOC to IDOC.
Can you tell me if BDOC's can be sent out of SAP to non-sap systems as is without convert to IDOC or should it be always i have to convert to IDOC/XML to consume from non-sap systems ?
You quick reply is greatly apprciated.
Thanks,
Sowmya

Hi,
Yes. It is possible.
You can use the standard XML interface for Business Partner in the name space http://sap.com/XI/ABA.
Regards,
Masa

In ID CS6, is it possible for a text box to retain its attributes when converted to a form field?

I would like my text form fields to retain Helvetica, 9pt., all caps? or do I have to make these changes in Adobe Acrobat? Any advice is appreciated.
Thanks in advance.

You cannot specify a font in InDesign for a form field. You'll need to
do that in Acrobat.
Bob

Cluster Quorum Disk failing inside Guest cluster VMs in Hyper-V Cluster using Virtual Disk Sharing Windows Server 2012 R2

Hi, I'm having a problem in a VM Guest cluster using Windows Server 2012 R2 and virtual disk sharing enabled.
It's a SQL 2012 cluster, which has around 10 vhdx disks shared this way. all the VHDX files are inside LUNs on a SAN. These LUNs are presented to all clustered members of the Windows Server 2012 R2 Hyper-V cluster, via Cluster Shared Volumes.
Yesterday happened a very strange problem, both the Quorum Disk and the DTC disks got the information completetly erased. The vhdx disks themselves where there, but the info inside was gone.
The SQL admin had to recreated both disks, but now we don't know if this issue was related to the virtualization platform or another event inside the cluster itself.
Right now I'm seen this errors on one of the VM Guest:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1069
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
Cluster resource 'Quorum-HDD' of type 'Physical Disk' in clustered role 'Cluster Group' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1069</EventID>
<Version>1</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14140</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ResourceName">Quorum-HDD</Data>
<Data Name="ResourceGroup">Cluster Group</Data>
<Data Name="ResTypeDll">Physical Disk</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1558
Task Category: Quorum Manager
Level: Warning
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1558</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>42</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14139</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">ServerDB02</Data>
</EventData>
</Event>
We don't know if this can happen again, what if this happens on disk with data?! We don't know if this is related to the virtual disk sharing technology or anything related to virtualization, but I'm asking here to find out if it is a possibility.
Any ideas are appreciated.
Thanks.
Eduardo Rojas

Hi,
Please refer to the following link:
http://blogs.technet.com/b/keithmayer/archive/2013/03/21/virtual-machine-guest-clustering-with-windows-server-2012-become-a-virtualization-expert-in-20-days-part-14-of-20.aspx#.Ux172HnxtNA
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Photoshop CS5.1 64-bit crashes whole system when using Wacom Cintiq 13HD

Hello,
I've got a big problem and Wacom Support/Forum wasn't really that helpful at all, so I hope someone here has the answer.
I'm using:
- Windows 7 Premium 64-bit with Service Pack 1
- Intel i7-267OQM 2,2 Ghz CPU
- Nvidia GeForce GT 635M 2GB
- 8GB RAM
- Adobe Photoshop CS5.1 64-bit
- on an ASUS N55S Laptop
My new Wacom Cintiq 13HD runs just fine while just browsing on the internet, with Adobe Illustrator (so far...) and Easy Paint Tool SAI.
But everytime I open my Photoshop it's just some minutes before my system freezes for a second, than blue screen appears und my whole
System crashes down. Every. damn. Time.
I read in the Wacom Forum that more people have this problem, but all suggested solutions by Wacom just don't work.
Here's the link: http://forum.wacom.eu/viewtopic.php?f=3&t=14060
The one thing I didn't try is using the USB Extensions, so I will buy some tomorow and try that too.
But maybe someone has an other idea that could help?
I tried all drivers Wacom has avaible but it still happens. I updated my Adobe Softwares, my BIOS, my graphic card, I restarted countless times,
but nothing seems to work.
Help me, please!

A problem has been detected and windows has been shut down to prevent damage to your computer
REFERENCE_BY_POINTER
If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any new installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x00000018 (0x0000000000000000, 0xFFFFFA800D767920, 0x0000000000000002, 0xFFFFFFFFFFFFFFFF
Collecting data for crash dump…
Initializing disk for crash dump…
Beginning dump of physical memory.
Dumping Physical memory to disk: 35
And I saw that the problem occurs with Asus Laptops and Dell Precision Laptops.
So when I've got time (-> weekend ) I'll set up my desktop pc again and try it there. Maybe it's one of the Asus drivers?

Is it possible to silence the external ringer on the Pre when using headphones?

When I get a call on my Pre while using the headphones, I'd like to hear the ringer in my headphones only... Currently when I get a call it rings in the headphones AND via the external speaker. Can this be done and if so how?
Post relates to: Pre p100eww (Sprint)
Message Edited by hammerransom on 07-14-2009 11:16 AM

Karl Z wrote:
Hi,
I produce a large number of pages in InDesign.
In each document there are 5 layers. 1 layer with images and 4 layers with language-editions.
For safety and quality control I would like to print out the layer name together with the crop-marks.
Like... Documentname / page number/ layerImages - layer language
Is that even possible? That is...without me having to write it myserlf in the bleed. :-)
/Karl
InDesign's pasteboard, bleed, and slug areas are independent for each document page. Running header text variables in these areas can capture sources on document pages. If you place a text frame with a character style for the layer name, and a character style for the language name, on a layer, and capture them in a character-style-based running header in the slug, for example, the source from whichever layer is visible will appear in the running header in the slug area. Similarly, you can capture other text variables for page number, filename, date/time, etc.
It may take a little fussing to set it up the first time, but thereafter when you change layer visibility, the visible layer name changes automatically.
NOTE: Text frames on master page pasteboards, bleed, or slug areas do not appear on document pages unless they also touch the document page border.
Above: Master page view
Above: Page 1 view
Above: Page 2 view
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Message was edited by: peter at knowhowpro

Losing URL in the remote system when using SOFM

Dear WF Group,
We have a workflow that is created in our cProjects system that starts a remote workflow via RFC in our main R3 system with data that is passed over from cProjects.
One piece of data that is passed is the URL link to the specific project in cProjects. This works about 50% of the time. In those times it does not work, there is sometimes a enqueue error saying that the work item is locked by user WF-BATCH. Sometimes there is no error, it just fails to create the URL attachment.
The basic program flow is:
Create workflow using function module SAP_WAPI_START_WORKFLOW
Attach the URL using function module: ZSWL_SOFM_CREATE_WITH_TABLE
This is similar to the posted question u201CAttachment of SOFM type before triggering a WFu201D, but I didnu2019t understand the answer in relation to our issue.
Any help appreciated,
Al

Hi Rick,
This was done for us by an outside consultant. I'll answer by including that FM:
function zswl_sofm_create_with_table.
""Local Interface:
*" IMPORTING
*"     VALUE(NOTE_TITLE) LIKE SODOCCHGI1-OBJ_DESCR OPTIONAL
*"     VALUE(DOCUMENT_TYPE) LIKE SOODK-OBJTP DEFAULT SPACE
*"     VALUE(WI_ID) LIKE SWWWIHEAD-WI_ID OPTIONAL
*" EXPORTING
*"     VALUE(SOFM_KEY) LIKE SWOTOBJID-OBJKEY
*" TABLES
*"      NOTE_TEXT STRUCTURE SOLISTI1 OPTIONAL
data: region like sofd-folrg.
data: folder_id like soodk.
data: l_folder_id like soobjinfi1-object_id.
data: document_data like sodocchgi1.
data: document_info like sofolenti1.
data: object_content like solisti1 occurs 0 with header line.
data: lines like sy-tabix.
data: ls_zwf_sood type zwf_sood.
*- set default
if document_type is initial.
    document_type = 'RAW'.
endif.
*- create office object
*-- get dark folder
region = 'B'.
call function 'SO_FOLDER_ROOT_ID_GET'
    exporting
      region                = region
    importing
      folder_id             = folder_id
    exceptions
      communication_failure = 1
      owner_not_exist       = 2
      system_failure        = 3
      x_error               = 4
      others                = 5.
if sy-subrc ne 0.
    message e696
            raising error_sofm_creation.
endif.
*- get description
if note_title is initial.
    read table note_text index 1.
    note_title = note_text.
endif.
*-- create office document
document_data-obj_name = 'ATTACHMENT'.
document_data-obj_descr = note_title.
document_data-obj_langu = sy-langu.
object_content[] = note_text[].
describe table object_content lines lines.
document_data-doc_size = ( lines - 1 ) * 255 + strlen( object_content ).
l_folder_id = folder_id.
call function 'SO_DOCUMENT_INSERT_API1'
    exporting
      folder_id                  = l_folder_id
      document_data              = document_data
      document_type              = document_type
    importing
      document_info              = document_info
    tables
      object_content             = object_content
    exceptions
      folder_not_exist           = 1
      document_type_not_exist    = 2
      operation_no_authorization = 3
      parameter_error            = 4
      x_error                    = 5
      enqueue_error              = 6
      others                     = 7.
if sy-subrc ne 0.
    message e696
            raising error_sofm_creation.
else.
store the document info in table zwf_sood
   ls_zwf_sood-wi_id = wi_id.
   ls_zwf_sood-objtp = document_info-object_id+0(3).
   ls_zwf_sood-objyr = document_info-object_id+3(2).
   ls_zwf_sood-objno = document_info-object_id+5(12).
   insert into zwf_sood values ls_zwf_sood .
endif.
*- set export parameter
sofm_key = document_info-doc_id.
now create the handle and update the workitem with the attachment
data:
lv_object_id type swotobjid,
lv_element type swcont-element,
lv_wi_header type swwwihead.
concatenate sy-sysid sy-mandt into lv_object_id-logsys.
*lv_object_id-logsys = 'DR1CL160'.
lv_object_id-objtype = 'SOFM'.
lv_object_id-objkey = sofm_key.
lv_object_id-describe = '<OBJECT>'.
call function 'SWW_WI_OBJECTHANDLE_ADD'
in update task
    exporting
      wi_id                     = wi_id
      object_id                 = lv_object_id
      element_name              = '_ATTACH_OBJECTS'
     do_commit                 = 'X'
IBF_OBJECT_ID             =
   changing
     wi_header                 = lv_wi_header
WI_CONTAINER_HANDLE       =
    exceptions
      update_failed             = 1
      others                    = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endfunction.

Logout crashes system when using fglrx [SOLVED]

Hi guys,
I admit I'm a little annoyed about X related issues with Arch on my thinkpad T400, none of choice is working totally fine on it now. It has ATI HD3470 discrete card and Intel X4500 integrated card, I've tried all available dirvers: xf86-video-ati, xf86-video-radeonhd, catalyst(fglrx) and xf86-video-intel. Here are problem descriptions:
1, Intel X4500 + xf86-video-intel
This scheme is the best working choice at present. Everything is fine, except cannot pass 3D acceleration test in Cedega. glxinfo shows direct rendering is "yes", and openGL direct rendering test in Cedega is passed. With 3D acceleration test failed, I cannot run any games in it. Glxgears shows 420FPS with Intel X4500
2, ATI HD3470 + xf86-video-ati / xf86-video-radeonhd
Annoying! I'm not sure how well the open source driver support my card, surely they are working, but only provide very basically performance. 3D acceleration test in Cedega cannot pass either, while direct rendering is "yes" in glxinfo too! Besides this, the really annoying thing is laptop FAN is keep running with these two drivers, even CPU occupation is ZERO. Glxgears shows 370FPS with radeon or radeonhd.
3, ATI HD3470 + catalyst
This scheme provides best performance, that 3D acceleration test in Cedega can pass, and the game plays smoothly. However, this driver has a frustrated problem: It works fine when first boot up, but if I logout, then X would crash to a black screen, and both keyboard and mouse lost response. Only press power button for 3 seconds to hardly shutdown can leave the mess. More details can refer to: http://bbs.archlinux.org/viewtopic.php?id=62413
Glxgears shows 1200FPS with fglrx.
I guess a comparison is suitable here, with fglrx+ubuntu installed on this laptop, Glxgears shows 3200FPS, and it works totally fine without logging out to black screen problem either. I'm a newbie switched from Ubuntu to Arch, I love the Arch way. But I have to say, I DO NOT like the Arch's X way.
Hope someone who has the same hardware or even the same laptop can help me. Though I don't like to configure X, I like the feeling manually solve problems. Any advice or suggestion or even criticism will be highly appreciated. My xorg.conf are attached in pastebin:
xorg.conf_intel: http://pastebin.com/f49274228
xorg.conf_radeon/radeonhd: http://pastebin.com/f2493d0d9
xorg.conf_catalyst: http://pastebin.com/f3a8545f4
Best regards,
L.Y.
Last edited by leeyee (2009-01-30 09:00:46)

I reinstalled catalyst and now using fglrx driver. I reproduced the problem and paste X server log here, I hope anyone have or had this problem would come on to solve this, seems this problems is old, common and nasty all together.
My system:
Thinkpad T400
ATI Radeon HD3470
xorg-server 1.5.3-4
xorg-server-utils 7.4-2
catalyst 8.12-3
catalyst-utils 8.12-1
kernel26 2.6.28.1-1
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux thinkpad 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 13:03:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Configured Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "ATI HD3470"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Configured Keyboard"
(**) |-->Input Device "Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Configured Mouse
(WW) Disabling Configured Keyboard
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/0, 0xcfff0000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x8775500
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7f55400]
Fatal server error:
Caught signal 4. Server aborting
Reproduce problem as follows:
1, Install fglrx as driver for ATI 3470 on LAPTOP
2, Boot up and login gnome will succeed every time.
3, Logout:
3.1 If using GDM
Logout then it goes into a black screen, both keyboard and mouse lost response, only hard shutdown helps.
3.2 If on runlevel 3
Logout succeeds, will back into user console. Log into normal users in other consoles succeeds. If now run startx, it will generate above quoted error: "Fatal Server Error: Caught signal 4". After this, commands such as su, ps, sudo, or as root log into other consoles will cause Segment Fault, or even Kernel panic. As these situations happen, only hard shutdown helps.
I've also tried these workarounds found with google or in other forums:
1, Edit /etc/gdm/custom.conf to set X server always restart value equal 1.
Does not help. Actually, this problem might not caused by gdm, because I boot into runlevel 3 would also have this problem.
2, Edit /boot/grub/menu.lst to add "nopat" option into kernel line
Does not help, the problem remains.
3, Build catalyst 8.11 with ABS
Does not help, with catalyst-8.11 X will boot into black screen for the first time too. I'm not sure if I build it correctly, it has a 2.6.27.patch in abs, but I'm using 2.6.28 kernel.
4, Use D-sub instead of DVI
I'm on LAPTOP, don't have a choice to change to D-sub connector, so I don't know if this help.
5, Remove .Xauthority file or edit /etc/ati/authatieventsd.sh file as https://bugs.launchpad.net/ubuntu/hardy … bug/118605 suggests
Does not help either, It might not be X authority's problem. But I'm not quite sure.
Alright, I hope these details have made myself clear, because of my poor English. Hope you guys help, thanks in advance!
Last edited by leeyee (2009-01-25 06:33:35)

Is it possible for a guest system to spy host system when using virtual maschine?

Similar Messages

Maybe you are looking for