Is it possible for an ipod to be disabled for a really long time

my friends ipod touch is diabled for 23 million minutes. how can i fix this and has anyone had this happen to them?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New

Similar Messages

Does mountain lion comes with graphic, Does mountain lion comes with graphi, Does mountain lion comes with graphic driver updates? I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.

Need some advice

I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.
Snow Leopard is no longer being updated, 10.6.8, was the last update. So, a "really long time," will be forever.
Yes, ML has graphic driver updates, but since there is no way to guess whether it impacts your unmentioned hardware, there is no way your question can be answered.

I just found my ipod touch 4 generation and it's been dead for a really long time. I've left it charging and it still won't do anything. What should I do?

please help.. I need pictures that I have in there.

Try:
- iOS: Not responding or does not turn on
Note recovery mode/DFU mode/restoring the iPod wi; erase the iPod
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Whenever my ipod touch runs out of battery it gets disabled for a really long time and won't let me connect to itunes

I dont know what to do!! Right now its disabled for 22,209,010 minutes!! Please Help!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..

Xquery Problem for for takes really long time

I am having problems with an issue using doing an xml xQuery from Oxygen to a dbxml database.
I can't list the code because it is quite detailed and on a secure computer, but the concept is simple.
I have an xquery that looks like this:
Bunch of let statements
<results>
Let $y := "one"
For $thing in $list_of_things
More let statements
Where ....
Return
Html and more embedded xquery expressions including for, where etc.
</results>
I run a query with $y := "one" as above and it takes 1.5 seconds.
If I modify the query slightly by replacing the "let $y := "one" with an additional "for" it takes 250 seconds, though the results are the same as before.
Why did it take so long?
All I did was add the for which only has one item in it so it should do the same thing?!
Modified Query
Bunch of let statements
<results>
For $y in ("one")
For $thing in $list_of_things
More let statements
Where ....
Return
Html and more embedded xquery expressions including for, where etc.
</results>
Thanks for any help anyone can offer, Curt

Curt, perhaps you'd need to provide a bit more relevant detail and in simpler form in order to get a helpful answer. On the face of it, changing let to for in that position might have an impact simply because you are changing a simple variable assignment followed by a for clause to a nested for...for clause. Is your "one" value a dummy for demonstration purposes or the actual value in your code? On the face of it, it looks like for each loop of the first for, you'd be repeating the execution of all the subsequent code. Without more context it's difficult to judge what would happen exactly.
I suspect that if it's XQuery you're needing help with you'll get more responses on a dedicated forum. For help with DBXML performance issues you're probably going to need to tell people about your indices and be more explicit about their relationship to your query, in order for them to understand the problem.
If that's not helpful just review your code again and continue experimenting.
Tim

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My iPod touch is disabled but I no longer have a laptop to sync to - how do I fix it

My iPod touch is disabled but I no longer own a computer to sync it with - is there another way it can be fixed

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Also:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.

When we run $CRS_HOME/root.sh scripts-This hangs for a very long time

Hi,
At the time of oracle cluster ware installation, when we run $CRS_HOME/root.sh scripts…
bash-3.00# /export/home/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/export/home/oracle/product/10.2.0' is not owned by root
WARNING: directory '/export/home/oracle/product' is not owned by root
WARNING: directory '/export/home/oracle' is not owned by root
WARNING: directory '/export/home' is not owned by root
WARNING: directory '/export' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d1s1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
This hangs for a very long time; I controlled out of it and re-run it. The same result, it stops at the last line for hours now. Any idea?
Thanks
ANup
Edited by: user485641 on २५ अप्रैल, २००९ ७:०५ अपराह्न

what os ? what Oracle version?
What you find on cluster log.... ?

Hyperlinks (a href) have been outdated for a very long time

I have felt that "a href" hyprlinks have been outdated for a very long time.
so much so that they should no longer be known to most developers (like frames and html based hyperlink maps)
the only thing they can do is cause a new page to load.
The event which causes this has to be a click (on an image, string of text or other compatable html object).
and the event itself has to be the loading of a new page.
by comparason by using javascript you can use ANY html attribute (Onclick, OnMouseover, OnMouseout ect) to trigger to event
or you can use ANY event listener to trigger the event.
You could also set these to only trigger under specific circumstances. (for example an onclick event followed by a mouse over at least 3 seconds later)
and the event which occurs can be anything
it could be a simple page change
or it could bea page change with a modificaton (such as a preloader displaying to hide the fact that the new page is loading)
or it could be a page change, or an animation, or anything else you can think of determined by an IF statemen
furthermore by using AJAX or JQUERY you can have an event which alters a database or SQL file or, in simple cases plain text file based on the users actions - and then determines the action it performs based on the content of the database or SQL file or text file
This coveres everything from very simple actions
to very complex dynamic actions which have an infininte range of possibilites
so
why are is a href still used?

I don't think any serious web developer can afford to make sweeping assumptions like this. Anchor tags are stable and 100% reliable on all platforms & web devices. It might surprise you to know that many people disable client-side scripts for security reasons. How will these people interact with your site?
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Nancy O.

My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

Do you have current backups?
Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
Your appointment for an evaluation is FREE, in warranty or out.

Query running for a very long time

Hi I have a sales Query which is running for a very long time,
It is built on a multiprovider. The multiprovider gets feed from cube and DSO.
It is taking very long time to run.
I need to do some performance tuning can you please suggest.

Hi Ravi,
First maitain BW statistics for that query and after that go to se11 and give table RSDDSTAT. just check how many records selected in data base and how many records transferred.
according to this statistics create aggregates by giving propose aggregates by using statistics tables. after running a query check in RSRT whether the data is coming from aggregates or not.
do not exclude any selections try to include in query restrictions.
try to create secondary indexes.
let us know the result.

Hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!

hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!

What laptop? What operating system? What version of Safari?

OS 10.3 - Hub shows huge "message deleted" sign for a very long time

I genereally really like the 10.3 OS update, but there has been a change to the hub which is puzzling me:
When, for example, I open my email account in the hub, I get the option to show trash bins next to all messages so I can delete them more easily. Great!
If I do that, however, I get a huge sign "message deleted / retrieve message" (or something similar, my OS is in German) - and it covers one third of the display for a very long time (four seconds or so), making the feature super slow instead of fast. Because, if I want to delete the next message, I will have to wait for it to disappear. Otherwise I might retreive the deleted message and start from zero again. Most of the time I cannot even see the next message which I would like to delete as the pop up is covering two to three messages entirely.
The problem would be solved if a) the pop up sign were significantly smaller or b) it would not show up for such a long time.
Is there any fix to this issue?

Hi,
I know what you mean but I think for the moment it can ot be changed. JSanders has opened a feature request post.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Feature-Requests-beyond-Blac...
I recommend you put this item there. Hopefully someone from BB reads it and changes it for the future.
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

My iPad getting very warm when i use it for bit in longer time

Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?, Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?

The Temperature warning usually appears when the iPad has been set in a place where it gets so hot to the touch that you'd almost burn your hands if you picked it up. The temperature caused by the processor or charging the battery should never reach that level. If you feel your pad is too warm when you are using it Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Hi, is there a possibility a text message /SMS) that was deleted before a long time to restore

Hi, is there a possibility a text message /SMS) that was deleted before a long time to restore

It can be restored only if you have an iTunes or iCloud backup that contains the message. If not it is gone.

Is it possible for an ipod to be disabled for a really long time

Similar Messages

Maybe you are looking for