Is it possible for FM V8 files to be saved so they can be opened and updated using FM V6.0?

Is there any way of saving a FM V8.0 file so it can be opened and updated by a user still running FM V6.0?
Many thanks.

As for code mapping, there is a encode/decode package for the Perl scripting language which permits converting to/from unicode to nearly all codepages which have been in use on PC systems for the last some 20 years.
With a little script it should be possible to reliable transform the text portions of a MIF file.
If necessary, I'd be able to write such a script for a moderate fee.
Helge

Similar Messages

How can I send a jpg picture file to someone so that they can download it and use it? I can send a picture in an Email, but they can't open it

How can I send a jpg of a photograph to someone so that they can download the file and use it to put into an article? I can send it in an Email, but there doesn't seem to be a way for the recipient to extract the jpg from the Email

If the person is using a pc, make sure the picture has the suffix .jpg
Example: your picture.jpg

Safari 6 (7536.25) on Mid 2007 Mini running Lion damages pdf files when downloaded. Adobe reader can't open them; downloaded via Chrome they can be opened.

When I download pdf files using Safari 6, they can't be read by Adobe Reader; using Safari to read them isn't a solution, because Safari doesn't allow them to be printed page by page. The same files, downloaded by Chrome, by contrast, can be opened and printed. Is there a patch for this problem?

Eliot Hudson wrote:
I receive a message that:
"Adobe Reader could not open [form name.pdf] because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
Go to: Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Trash the Adobe Reader app from your Applications folder.
Empty the trash.
Go to: http://get.adobe.com/reader/enterprise/ and download the FULL installer to replace Reader and the plug-ins.
Redownload the Forms.

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

Is it possible for my neighbors to steal my FIOS like they could with cable?

Is it possible for my neighbors to steal my FIOS like they could with cable? I was just wondering because I get weird blips and image interuptions while I'm watching TV.

No.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks?

I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks? I am currently adding more ram so it will have 32gb of ram, i have 2 250gb HDD but adding a 250gb SSD , and have a ATI Radeon HD 4870 512mb that i will most likely upgrade to an ATi Radeon HD 5570 1gb.

The SSD will boot fast, but the real change is launching 10 programs in 10 seconds and being able to use them. (20 seconds for a few big suites).
I would not add or upgrade to 32GB RAM. You can get 8 x 2GB for $100 on Amazon.
Those 250GB HDD are "old" and slow and overdue to be replaced, reformat and use t o backup the system.
Samsung 250GB SSD is down to $150 or so on Amazon also.
The 5770 is gone, hard to find, EOL and over charged for when you do find one.
you could look into how to use a PC 6870 or others.
Or, you could hold out and wait for a refresh of Mac-Mini which can be just as fast or faster and run Mavericks.

Is it possible to make .dll file of .vi project then load it to CVI and use the APIs in the dll to CVI project

Is it possible to make .dll file of .vi project then load it to CVI and use the APIs in the dll to CVI project?

Hi Kumar,
It is possible to make .dll from Labview and i think we can call the same from other programming application also.
Pls refer the
below link
http://zone.ni.com/devzone/cda/tut/p/id/4038
GAnesan KAni

Is it possible for your iphone to be hacked so that someone can text message people in your contacts (and send pictures)? If so can you trace the hack

Is it possible for your iphone to be hacked so that someone can text message people in your contacts (and send pictures)? If so can you trace the hack and how can you stop it?

Ugh I am not doing any of those things.
I do have alot of issues with my email getting hacked often, could that have anything to do with it?
I also do not believe my phone is jailbroken but to be honest I am not very smart with this.
Basically text messages (inappropriate) were sent to a person in my contacts...and a text message conversation was had for about 30 that I had no idea was even going on. I noticed it on my ipad later (they are synced and normally recieve all the same messages etc). The conversation then just ended out of no where.
Very odd...and I am nervous that someone has control over my phone.

Trying to back up iPad to external hard drive, "iTunes library file cannot be saved. The disk you are attempting to use is full."

This issue is somewhat complex so I will try to explain it as clearly as I can. Any help will be greatly appreciated.
It all began when I kept getting popups from my iPad saying that I had not backed up since May. I realized that was pretty dangerous so I decided to finally try syncing it to iTunes, though I had avoided doing so for so long because I knew that when I tried there was no room on the computer. I then remembered that I have an external hard drive with plenty of storage space, so I got that out and set it up with a folder to move iTunes and the backup into.
On iTunes I went to the Advanced Preferences and changed iTunes Media Folder Location to the G: folder, with the keep organized box checked. I also copied the previous backups from the original C: drive to G: so that I could delete the ones on C:.
I used Junction Link Magic to link my now empty MobileSync backup on C: to a new (JLM would not work unless it was empty) backup folder on external hard drive G:.
I plugged in my iPad to iTunes to sync it, and while it was backing up I checked the new folder on G: to make sure that the backup was being put there. It was.
However, about halfway through I got the message "iTunes library file cannot be saved. The disk you are attempting to use is full."
My question is Why? If it is being made in a 1.5 terabyte hard drive now, and not the computer, why is there no disk space? My guess is that it must still somehow be saving to the computer. But how? And how can I get it to save solely on the G: drive where there is enough room?
I am running Windows XP and the latest version of iTunes.
An additional but not as crucial issue:
Much of my music has been lost, with the being displayed next to the songs in the iTunes library, and only 50 (purchased) songs remain on my iPad. This was because those missing songs were stored on a different external hard drive ( I:). However, I copied many of the music folders on I: over to G: so that everything could be together. I am wondering if it is possible for me to get these songs back onto my iPad. But this is not my most important issue right now, because I believe that once I get the first issue solved I can simply plug in I: and G: at the same time while syncing the iPad, and get the songs back.
Note: I have come to realize the iTunes program itself is still under Program Files in the C: drive. Does this have to do with anything?

Short term, free up some disk space. Long term, move the library to a bigger drive.
tt2

HT1338 I have a lot of files called FILE0001.CHK etc. on my MacBookPro - they cannot be opened and an app search produces no solution. Does anyone know what they are please?

I have a lot of files called FILE0001.CHK etc. on my MacBookPro - they cannot be opened and an app search produces no solution. Does anyone know what they are please?

Thanks Charlie and Leroydouglas - apologies for not responding sooner - I am new to the Community and couldn't see how to respond to your queries without 'replying' to myself - hope this works. I do not use Windows on my Mac but it is possible I ran ScanDisk on my previous Windows laptop. Perhaps I have inadvertently brought these files to my Mac?? Can I delete the files or will I be losing something I cannot verify? So appreciate your input - thank you.

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?

Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?
We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible?
We both have itunes and apple ID's of our own right now, but since getting married, we are deleting these e-mail accounts and sharing one. How can we make this work?

You may use the same Apple ID for iTunes and App Store purchases, but using different iCloud Apple IDs is recommended.
If you use the same iCloud account on your iPhones it will sync all of your contacts, reminders, and notes automatically and it could be a pain. I don't know exactly how you would want to have the iCloud accounts set up on the Macs, because I don't know exactly how you use them. (I am assuming you share?). But you can do whatever you like, you can even keep the same iCloud accounts, etc but you may want to disable the syncing of certain items, because reminders for ones phone popping up on the others automatically would probably get annoying, but that is just me.

How multiple users can open and update it same time in Sharepoint 2010, excel file

we are using SharePoint 2010, multiple users can open and update the file at same time in SharePoint, I have searched a lot and
read it, some suggestions were can create the file as share work book and then save on Share point and other were its supported only with Office web Apps, Excel Web App, we don't have office Web apps or excel web app, is there any other suggestion,
any help will be great, thanks in advance

Hi,
You need office web apps for co-authoring, see Software version requirements for co-authoring in SharePoint 2013 and SharePoint Online section in below link -
http://technet.microsoft.com/en-us/library/ff718249(v=office.15).aspx
and
http://office.microsoft.com/en-us/sharepoint-foundation-help/document-collaboration-and-co-authoring-HA102772333.aspx
Edit: Link for SP 2010
http://technet.microsoft.com/en-us/library/ff718249(v=office.14).aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system i

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..

Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.

File Error: The Specified file is open and in use by this or another app...

I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application."
After reading this, I quit out of FCP, restarted my computer, opened FCP, nothing other program, tried to render again and same thing happened. It renders part of it then the error message pops up, then I can render again and it will do another percent then it will pop again and so on.
Suggestions, or does anyone know why this happened? Thank you very much for your time.
A

okay - don't know where you've got your scratch disc set but hopefully it's to another drive other than your boot.
The same drive where your render files should be located, ie some drive other than your boot drive.
Can you copy the jpegs over to that drive into a folder.
Delete them from your tl, delete them from your proj. Save your project. Close fcp.
If they're on your boot drive - delete them.
Reopen fcp and Reimport them from the new location.
Sorry for all the steps - but we have no idea how you have configured fcp or your level of experience. Trying to cover all the bases ...

Is it possible for FM V8 files to be saved so they can be opened and updated using FM V6.0?

Similar Messages

Maybe you are looking for