Is it possible for me to enable single key tab switching with, or without TabMix+?

If this is possible, please elaborate carefully because I am an idiot.

Is your base station acting as a NAT router or a bridge?
From your description it sounds like it's running as a NAT router, where it has one IP address and it shares that address amongst other wireless clients, typically in a 10.1.x.x. subnet.
In bridge mode the base station simply links the wired and wireless networks on the same subnet.
You can toggle the base station settings by checking the 'Distribute IP Addresses' under the Network tab in AirPort Admin. If it's turned on the base station is running as a NAT router, if it's off, it's a bridge.

Similar Messages

  • Is it possible for someone to scan someone else's card with Apple Pay?

    Hi All,
    Can't find a concrete answer on this, but maybe someone here knows.
    Is it possible for someone to scan someone else's card into Apple Pay?
    My fear is now that apple pay is out there, picture this:
    Someone goes and buys an "Unlocked iPhone" with cash from a apple store.  So now its not locked or setup to anyone or any carrier.
    That same person works in a restaurant.  Takes your card at checkout and walks off to ring up the bill.  Instead, they scan your card and enter it into Apple Pay on this new unlocked device.
    They now have your card, verified the security code on the card, entered your name, and then (on wi fi) it authenticates and sets itself up.
    They then give you back your card, you leave.
    After their shift, they go and pay $1000 on your card , then delete it, and next day, they come back and do it all over again.
    Not saying this is feasible, but what is stopping someone from doing that?  Today, they need your billing info if they do, which they wouldn't have, but this seems to be very quick to authenticate and allow that device access to spend. 
    Just wondering if Apple would be asking for authentication via apple ID, or something else to prevent fraudulent scanning of cards.
    Any thoughts?

    This was posted a little bit after your query.
    Note: This article is misleading in that the "security issue" wasn't really about Apple Pay...
    http://consumerist.com/2014/10/24/apple-pay-lets-man-scan-use-wifes-citi-credit- card-without-additional-verification/
    To summarize, your bank will usually send a code to your phone number or email to authorize the card.

  • Possible for POJO to have a set of children with only one table?

    I have a situation that I'd like to model with Hibernate, but I'm not sure how to proceed.
    I've got two objects: Filter and Criterion. Filter has a java.util.Set of Criterion children.
    I currently have a schema with two tables: FILTERS and CRITERIA. The FILTERS table has nothing more than a primary key. CRITERIA has a foreign key relationship with FILTERS. I have a FilterDAO that will query the FILTERS table and bring back a Filter object that will use the one-to-many, parent-child relationship between the two tables to populate the Set.
    A DBA here has pointed out that the FILTERS table is anemic - it has nothing more than a primary key. She suggested that I eliminate it and go directly against the CRITERIA table to populate that Set.
    I'm so used to thinking about these things in terms of primary/foreign key relationships that I'm not seeing how to accomplish this with Hibernate. Is it a mere <set> declaration that populates the child java.util.Set<Criterion>? The WHERE clause would have to include a filter type. Is that where the JOIN has to come? Is the two table schema absolutely necessary, or can I get away without it?
    Hibernate allows the object model to be more fine-grained than the schema. The classic example is a PERSON table that has address information it in. I can model this on the object side using Person and Address classes and ask Hibernate to fetch the Address state as a component. Is this the same situation as my Filter and Criterion?
    Sorry if I sound confused, or if the question rambles. I guess I don't understand Hibernate well, because any time I get off the beaten path I fall into a hole.
    %

    Well, you're more advanced than me with Hibernate. I'd be very surprised if that were true, DrClap. 8)
    I can't even get one-to-many relationships working the
    way I'd like, every time I think I have it right
    (i.e. just the same as the examples) it gives me some
    guff about backreferences not existing.I'm finding Hibernate to be a bit difficult, especially when I don't have control over the schema. Our DBAs don't seem to follow all the "best practices" that Hibernate recommends.
    So my advice might not be the best. But if you don't
    have the Filters table, but you still need to get all
    the Criterions with "filter key" = x, then isn't that
    just a Query? Sure, you get the data back as a List,
    but you can wrap that in a Set pretty easily.I've gone back to the DBA and concluded that we have to have a FILTERS table (there's a FILTER_TYPE descriptor field that I've added). It's back in, so the 1:m with CRITERIA should work fine.
    But it begs the question: Does Hibernate and O/R mapping demand at least one table per object?
    If I look in "Hibernate In Action" on page 92, it says "A major objective of the Hibernate project is support for fine grained object models" - more classes than tables. There should be an adjective "persistent" applied to classes in that phrase, because I can have many more classes that are not persisted.
    So I take this to mean that the limit is one persistent class per table, but never less. True?
    %

  • MapEventTransformer for MapListener on a single key

    I have a MapEventTransformer that works fine when I register it against a filter using this approach:
    cache.addMapListener(listener, new MapEventTransformerFilter(filter, transformer), false);
    Is there a way of using it when registering against a key?
    addMapListener(MapListener listener, java.lang.Object oKey, boolean fLite)
    I could register using a filter based on the key, but I'm concerned that this may not be very efficient - even if I use a PartitionedFilter to restrict it to the partition containing the key.
    The ultimate objective here is to transform the event to include data from a decoration on the value object, is there a way of doing that other than by a MapEventTransformer?

    Hi,
    Only MapEventTransformers can change what data is transmitted over the network for the event. If by default decorations are not included, then you need to put them in, so you would need a MapEventTransformer.
    Best regards,
    Robert

  • Is it Possible for iTunes 10.5 on Lion OS sync with Outlook?

    Hi all,
    I am a newbie to Mac, I want to know if Itunes 10.5 running on Lion can Sync with Outlook 2011.
    When i Plug my ihpone in the Itune shows "sync with Ical, Addressbook" instead of "sync with outlook" where all information on address book, calander, notes and etc will be all managed under outlook..
    Please advice
    Thank you.
    ralph

    Hello, heatsiphonman,
    I am having the exact same issue with my 5G iPod. I tried a clean restart (with no memory of open windows), and all the other suggestions via the support website and it's still a no-go. Not sure where to go from here. It seems like it may be a Lion issue or a combination of Lion and iTunes 10.5. I may take it in to an Apple store and see if I can get it to sync there. Meanwhile, I'll keep a close eye on this topic to see if anyone else might be having this issue.
    Mike.

  • Is it possible for someone use there Facebook through my iPhone with out havering my phon

    Can someone use there Facebook thought my phone and not have my phone

    Miss chappy wrote:
    I have Facebook logins in my history on my phone that I didn't do
    Likely that is from other apps on your phone that you have allowed access to it.

  • Is it possible for an external device to burn out the USB port?

    I think the available current of the USB port is 500 mA. If a USB device can work with a current of 500mA ~ 600mA, is it possible for it to burn out the USB port with 600mA current (larger than the safe 500mA) when connected? Or the port can never provide a current larger than 500mA?
    Thank you.
    P.S. The USB device I worry about is a pair of USB warm slipper (to be worn on feet in cold winter). Its label reads "5V / 2.5W", which should be safe. But I once connected it and a mouse to a USB hub, then to a single MBP USB port, and the mouse stopped working in a few seconds, and came back normal only after I switched it to another port. Now the slipper is connected to a port by itself, but I am just afraid that the USB slipper can go malfunctioning all of a sudden and drain a lot of current to burn the USB port.

    ...But I once connected it and a mouse to a USB hub, then to a single MBP USB port, and the mouse stopped working in a few seconds, and came back normal only after I switched it to another port....
    Likely the hub is only barely able to handle the 500mA requirement.  Many powered USB hubs have "cheap" power adapters and can't handle any high surge situations.  Many devices like heating elements and motors have "surge currents" where the initial powering on of the device has a much larger current flow than during normal usage.  Think of it like riding a bicycle.  You have to push hard on the pedals to start off, but it's easier to pedal after the bike is moving.
    ...Now the slipper is connected to a port by itself...
    If you mean the device is plugged into the Mac's USB port, then you should know that all Macs for the past few years provide more than the 500mA minimum for USB.  Some other computers also provide higher power.  But most USB hubs I've seen were limited to 500mA.
    If you are plugged into the hub, not the Mac, then the power adapter for your hub may be barely adequate or possibly even defective.
    ...but I am just afraid that the USB slipper can go malfunctioning all of a sudden and drain a lot of current to burn the USB port.
    IMHO, I would stop using the heater with any computer USB port.  There is always the possibility that eventually something could short out in the heating element and cause a catestrophic surge through the USB port.  The electronics in computers are quite delicate and I'd be paranoid about the device damaging my computer.  (BTW, I have an electrical engineering background so I'm paranoid about power issues all the time anyway. )  Even if the heater is plugged into a hub, the surge current could damage the other devices plugged into the hub.  While not as catastrophic as a dead computer, I'd still be irked to have to replace my mouse, digital camera, printer, webcam, etc.
    Instead, I recommend plugging the heater into it's own "power adapter."  One of those that give a USB port to charge a cellphone or whatever.  Plug the power adapter into a power strip.  Place the power strip in the floor next to the slippers.  That way you can conviniently turn the strip on and off with your toes as you're putting on your slippers.

  • Adobe Offline Form - Parse method is not possible for this type

    Hi All,
    I have developed an application for the offline scenario of interactive adobe form. I tried to load the adobe form from my desktop. After pressing the button "Display form" it throws an error "Parse method is not possible for this type".
    If I include wdContext.getNodeInfo().getAttribute("pdfObject").getModifiableSimpleType() in the doInit() method of the view I receive this error -
    com.sap.tc.webdynpro.progmodel.context.ContextException: MappedAttributeInfo(UploadView.pdfObject): must not modify the datatype of a mapped attribute
    When I comment it out and upload I receive the error enclosed -
    Parse method is not possible for this type
    Can someone please help me with a step by step solution to this problem?
    Any help is highly appreciated.
    Many thanks,
    Divya

    Hi Divya,
    Please try to do it as stated below:
         IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute("pdfObject");
         ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
         IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType)type;
    Try putting the code in wdInit() or wdDoModifyView().
    Let me know if you still face the issue.
    Regards,
    Arafat

  • Is it possible for new ipad buyer change for Ipad 4?

    i heard that apple had stop produce the new ipad due to the ipad 4 is coming. it's really unfair for new ipad buyer who just buy it this year. is it possible for the new ipad buyer change their ipad with the ipad 4?

    This is just a website scam that's going around right now. It cannot infect you in any way.
    Some people have reported being directed to the App Store to download a particular camera app. If you are, do not download it. It cannot infect you with anything, but you don't want to reward the scammers by downloading their app. If you downloaded the app and paid money for it, contact Apple to dispute the charge.

  • Desparate for a single key on left side of keyboard that serves as DELETE

    I am running a MacBook Pro on 10.5.8 using Microsoft Word 2008. My right arm has aching tendonitis and enabling my left hand to delete stuff would help a ton.
    Thus, I desparately need a single-key (not function+key or command+key) that DELETES letters or words in Word, that sits on the far side of the keyboard. I'd give up fn, or `, or even capslock. **** even tab!
    I've tried DoubleCommand. It will remap delete onto the CapsLock key but then only deletes a character every other key press (apparently only works when capslock turns ON). This *****.
    KeyRemap4MacBook says it will remap ` to DELETE but that simply does not work in Word. It can also remap fn to Command_L but that also doesn't work (yes, I assigned Command_L to DeleteWord in Word's keyboard shortcuts).
    I am desparate to keep writing and save my right arm's tendons! Please help!!
    Thanks.

    You should be able to reassign one of the F1~ series keys via the
    Keyboard and Mouse system preference panel; or maybe if not in
    there, see the Univeral Access; you may be able to also use an
    option by the name of Mouse Keys.
    There also may be some other possibility, since there are folks
    out there who have used two mice; and other set-ups. Even a
    few who have used their feet to control their computers.
    A way to use a Script (automator) to create a means to select/delete
    words would be one consideration; however it may launch improperly.
    • Mac OS X keyboard shortcuts:
    http://support.apple.com/kb/ht1343
    (Control - D and Control - H: delete before & after Cursor)
    • How to turn Sticky Keys and Mouse Keys on or off:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8565.html
    The DoubleCommand app supposedly has a way to make the Caps Lock
    button work as a Delete key, according to reader posts on this topic who
    had been using a MacBook computer and needed a left-side Delete key.
    {An issue exists in assigning a key to do a different function, when some
    other Application needs that key, as-is (or as-was) to perform tasks in it.}
    However, the native means of re-assigning a key function in Sys Pref>
    Keyboard & Mouse panel, or some workaround in Universal Access
    may be something you can customize or use directly.
    The topic has been discussed in these user boards before your post:
    http://discussions.info.apple.com/message.jspa?messageID=11668747
    While I haven't really looked into this, there should be more than a few
    ways of making a left-side Delete key out of some other key, in the OS.
    Perhaps someone with more key assigning experience has better ideas?
    Good luck & happy computing!

  • Is it possible to password protect a single app like Mail?

    Is it possible to password protect a single app like Mail?

    Password protect the Mac Mail app is useless,and would not prevent access to your mailboxes.Your email is stored in files under your home folder,so you must password your mail folder.
    See How to password protect mac Mail for more details

  • No goods receipt possible for purchase order 4701088161 00050

    Dear SAP Gurus,
    The Error is coming
    No goods receipt possible for purchase order 4701088161 00050 when we create goods receipt note only 39 qty.
    done..they want all 99 qty.come in single goods receipt....what exactly problem facing at the time of posting???

    Hi,
    Pl. check whether the Goods Receipt has not been done already for this PO.
    Also, check the message details by clicking on the question mark for the message, so that you will get exact reason, due to which the message is being given.
    Regards,
    Prashant Kolhatkar

  • Enable single item recovery with two retention settings at the database level.

    Hello All,
    We have an Exchange 2010 SP3 RU4 environment and planning on moving from third party archives solution to Native Exchange archives for cost reduction purposes, upgrading to Exchange 2013 to benefit from added in place features is not within scope at
    this stage.
    We are looking at implementing the following steps and want to know if it will work:
    1-Create archive DB(s) as per our usage and growth projections
    2-Enable archives for all our users and migrate current archive content to it.
    3-Create Retention Tag/Policy to move all records from live to archive "Age limit for retention" 90 days (no retention tags on the policy)
    4-Enable Single Item recovery for all of our users (script the same to run twice daily to enable SIR for newly created accounts)
    5-Set the "Keep Deleted Items" on the Live DB(s) to 90 days and the Archive DB(s) to 7 Years
    6-We are NOT using Legal Hold or plan to use it except on per as need basis
    Are we accomplishing the following:
    1-Items are automatically archived after 90 days
    2-Items archived now have a 7year retention based on the "keep deleted items" set for the archive DB(s)
    3-Items copied back to the live mailbox by a user will be returned to the archive database the next time the folder assistant runs against this user account (based on load or if run manually)
    4-Hard deleted items by a user is recoverable as long as the email record is within the retention period set at the database where it resides.
    5-Hard deleted items are recoverable using MFCMapi or by a restore.
    6-Items are permanently purged on the archive DB(s) after 7 years.
    Any input, ideas, recommendations, clarifications would be greatly valued and appreciated.  
    Ash

    Thanks CodexCZ,
    So, SIR will "kind of" do the same as the retention tag except I can use different durations based on the limits on each DB? am I correct?
    thanks again.
    Ash

  • Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

    Hi all ,
    I have a requirement to Post Cash Journal Document using FBCJ tcode.
    Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
    for exp:
    pk   GL a/c   description       amount   cost center  profit center
    40  400101  telephone exp   500        1403            P 1000
    40  400101  telephone exp    100       1404            P 2000
    50  200100  cash in hand      600-                             
       This is My requirement  is it possible in fbcj
        Please suggest me.ASAP.
    Regards
       Naresh.

    Hi,
      This you can do it in two ways:
    1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
    (This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
    After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
    2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
    Or
    You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
    I hope this should help you.
    Regards
    Avisek Bhardwaj

  • Is it not possible to give the select single field without an into clause

    Hi,
    i have to check whether my input value( only one filed) is available in the table.
    for eg i need to check whether company code is available in the table t001.
    then i will give .
    data lv_bukrs type t001-bukrs.
    lv_bukrs = 1010.
    select single bukrs from t001 where bukrs = lv_bukrs.
    here its asking for me to give a vaible to store the bukrs that is
    select single bukrs into dummyvalue from t001 where bukrs = lv_bukrs.
    Is it not possible to give the select single fieldname without an into clause

    Its Possible by declaring the tables statement
    <b>tables : AFKO.
    select single * from AFKO where <condition>.</b>
    If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
    An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
    Notes
    When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
    If accessing tables for which SAP buffering is planned for single records, the SAP buffer is bypassed if the addition SINGLE is not specified. This behavior depends on the current implementation of the database interface and may change in future releases. In particular, it should not be used to bypass the SAP buffer. You should use the explicit addition BYPASSING BUFFER for this instead.
    The addition SINLGE is not permitted in a subquery.
    Regards
    - Gopi

Maybe you are looking for