Is it possible for me to view a Powerpoint slideshow in Keynote??

My professor gives us the options to download and view her powerpoint slide shows on our laptops or print them out.. But I can't seem to get it to work. I looked into Powerpoint for Mac, and tried to download the 60 day free trial, but it wouldn't open properly. Same thing with Powerpoint viewer '98, and '04. All of them wouldn't open correctly.
Any help on how I can view Powerpoint slides on my Macbook Pro?

Keynote should open PowerPoint presentations, but your best bet may be to look at the free Open Office or NeoOffice suites, as they are designed specifically to be compatible with MS Office.

Similar Messages

  • Is it possible for Apple to add "key" to the view options selection?

    Is it possible for Apple to add "key" to the view options selection?

    DJ1970,  Unfortunately no.  iTunes does not have the key in the database.
    People who want to know the key of a song can use (unless they already have perfect pitch!) key detection software such as Mixmeister. 
    Once you know the key, iTunes does not even have a field to store it, although you could stick it into Comments or some other unused text field such as Grouping.  These fields are indeed viewable in iTunes.

  • Is it possible to create materialized view log file for force refresh

    Is it possible to create materialized view log file for force refresh with join condition.
    Say for example:
    CREATE MATERIALIZED VIEW VU1
    REFRESH FORCE
    ON DEMAND
    AS
    SELECT e.employee_id, d.department_id from emp e and departments d
    where e.department_id = d.department_id;
    how can we create log file using 2 tables?
    Also am copying M.View result to new table. Is it possible to have the same values into the new table once the m.view get refreshed?

    You cannot create a record as a materialized view within the Application Designer.
    But there is workaround.
    Create the record as a table within the Application Designer. Don't build it.
    Inside your database, create the materialized with same name and columns as the record created previously.
    After that, you'll be able to work on that record as for all other within the Peoplesoft tools.
    But keep in mind do never build that object, that'll drop your materialized view and create a table instead.
    Same problem exists for partitioned tables, for function based-indexes and some other objects database vendor dependant. Same workaround is used.
    Nicolas.

  • Is it possible for a module to remember last viewed slide and user interactions without an LMS?

    I am developing a captivate module (using Captivate 6) that can be run either off a local hard drive or web server (not an LMS).
    I am hoping that the user will be able to close down the module and then return to it at a later time. Considering the module will not be run via an LMS Is it possible for the module to remember not only the last slide that the user viewed but also any interactions that the user has conducted. For example: saved information in variables, image states (whether or not they have been clicked etc), widgets (I am hoping to use the drag and drop widget so I want the course to be able to remember what items they have dragged where).
    Is this possible? I know there is a bookmark widget that uses cookies to remember the last slide the user viewed. I am also aware of another widget that allows you to save variables for use between projects, but in this case I will only have one project file. Is there something out there that does everything I need?
    Does the 'self paced learning' checkbox in the TOC save user interactions?
    Thanks! 

    Thanks Lilybiri. So it sounds like there is no easy way to save  interactions when run locally. Would using javascript (thats run when a user clicks a save button for example) be possible? Get the script to save a cookie with all the variables and 'states'? I know that saving the variables is possible because there is already a widget that does that, so wondering if there is a way to save the slide states as well (for example whether or not images have been clicked etc).
    Alternatively, if I create the project in captivate, is it possible to import into flash with all the functionality and actionscript intact and editable? From there I could then modify it to remember the saved states? (i am not proficient with actionscript  so just thinking of potential solutions).

  • Is it possible for another app to open a Viewer app?

    Is it possible for another app to 'link' to a Viewer app, thus having a button that opens the viewer app? A little bit like the Music app can open the itunes store app on the iPad. On iOS? On Android?
    Thanks in advance,
    Axel

    Hello Klaasjan,
    The reason I asked is because of the following text in the DPS Help file (http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60c5dd08612e5ea7d27f-7ff f.html#WS9293e1fb3b977c5c4ecf75d71329315057c-8000):
    URL Scheme
    Specify the custom URL scheme that launches the Viewer app from Safari and other apps. This option is available only if you specify a subscription or entitlement option. To ensure uniqueness, Apple recommends that you use the reverse-DNS format (com.publisher.publication). For example, suppose you specify “com.sportspub.kayaking” as the URL scheme. If you embed a “com.sportspub.kayaking://” link on your webpage, clicking the link from the mobile browser opens the viewer app. For more information, see Apple’s developer website.
    That text seem to indicate that this only works if it's an (multi-issue) viewer with itunes subscription or entitlement. But if you are sure that it will work with any kind of viewer (even single-issue) I'm happy.
    But I guess this only work on iOS? The DPS help file doesn't mention this functionality for building Android viewers.
    Kind regards,
    Axel Henriksson

  • Is it even possible to dynamically apply view criteria in an ADF Web App?

    This is one of those situations where something that should take an hour ends up taking days.
    * I have a view.
    * The view has Bind Variables associated with it.
    * The view has View Criteria associated with it.
    * Each of the View Criteria use different Bind Variables.
    * I have a search criteria input page that receives from the user what will ultimately be used to set the bind variables.
    * I have a search results page that uses the view to display a table.
    * I have the code that dynamically sets view criteria and parameters. It is based on the following:
    http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcadvvo.htm#BCGFHAGA
    * This code works great, until the iterator associated with the table binding to the view is initialized. At that time, the view is reset to its defaults, and all of my code's doings are discarded. How do I know this? Because I have gone so far as to run my code that sets view criteria and binding variables dynamically in a phase event handler for the search results page in the render response phase. There is no other point at which to dynamically modify the view.
    This is turning into a situation where it seems I will need 5 different views and 5 different pages in order to show a single set of query results. I cannot get dynamically applied view criteria to work in an ADF web app. Has anyone else done it? Can anyone relate to this? Are there any other suggestions before I conclude that it's not possible for this framework to handle this simple scenario?
    Thanks

    There must be a setting or something that I am still missing here. If I write code just like this and make sure it is executed, I still only see the results of my view executed without the view criteria applied using the default bind variable values that I supplied in the view object.
    It's like the fact that I set the bind variables, the view criteria, and executed the view query programmatically is lost on the iterator -- it's like it never happened. What setting is used to ensure that the iterator uses the outcome of what I executed programmatically? There has to be a critical set or setting that I am missing.
    Here is the iterator and search region definitions defined in the page def "executables" section:
      <executables>
         <iterator Binds="CustomSearchView1" RangeSize="25"
                  DataControl="AppModuleDataControl"
                  id="CustomSearchView1Iterator"/>
        <searchRegion Binds="CustomSearchView1Iterator"
                      Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
                      id="CustomSearchView1Query"/>
        </executables>Here's the "tree" binding in the page def file:
      <bindings>
       <tree IterBinding="CustomSearchView1Iterator" id="CustomSearchView1">
          <nodeDefinition DefName="Model.CustomSearchView" Name="CustomSearchView10">
            <AttrNames>
              <Item Value="CustomId"/>
              <Item Value="CustomProjectNumber"/>
              <Item Value="CustomName"/>
              <Item Value="CustomStatus"/>
              <Item Value="CustomStatusDate"/>
            </AttrNames>
          </nodeDefinition>
        </tree>
      </bindings>In an effort to take page flow out of this mess, I had modified this to include the search criteria and search results on a single page. So, I now have a "Search" button. When the "Search" button is clicked, the action method does the following:
        public String searchActionListener ()
              // Get search criteria from select one choice and text input controls.
              AppModule appModule =
                    ( AppModule ) Configuration.createRootApplicationModule (
                        "Model.AppModule",
                        "AppModuleLocal");
              appModule.customSearch( searchCriteria1,
                                                   searchCriteria2,
                                                   searchCriteria3 );
        }In my application module this translates to:
        public void customNoticeSearch ( String searchCriteria1, String searchCriteria2, String searchCriteria3)
           CustomSearchViewImpl searchViewImp =
               ( CustomSearchViewImpl ) this.getCustomSearchView1 ();
           searchViewImp.customExecuteQuery ( searchCriteria1, searchCriteria2, searchCriteria3);
        }Finally, in my custom view object implementation code:
        public void customExecuteQuery ( String searchCriteria1, String searchCriteria2, String searchCriteria3 )
            // Set-up the parameters that are part of the core query.
            this.setp_searchCriteria1( searchCriteria1);
            this.setp_searchCriteria2( searchCriteria2);
            if ( searchCriteria3 != null )
                ViewCriteriaManager vcm = this.getViewCriteriaManager();
                ViewCriteria vc = vcm.getViewCriteria ( "WithLastCriteria" );
                this.setp_searchCriteria3( new Number ( searchCriteria3 ) );
                this.applyViewCriteria( vc );
            System.out.println ("This is fun.");
            this.executeQuery();
        }This code executes, but the results table is empty, and I know that there are results, because I can execute use execute with params to execute the base query and get the correct results back.
    Thanks for taking a look at this.

  • Is it possible the query in view object is dynamic?

    Is it possible the query in view object is dynamic?
    Generally, make the column list dynamic.
    I think this is related to whether view object can be assembled at runtime based on a dynamic cursor in a procedure?
    I ask this because I would like to know how we can use OA framework to simulate crosstab workbook in Discoverer?
    Anybody has some clues, please advise.
    Thanks.

    Hi Shay,
    Let me tell you briefly... I am sending input as customerId,customerNumber,CustomerName to the web service, if the record is available i am getting the response and i am displaying those records on page as a table. Now when i click a row i need to populate another table with all sale orders of that customer. From webservice datacontrol i have only customer object, I dont have Sales Order Object. For this i need master detail relation. In this case how to proceed. Thats why i am thinking to create a vO and EO object for sales orders table and i want to create view link for this sales order and customers. As i don't have customer VO and EO object to create view link.

  • Is it possible for widgets in dashboard to float over other windows?

    I'm trying to assess features in Mavericks in comparison to Snow Leopard (the OS I'm most familiar with).  I usually read the Missing Manual for the new OSes, but haven't gotten to all areas yet - it's a big book!
    Is it possible for widgets in dashboard to float over other windows? 
    I want to be able to see the calculator widget for example while I'm also working in a Bills template document in Word, or over my back account page while viewing in Safari.  Or look at words in Thesaurus while viewing a document I'm writing in Word, or even an email in Mail.  In OS 10.6 widgets on the dashboard float above the other windows, but I can see them both at the same time.  It looks like Dashboard is all by itself in Mavericks.  Is this the case and the only way to view widgets now, is by themselves in their own isolated environment?  Any work around?
    Thanks.

    You can assign a "hot corner" with System preferences > Mission Control > Hot corners to bring up your dashboard anytime you want quickly by moving the mouse to the corner.  Works really well.

  • ICal for iPhone. View all events as a list without having to type into the earth box.

    iCal for iPhone. View all events as a list without having to type into the earth box.
    On the previous software version I used to be able to view all my calendar events as a list by clicking on the magnifying glass. Now you have to type into the search dialog box for a list to populate. This is very frustrating and annoying because I much prefer the list format to populate everything unless I specify what I am looking for into the search box. Is there a way to view all the events as a list without having to type anything into the search box?

    And you are aware of the possible options for listing the months and having an optional export value for each month.
    For listing the months, you can use a number, a 3 character string, or the full name.
    For the export value, the full name, the 3 character value, the 1-2 number, or the 0-11 JavaScript value.
    I would look at deciding how you want to populate the drop down box and build a one page form with just this field. You can then insert that page into a PDF and copy the field as needed and then delete the inserted page. Or you could create an FDF file to create the drop down box.

  • Is it possible to create relational view on Analytic Workspace in Oracle 9i Release1

    Hi All,
    We are in the initial stages of Oracle 9i OLAP prototype. Since the current version of BIBeans 2.5 does not work with Release 2 of Oracle 9i OLAP, we are planning to use Oracle 9i OLAP Release 1. So can you please answer the following questions.
    1. Is it possible to create relational view on Analytic Workspace(like in Release 2) and populate the OLAP catalog, if so can you give me guidance to get the appropriate user guide. The OLAP DML guide in Release 1 talks about creating OLAP catalog metadata for Analytic Workspace using a metadata locator object.
    2, Is it advisable to use Oralce 9i OLAP Release 1? Does the Analytic Workspace and the corresponding BIBeans work in Release 1?
    Thank you,
    Senthil

    Analytic Workspaces (Express/multidimensional data objects and procedures written in
    the OLAP DML) are new to Oracle9i OLAP Release 2, you cannot find them in Release 1.
    BI Beans will soon (within a week) introduce a version on OTN that will work with Oracle9i OLAP Release 2.

  • Is it possible to modify a view at run time?

    Hi,
    I am relatively new to using SQL Server, so sorry if this is impossible or very easy and I missed the solution.
    I am working on an enterprise SQL Server 2008 R2.  Because of the size of the company, we do not want to create new Views as they need to be maintained.  With that said, I need to use Views and not tables because of DB traffic issues.
    HERE IS MY QUESTION:
    Is it possible to Alter a view at run time; in this specific instance I want to change a constraint in the WHERE clause to include one more value in an IN() constraint.  Specifically I want the modified SQL to go from WHERE column IN('A', 'B', 'C')
    to 
    WHERE column IN('A', 'B', 'C', 'L').  I do not want to permanently modify the View, I just want the View to change when it is run for this report.  I need to do this in order to fix a dynamic report.  I am sure that there is another way to
    accomplish this; however, a solution of this manner would also have many other uses, so I am curious if this is possible. 
    Feel free to tell me that it can be done. 
    Thanks for your ideas!!

    Right, I understand those fundamentals.  We outsource a lot of out view creation and do not have permission to create views for Business reasons; these are beyond my control.  However, I can see the source code to many Views.  We have also
    been told that we should not use tables in our queries.  Therefore, I need to use existing Views.  Specifically, I would like to add an additional value to an IN() constraint.  This would change the constraint as showed below: 
    IN('A', 'B', 'C') ---> IN('A',
    'B', 'C', 'L')
    I am wondering if this change can be made when the view runs and only for this one report, with the change being made from the report.  This would be very easy if the constraint was removing a value.  Obviously I could change the constraint from
    IN('A', 'B', 'C') to IN('A','B') very easily with out modifying the View. This would be done by writing a query against the view and in the WHERE clause adding the new IN('A', 'B') statement.  However, I want to do the opposite and add a value...

  • Is it possible to maintain a view vai Batch Input

    Hi guys,
    The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
    Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
    Brian Liu

    Additional information:
    This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
    I find a SAP note 208474, it says:
    Symptom
    Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
    The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
    Cause and prerequisites
    Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
    not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
    The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
    Solution
    The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
    In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
    Note that the attached modifications are not and will not be included in the R/3 standard system.
    I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
    Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
    Brian Liu

  • Is it possible to create a view where table in the From clause changes name

    is it possible to create a view from a from a table like this
    create view my_view as select id, col1, col2, result from <<my_latest_cacahe_table>>;
    the table in the from clause changes the name .
    I have another table which indicates the the latest name of my cache tables. Always there are two records there. The latest one and previous one.
    select * from cache_table_def
    table_name cache_table_name refresh_date
    my_table cache_table245 1/23/2012
    my_table cache_table235 1/22/2012
    create table cache_table_def (table_name varchar2(25), cache_table_name varchar2(25), refresh_date date);
    insert into cache_table_def values( 'my_table','cache_table245','23-jan-2012');
    insert into cache_table_def values ( 'my_table','cache_table546','22-jan-2012');
    create table cache_table245 (id number, col1 varchar2(50), col2 varchar2(20), result number);
    insert into cache_table245 values(1, 'test123', 'test345',12.12);
    insert into cache_table245 values (2, 'test223', 'test245',112.12);
    create table cache_table235 (id number, col1 varchar2(50), col2 varchar2(20), result number);
    insert into cache_table235 values (1, 'test123', 'test345',92.12);
    insert into cache_table235 values (2, 'test223', 'test245',222.12);
    what I need to do is find the latest cache_table name for my_table and use that in my view defintion
    When user select from the the view it always reurns the data from the latest cache_table
    is it possible to do something like this in oracle 11g?
    I have no control on the cache tables names. that is why I need to use the latest name from the table.
    Any ideas really appreciated.

    I've worked up an example that does what you ask. It uses the SCOTT schema EMP table. Make two copies of the EMP table, EMP1 and EMP2. I deleted dept 20 from emp1 and deleted dept 30 from emp2 so I could see that the result set really came from a different table.
    -- create a context to hold an environment variable - this will be the table name we want the view to query from
    create or replace context VIEW_CTX using SET_VIEW_FLAG;
    -- create the procedure specified for the context
    - we will pass in the name of the table to query from
    create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
      as
      begin
          dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
      end;
    -- these are the three queries - one for each table - none of them will return data until you set the context variable.
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    -- this is how you set the context variable depending on the table you want the view to query
    exec set_view_flag( p_table_name => 'EMP' );
    exec set_view_flag( p_table_name => 'EMP1' );
    exec set_view_flag( p_table_name => 'EMP2');
    -- this will show you the current value of the context variable
    SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
    -- this is the view definition - it does a UNION ALL of the three queries but only one will actually return data
    CREATE VIEW THREE_TABLE_EMP_VIEW AS
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    -- first time - no data since context variable hasn't been set yet
    SELECT * FROM THREE_TABLE_EMP_VIEW
    -- get data from the EMP table
    exec set_view_flag( p_table_name => 'EMP' );
    SELECT * FROM THREE_TABLE_EMP_VIEW
    -- get data from the EMP2 table
    exec set_view_flag( p_table_name => 'EMP2');
    SELECT * FROM THREE_TABLE_EMP_VIEW
    For your use case you just have to call the context procedure whenever you want to switch tables. You can union all as many queries as you want and can even put WHERE clause conditions based on other filtering criteria if you want. I have used this approach with report views so that one view can be used to roll up report data different ways or for different regions, report periods (weekly, quarterly, etc). I usually use this in a stored procedure that returns a REF CURSOR to the client. The client requests a weekly report and provides a date, the procedure calculates the START/END date based on the one date provided and sets context variables that the view uses in the WHERE clause for filtering.
    For reporting it works great!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • No goods receipt possible for purchase order message number# M7036

    Hello,
    We are working in 4.7C , Created the scheduling agreements, with Shipping notification(Inbound delivery)   .
    Created the Scheduling agreement on 25.09.2009 and created the schedule line one same day with date 25.09.2009, (time column Blank).
    So in Practice for Goods receipt we are using MB0A t code for GR,(not using MIGO)..while MB0A..iam going to make GR with ref to Shipping notification then system will through below given message.
    No goods receipt possible for purchase order
    5500001447 0001
    Message no. M7036
    tried every thing but unable get. shar your views
    Regards
    Sapman man

    Hi
    If you use Shipping notification then you have to create inbound delivery VL31n and do the PGR in inbound delivery  VL32N itself.
    Incase of scheduling agreement schedule lines you have to make sure the following
    1) Schedule line delivery date shoud be todays date or in the past
    2) Schedule must be released by using message type based on the type of schedule ( Normal, JIT or forecast)
    Hope it helps
    Thanks/Karthik

  • Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two.

    Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two
    Modifying the header
    Changing page background color
    Changing sidebars in CSS
    Adding/changing a Spry link's background and hover colors in navbar
    Formatting headers in split view
    Deleting placeholder copy in the content container
    Inserting a video in a table
    Changing table background color
    Formatting text in the content container
    Format hyperlinks in CSS
    Insert page anchors and link to them with navbar hyperlinks
    Enter text in footer with a hyperlink
    Insert and format headers
      Use of a color picker (Color Cop)

    Use CS6 Help (F1).  Those are the most up to date articles for your product version.
    <Changing page background color>
    We've already told you how to do that with CSS code.
    <Deleting placeholder copy in the content container>
    Placeholders are deprecated.  Adobe removed them.
    <Inserting a video in a table>
    Insert > Media > HTML5 Video
    <Insert page anchors and link to them with navbar hyperlinks>
    Named anchors are deprecated in HTML.  Adobe removed them from DW.  Use Div IDs instead.
    Why are you taking a course that teaches outdated methods in CS4 which is no longer supported?
    Nancy O.

Maybe you are looking for