Is it possible for Nexus7000 flexible netflow monitor for interfaces with different vrf and export to one netflow analyzer?

I have a Nexus 7000 with many vlan interfaces with multiple vrf, I would like to know if my netflow analyzer only connected to one vrf, can I use flexible netflow on the Nexus 7000 to monitor those vlan interfaces with multiple vrf and export them to my netflow analyzer, so that I can see all flow from different vrfs on my netflow analyzer?
Thank you!

Adriano, there is a RV042G, which supports the gig ports and a 800 mbps nat throughput. Here is the datasheet
http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps12262/data_sheet_c78-706724.html
If you are using a DSL connection, the SRP527/547 models may be an alternative. These models support the RFC 1483 Bridges EOA Please note the SRP547 should be 10/100/1000. Also note the SRP521/541 are Fast Ethernet units and they do differ from the SRP527/547. The main selling point of these devices are the FXS/FXO ports. So this may also be a bit of an "unfocused" solution. But it's worth throwing the idea out there!
Here is the admin guide;
http://www.cisco.com/en/US/docs/voice_ip_comm/unified_communications/srp540_series/administration/srp500_AG_2567701.pdf
Here is the datasheet;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps10500/data_sheet_c78-550705.pdf

Similar Messages

Is it possible for sms text messages to be forwarded from one iPhone to another

Hi I'm looking for a bit of help please? Is it possible for sms text messages to be forwarded from one iPhone to another without the use of such app as mysms or google voice as neither of these seem to work. Apple sugested that my network provider can usually assist in such maters with a few simple setting there end. Does anyone have previous experience in these matters. Thanks Matt.

Do you mean forward them automatically?
As you can manually forward any SMS or iMessage to any number you want directly from the iOS Messages app.

Partitioning an External 320gb drive for use with Time Machine and...

I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-

Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

Search for Duplicates with different titles

Some of us ill organized users have thousands and even tens of thousands of pictures scanned in from old albums, 35mm slides, and shoe boxes full of loose pictures. The result is many duplicates with different names. In Elements one could search on 'similar photos' or some such nomenclature and it did fairly good. How is it possible that an organizer in Photoshop Elements can have a superior tagging and search system to that in lightroom. I realize Lightroom does a lot more, but you have come so close to the good things in Elements why not include them in version 1.2?
I asked about this in the forum and got some good answers, but basically told if I want to search on photo based color data, I need to use a program other than Adobe. Hope Adobe fixes that, it would be a great service to lots of us dis- or ill- organized people.
I love Lightroom, but sure hope for some real improvements. Talk to your buddies in Elements.
Jack

here is one way to find all matches first and then you can add a fine search/separation if there is more than one match
depending on the size of the sorted array it might be faster if you search for the first match and than look if the next still matches ...
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
find all matches.vi ‏11 KB

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with a Anritsu make(model-MS710) Rf spectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire from the instrument and save the data in PC.the data

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with an Anritsu make(model-MS710) RFspectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire data from the instrument and save it in PC for printing purpose.

Hello,
Unfortunately I was unable to find a driver for this instrument. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
http://www.ni.com/devzone/idnet/other.htm
We develop drivers in CVI and LabVIEW based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one. While this would not provide you with a QBASIC program, you may be able to create a DLL that you could call from QBASIC.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndica
te of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
Good Luck,
Kim L.
Applications Engineer
National Instruments

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck.

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Which iMac for use with Photoshop CS5 and Lightroom

Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help

So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
So much so that I was able to buy a brand New ASUS with the following specs:
Dual Core 2.2GHz Processors
8GB of RAM (4GB original to the machine)
Windows 7 Home Premium 64Bit OS
320GB HDD w/ 5400RPM
This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop

Look for files with different names

Do we have any utility or command in solaris 8 where we can check for files in two folders with different names and display them somewhere? Manual search for such files becomes very difficult when there are a large number of files in the folders. Please suggest.

Check with an Unix forum like http://www.unix.com

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Must I define abstract interfaces with different names for BPM?

Must I define abstract interfaces with different names for BPM?
When interface appeared several times with different values and usage.
Of course they are the same message type.

Hi,
Check this
RFC Scenario using BPM --Starter Kit
Regards
Seshagiri

Free webinar: Creative Cloud for Photography with Ps CC and Lr5

Creative Cloud for Photography with Photoshop CC and Lightroom 5
Friday, June 21, 2013 | 12:00 PM PT
Presented by: Julieanne Kost
http://www.adobe.com/cfusion/event/index.cfm?event=detail&id=2008488&loc=en_us
Join Julieanne Kost, Principal Digital Imaging Evangelist, as she demonstrates new features in Photoshop CC and Lightroom 5, as well as sharing and collaboration features of Adobe Creative Cloud. In this Ask A Pro session, you will:
Learn how Creative Cloud brings additional capabilities to your workflow with Sync Settings, Sync Fonts, and sharing with Creative Cloud
See new features in Photoshop CC to enable more advanced sharpening than ever before with all-new Smart Sharpen, intelligent upsampling, and Camera Shake Reduction.
Learn how to perfect your images using the new Upright and Advanced Healing Brush in Adobe Camera Raw 8 and Lightroom 5
See how to customize your photo books in the updated Book module in Lightroom 5
Share your images with the leading online platform to showcase and discover creative work using Share to Behance from within Photoshop CC

http://blogs.adobe.com/jkost/2013/06/creative-cloud-for-photographers-with-photoshop-cc-an d-lightroom-5.html

It's possible reads in a same e-reader, books with different Adobe ID

it's possible reads in a same e-reader, books with different Adobe ID

i think is possible but ONLY in the same jar.
If i try to use different jar i get only the instance of class that the classloader load.....
any suggestion?

Is it possible for Nexus7000 flexible netflow monitor for interfaces with different vrf and export to one netflow analyzer?

Similar Messages

Maybe you are looking for