Is it possible / needed to make a system save on an external HDD. In Windows German it is named "Systemabbild"

Is it possible / needed to make a system save on an external HDD?
In Windows German it is named "Systemabbild"
I am a new MacBook user and I am not sure, if the software from internet can damage my system, as like in Windows. Therefore it will be helpful for me, to get the info, how to make a system safe or a recovery disc, when possible.
Thanks for help

I recommend SuperDuper to make a complete 1:1 clone bootable backup of your hard disk to an external drive.

Similar Messages

Is it possible to make OSX see the internal and external HDD's as one large drive?

Is it possible to make OSX see the internal and external HDD's as one large drive? For instance, hypothetically, could I have a Mac Mini Server with 2TB of internal storage and 2 external 4TB Thunderbolt HDD's, and make the OS see them all as one large 10TB drive?

Yes it is possible to do this, but this is not recommended since a disconnection of the external drives would lead to a destabilized system. Its best to do this only with internal drives, or secondarily with only external drives that are set up separately from the boot drive.
However, if you do wish to do this then you can combine any local set of volumes into one large "spanned" hard drive using Apple's CoreStorage volume management service. It does take a few steps to set up and requires use of the Terminal and Disk Utility. Here is a tutorial on how to do this: http://reviews.cnet.com/8301-13727_7-57550128-263/how-to-make-a-custom-corestora ge-drive-in-os-x/

Need help with pictures on an external HDD and windows labtop to Ipad3

Hallo everybody!
This week (I finally) bought an Ipad 3 and an Apple TV!
For the time being I still have a windows labtop and an external HDD full with photo's.
The ICloud software for windows has been installed because I would like to stream the pictures from this external HDD to my Ipad and then ofcourse on my flatscreen TV (via Apple TV). And ofcourse back, when I have taken a photo or a movie on the Ipad 3.
I would appreciate some help with the following questions:
do I have add all pictures from the HDD into a new map on the windows labtop. So that via Icloud the contain could become 'in the cloud'.
or do I have to add all the pictures from the HDD into the Itunes map on the windows labtop.
I have connected the Ipad to the windows labtop and via Itunes I have synchroniced a lot of pictures to the Ipad. I asume these are copies? And is it possible to remove them from the Ipad, because it will take a lot of memory (currently already 35 GB from the 64 GB).
Well I hope somebody could help me.
Many thanks in advance!
Ronald from the Netherland

I just found out that ICloud isen't really a storage place for photo's. Just a passing throw station to your other devices.

Need BIOS Update Lenovo V580c [for correct work with HDD PUIS] Windows 10 x64 TP

Hello, Im update my bios notebook V580c from official page this model, latest release from official site. But when i try update my notebook - i got message, your bios update file older than your original firmware? but im ignore it and force update. When i install Windows 10 x64 TP - i got some problems with HDD freezing, intel rst AHCI controller driver installing get only BSOD, lot of a versions i try. Need bios update. Thanks.

Im understand that, but i still have a problems with Windows 8.1 x64, after Win10. When i try update AHCI controller driver - i got BSOD. no one version get good update, only oldest 2006 year standart universal driver HACI from Microsoft still work, but HDD continue freezing. Some Power flags on my HDD after Win10 get u some strange settings, and BIOS V580c too old - to correct work with it.
What i must do to fix it? (sorry for bad english, im russian)

Need logical setup advice for new iTunes on external HDD and new laptop

New to Win7, would like to know the best way to re-create from scratch my 5+ year old iTunes library on a new external hard drive without simply copying the previous iTunes folder structure over. I guess that I would like to add all the music, video, movie and iPhone app files to a new library. What is the best method to do this so that iTunes can organize all of the new data from scratch correctly? What about reauthorizing apps and media I purchased through iTunes? anything special to do to reintroduce this data to a new iTunes?
(to clarify - I intend to install the iTunes program on my local C drive in programs on the laptop and all data on the external drive) Thanks...

Steve M. wrote:
I know I should have redundant backups and should probably have a second external HD and eventually will.
Yes, that's best.
But for now, if I partition (I'm assuming I should) a new 1 TB external HD, how big should I make the TM partition vs. the SD partition at this point assuming I have under 100 GB on my internal Mac HD? Is this a feasible way of doing things here in the near term.
Your best bet is to make your TM partition 2-3 times the size of the amount of data you anticipate backing-up. Put it first on the drive; that way, later on you can delete the partition below it, expand the TM partition, and make a new, smaller partition for SD (or use the whole drive). See #1, #3, #5 and #6 in the Frequently Asked Questions *User Tip,* also at the top of this forum, for details.
By the way, any recommendations on which peripheral HDs to consider? I was very surprised on a recent visit to my local Apple Store that they have a large stock of WD My Studio drives. I mentioned to an Apple sales person that I had always heard WDs were kind of a no-no among Mac users but she assured me the current crop of them were much improved. Any comment on that??
Most any drive will work with Macs, and Time Machine.
If you're going to put a "bootable clone" on it, be sure it's a bootable drive. Most PPC Macs can boot only from FireWire; most Intels can boot from F/W or USB. But some Western Digitals won't boot a Mac. Their list of which ones should and +should not+ boot: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787. But note the disclaimer that they don't support it +*at all.+*.
In addition, many of them have a built-in sleep mode that cannot be disabled, and sometimes interferes with Time Machine backups: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1376

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hier kun je er meer over lezen; http://www.wikihow.com/Use-the-Cameras-on-Your-iPad-2
En hier kun je meer informatie vinden over de iPad; www.iPadforum.tk

I have a hitachi hard drive from an old pc. I would like to transfer pics and music to my macbook air. What cord do I need to make this possible?

I have a hitachi hard drive from an old pc. I would like to transfer pics and music to my new macbook air. What cord do I need to make this possible?

Some external cases include cords others (like some printers) consider the cord to be "optional" - read the package or product description. Other World Computing, HH Greg, OfficeMax, any box store or local computer store should have a case for your old drive.
You are fortunate in that the Mac will automagically read the DOS format disk... you'd never be able to connect and old Mac HD to a WinDUHows machine.

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

I downloaded the new 9.? version told my PC to run it. It said to restart my system to take effect. I did. Every time I try to get on line it gives me the message that I need to restart my system. What should I do?

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state

I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state.
e.g. I've got a WI with a field on it that tells me how many active bugs are linked to it. (I'm not actually counting active bugs, but hopefully you get the idea).
The only way I can think to do this is with a TFS plugin and catching the workitemchanged event. I'd prefer to do this entirely in the WI if possible? is there a way to do this? Thanks

Hi TimB33,
Thanks for your post.
As far as I know there’s no default WI rule support to get the specific WIT linked count, I think you need to create your custom work item control to achieve that if you want this field.
For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What do I need to do when I receive the message ". . . your startup disc is full, you need to make some room by deleting some files"

I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
Memalyn

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...

Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.

I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift.

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.

Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HT1267 I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my Ne

Hi there,
I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
Please let me know how I can get this sorted as soon as possible!! Thank you very much

You can create an Apple ID without a credit card, see this article:
Create an iTunes App Store account without a credit card
Check this post about iPhones from Iran:
Re: Why Apple does not support from Iran? And why not open a store in Iran?

I need to make a task with less as3 code and more timeline structure and event dispatcher !

I went to an interview in a big company. I had to make a task in which there is a wall with 3 lines and 5 columns filled with bombs.When you click on a bomb the bomb changes its scale, a robot enters, goes under the bomb and takes it, then goes to a smaller wall, makes the bomb smaller and place it at the same place it had been in the previous wall.I made the task with tween througout as3 code.The interviewer told me it was good but i need to make it with the less code possible and with more complex timeline structure and to use event dispatcher.What is the best way to do this ?

The immediate thing that comes to mind is they might want to see that you can balance work between design teams and development teams.
To do that, the robots movements (pick up bomb, bomb grows/shrinks, arms/treads/legs moving, sequences of 'doing things') can be timeline based so animators can work on those separate from code.
Developers would be working on the logic of keeping score, moving the robot around to the correct spot with path detection, collision detection, etc.
It's very similar to thinking in simple factories (which Flash is good at being automatically with timelines), and a bit of MVC (or just VC in some cases).
Big companies have lots of different types of employees so you'll probably be very specific in your role so you're efficient.

Is it possible / needed to make a system save on an external HDD. In Windows German it is named "Systemabbild"

Similar Messages

Maybe you are looking for