Is it possible on iMovie 11, to change the frame length of a still to something less then 0.1s?

I have about 3008 different still photos that are frames of a slideshow introduction I made. When editing the frame length, the fastest I can make it is 0.1s and that does not look smooth enough. I am very new at this and am not even sure what speed i should have the frames moving so that it looks smooth, and is it even possible for the speed to be faster then 0.1s? Any support would be greatly appreciated, thanks.

They can enable it by going to Edit - Preferences - Forms and clicking the "Show border hover color for fields" box.

Similar Messages

How do you change the frame rate (or fmp) of a project once you have already started?

I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
thanks

Hi,
I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

Is it possible to change the frame rate of a motion template?

Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
If not in Motion, how else could this been changed?

Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
If you have any problem with the activation contact Adobe support using chat... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

BRFPlus - Possible for business users to change the rules ?

Hi,
1) Is it possible for business users to change the rules in decision table, tree, formula etc?
2) If yes, what are the steps to achieve it?
Thanks.
- julius

Hi Julius,
do you know the BRFplus knowledge center:
Business Rule Framework plus [original link is broken]
There is a video called Bonus Determination that shows the steps for a developer and a business user.
The developer may create the function, data objects and maybe the initial decision table. The business user then can create the lines in a decision table.
In the 701 version this should work fine. The 701 trail version is a pre-release CD which contains some bugs that should be gone in the latest SP of 701.
BR,
Carsten

Programmatic to change the Frame title

Hi all
It's not possible programmatic to change the Frame title. Is there any way (not-documented) to change it?

If I am understanding your question, you could do this:
Set_Window_Property('WINDOW NAME', TITLE, 'ANY TITLE');
I have used this on the When-New-Form-Instance trigger.
Edit: Sorry I miss-read your question. My solution is for the window's title not the frame.
Sure wish there was a way to delete my incorrect post.
Edited by: Darksky on Mar 18, 2010 10:53 AM

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

How do I change the ITunes Library to a new computor, which will then synch with my Iphone. Thanks.

How do I change The Itunes library to a new comutor which will then synch with my Iphone? Thanks.

Copy everything ( itunes, pics, contacts,calendars, files docs,etc) from your old computer, or your backup copy of your old computer, to your new one.

How can I change the frame around a title created with the Rectangle Tool?

In PrE 7, I have been creating titles (e.g.: Title > New Title > Default Still, etc.) for a long time and using the many ways to manipulate the text (type, color, size, animation, etc.). Today, I tried to use the Rectangle Tool (or the Ellipse Tool, or the Line Tool) and they created a beautiful 'frame' (like a picture frame: artistically designed and colored) and I can change the background color within the frame and place any text (also background picture, etc.) in it. However, I couldn't find any way to change the 'frame' or the general style of these title objects. Is there any way to do this, or this is the only design that can be created with these tools? I would greatly appreciate any help (couldn't find any in this u2u site). Thanks, Laci.

Laci,
Yes, you can apply Styles to several Rectangles (or other Shapes), to simulate a "frame." The Styles should appear as Text in the Styles Panel. Since you are working with Shapes, but viewing the Styles applied to Text, it is not perfectly intuitive as to what those Styles look like with the Shapes.
Personally, I find that doing things like "frames" in Photoshop and then Importing the PSD's into PrE is far, far easier. In that case, I would place the PSD on Video Track 1 (unless I wanted it to appear superimposed over my Video (like a PiP), and then do the text in a PrE Title, and place it above the PSD.
Here is an example:
This is a simple "picture frame" created in PS. I used a still image, instead of text in this case. These could be "wood-grained," "granite," etc.
Much more control and tons of Effects and Filters that can be applied.
Good luck,
Hunt
PS - that is from PrPro, so the GUI will look quite different, but things work the same way.

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

We have adobe acrobat pro installed on our computer - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

We have adobe acrobat pro installed on our computer - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

What is your operating system?
To install/update Adobe Reader or Acrobat you need to supply your computer's Administrator password.

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Why can't I change the frame label type?

In a movie clip, I have several frame labels applied. The type of label is set to Name, which is the default. I want to change some of them to Anchor (to use as named anchors with fscommand), but the Type drop-down list is grayed out. Anyone know why? I can't find any info on named anchors, not even in the Help. Yes I know that anchors don't work everywhere, but this is for a specific client.

Well, that's strange.
In all the named frames of Video MC, I wanted to change the frame label type from Name to Anchor. The drop-down list was grayed-out, and clicking it didn't do anything. That is.......until I exited Flash and restarted it. Now, I can click the drop down list and select anything I want. I suppose I should have thought of that earlier.
Thanks, and I hope I didn't take too much of your time!

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Is it possible on iMovie 11, to change the frame length of a still to something less then 0.1s?

Similar Messages

Maybe you are looking for