Is it possible?!?! PC to N8 Internet

Hi there,
Firstly I am not trying to use my cell phone as a modem and provide internet to my laptop.
I AM trying to provide internet to my N8 via my laptop which is connected to a wired network.
Is this possible ??

If you have windows 7 and a recent enough wifi card, you can share your internet connection and make your computer a wifi hotspot. This has been a bit tricky to use for me, however but it is possible. Check this link http://www.blogsdna.com/5506/how-to-setup-virtual-wifi-in-windows-7-without-any-extra-software.htm out.

Similar Messages

  • Is it possible to switch my internet? Please help

    Right now I am using iCab Web Browser and its a shareware. It's very slow, and can't access some websites. I have OSX 9. Is it possible to switch to Internet Explorer or Windows? I really would like to switch and I am not a computer person whatsoever. Please help me.

    There are other older choices from which to experiment, such as Classilla 9.2.1 browser,
    which is newer than the much older WaMcom mozilla derivative...
    These would all have some issues, and one of them is the lack of correct Java support
    along with any Flash player or other important parts whose update has ceased to happen.
    Classilla:
    http://www.floodgap.com/software/classilla/releases/
    Older browsers, such as very early (Mac OS) Mozilla and Netscape 7 or before may be OK
    if you can find them as downloads; but each will be lacking in some important area. For those
    who may hope to use the email function in some, that may not work. It may in another, if the
    technical specs for email haven't changed too much, or if the Internet provider allows access.
    http://code.google.com/p/classilla/wiki/AAATheFAQ
    MRJ and Flash 7 are supported to some limited extent, from what I've read; but for issues
    including security and performance, it is 'forced-off' and should only be turned on to see if
    a web page supports it, or in known-secure web sites. Classillia should be read into further.
    Some models of older computer hardware predating OS X 10.2 may require a Firmware
    update version to be installed in the older OS9 software, running in the computer, to be
    able to safely consider running 10.2 or later, in the computer. So if you consider that, do
    look into available or necessary firmware updates and install one as needed. Then, to run
    an OS X, the computer may require other hardware updates, more RAM, larger HDD, etc.
    Or be on the look-out for a newer build Macintosh which supports later OS systems; you
    can find info in MacTracker.ca or everymac.com on what hardware supports which OS.
    PS: if your older 'colors' G3 iBook were a 'dual-USB' model (white, 500MHz+) it would be
    able to run up to Panther 10.3.9 and OS 9.2.2, without additional firmware update; limited
    by the size of the hard disk drive, graphic processor, limited RAM upgrade, bus speed, etc.
    Good luck & happy computing!

  • Is it possible that the neighborhood internet traffic is too big for the att lines to handle?

    We live in a large neighborhood where most of the houses do not have Uverse abilities.  Installation of the fiber wires have taken place with the newer houses and the front of the neighborhood, but the rest of us are very frustrated with very slow service that is constantly going down and not strong enough to be able to use on demand services.  I am currently paying for Xtreme6, but do not believe I am able to get what I've been paying for.  My internet usage is not shown on my account, so I'm not sure how much we are actually using.  With the speed test it reported that I have 2.77 Mbps download and 0.21 upload.  That was earlier today where as the internet slows down significantly in the evening hours when people are at home using the internet.  According to the lady I spoke with today on the phone that unfortunately was not very helpful the lowest DSL service is only $10 cheaper than what I am paying for the top service.  I'm just not sure what I need to do in order to only pay for what I'm getting.... Advice please  

    Are you using wireless? Have you tried a wired connection if possible?
    When you ran the speedtest, was that the only thing running on the network (no streaming, background downloads, etc.)?

  • Possible to share my internet connection os x lion to iphone 4s

    Trying to use bluetooth PAN to share my ethernet connection on my macbook pro running Lion
    TIA
    Kevin

    I'm sure it is possible, but that would be a question for a forum delaing with the operating system on your laptop which you neglected to mention.
    Assuming its Windows for instance this seems to be what you want:
    http://www.sevenforums.com/network-sharing/78515-share-internet-via-bluetooth.ht ml
    Basically The Sharing would be done first from the Laptop, and the connection to the iPad would just be bluetooth pairing which would be done through the Bluetooth settings in Settings.
    If its Mac possibly this would work for you
    http://kiskeyix.org/articles/552
    Again it will vary depending on the operating system on your Laptop.

  • Is it possible to make an "internet" chat program?

    I have already made a chat program for a LAN, but I want to somehow make it usable over the internet. Is there a way to make the program use your internet ip, instead of your lan ip?

    Hello: I gott a similar trouble over writing an internet chat app. I have an app that works on a local server, works with a local database, i want it to work on internet, but i dont know how to do it, i also use a server app for replying client queries. I'm using sockets and i don't know how a client can works throught a LAN - proxy or router internet acces - to the app if i have to place it on a web server

  • Is it possible to use the Internet User Alias?

    Hi,
    We are currently authenticating users against an LDAP datasource and pulling back the employee id as the SAP username in order to provide the correct authorisations. The problem with this is that we then have to create another user account for people who require R/3 access via the GUI.
    What we want to be able to do is to use the Internet user alias against their R/3 account so that we essentially only have 1 account to maintain for each user.
    Does anyone know how this can be achieved?
    Thanks in advance!
    Keith

    If you are using ABAP for your UME user store, the LDAP IDs are probably stored as aliases in the backend ABAP system. If that's the case, your users already have corresponding, automatically generated, backend R3 IDs. Trying searching by alias for one of your web users and see if there is a user master record for that user. They can log into SAPGUI using that auto-generated ID, although you may need to assign a password first. From the user perspective, it will still seem like they have two different accounts though, since the login ID will be something new for sapgui.
    http://help.sap.com/saphelp_nw70/helpdata/en/52/67119e439b11d1896f0000e8322d00/content.htm

  • Is it possible to turn off "Internet Connect / Authentication Failed" msgs

    Greetings and thank you for your time.
    My network connect is set up to automatically connect wirelessly or through Ethernet...this is fine.
    However, every time I open my notebook or start it up,
    If my computer cannot connect through those two, (airport is off/no cable attached) it constantly sends the pop-up message: "Internet Connect / Authentication Failed". 3 times over a period of 15min.
    Is there any way to turn this warning off ?
    I am not trying to access a connection & Mail/Safari are closed.
    It makes it frustrating when you arrive at a meeting to start a presentation and you keep getting this popup that blocks all functions till you acknowledge it and click "ok".
    Any suggestions other then turning off auto connect (which I appreciate when I do turn on Airport or plug in an ethernet cable.
    Thank you for any support on this.
    Best regards, T

    Greetings T, and Welcome to the Discussions!
    We just have to find what it is that's tying to connect/call home, and disable it.
    Common examples are Network Time... Set Date & Time Automatically.
    Software Update... Check for Updates...
    Dashboard Widgits & Rss Feeds.
    Automount Shares.
    Mail automatically checking for Mail.
    I( was thinking more when I started, but the Berr is...
    If all that fails, maybe get Little Snitch, it tells you when a program tries to send info to the internet so you can see what's going on in the background!
    http://www.obdev.at/products/littlesnitch/index.html

  • Possible virus or corrupt internet explorer? l505-es5018

    here is a list of things that just started and need to stop
    1. slow to start from stand by
    2. internet explorer wont close right just keeps popping up after the first one is closed
    3. last nite wouldnt shut down properly
    could i have a virus and norton just wont find it? or is it worse?

    Satellite L505-ES5018
    Are you talking about the 32- or 64-bit IE8?  In any case, I'd advise you to stick with the 32-bit one. Many add-ins are not yet available for the latter.
    Most problems get solved with a reset.
       How to reset Internet Explorer settings
    -Jerry

  • Is it possible to download Microsoft Internet Explorer to my MacBook Air?

    I have several different sites that I have to use for my job.  However, one of the sites is not supported by Mac, Safari or Firefox.  It is only supported by Internet Explorer.  Can I download Microsoft Internet Explorer to my MacBook Air?  And, if so, how do I do that?

    rkaufmann87 wrote:
    There is another much more simple option than what JasonFear is offering.
    First in Safari open Preferences - Advanced and click Show Develop Menu in Menu Bar. The click the Develop menu - User Agent - and choose the version of Internet Explorer you want. This will allow Safari to open IE developed websites.
    Great suggestion, rkaufman. I forgot all about that option. I'll be curious to see if that works for the OP my experiences with that "simulation mode" haven't been very successful.

  • Possible solution to slow internet speed

    I'm not promising anything here but this worked for me. I recomfigured my AEBS from scratch and didn't fool with anything else. now the weird part that made my base station work finally was placing the base station on its face (part with light facing down) my connection is great once again. I also placed the Airport farther away from the modem . I think the New AEBS can't handle & causes interference with other electronic devices(in my case the cable modem is next to it with my macbook.)
    overall, I think the EM field around the base station might be a cause of all the problems

    I had the same problem. I had WPA enabled and my internet was slow and would not go over 4000 kb on speed tests. With no security i got 16000 kb.
    There are quite a few bugs in the Airport Extreme. I have slow wireless with WPA and i cannot open any ports using NAT-PMP or port mapping.
    Very disappointing.
    Apple better release a update soon or i am goin to return it and buy the dlink dir-855 when it comes out. I want a dual-band wireless router.

  • Possible to disable all internet access on iPhone?

    I'd like to get rid of all browsing on my phone. I've disabled Safari and App Store using restrictions. The problem is that there are several downloaded apps I'd like to keep that have built-in browsing. Is there a way I can keep these apps but get rid of their browsing capability?
    Simply put, I don't want there to be any way to browse on my phone. How can this be done?
    Thanks!

    And switch Settings > General > Cellular > Cellular Data : OFF

  • Is a Internet Plan Possible?

    Hi...
    I’m thinking about getting the “touch” and I’m not clear if it’s possible to get an internet service for the “touch” specifically or is it only capable of using hot spots and wireless routers...
    Comments, suggestions and opinions are appreciated....

    As already stated, you can only access the Internet when you can connect to a WiFi Hotspot. If you want anywhere access then the iPhone is a better choice of device. 
    In the UK 'The Cloud' offers an iPod touch WiFi plan which gives unlimited access to their >7,000 hotspots for £3.99pm. I've not seen similar plans over your side of the world though.
    http://www.thecloud.net/page/4913
    regards
    mrtotes
    Message was edited by: mrtotes: spelling, punctuation etc.

  • How do I fix super slow internet - all browsers are affected

    There is some problem with internet connectivity with my MacBook Pro, but I cannot figure out how to resolve it.  Speedtest.net is measuring my internet speed at download speeds of 0.88MBps and upload of .84Mbps.  Other devices utilizing the same router also via wifi (my husband's MacBook Pro for example) are running at 4.08MBps down and 0.86MBps up.
    I've tried many things, but I must be missing something and do not understand what is causing the problem.  Please let me know what I need to do to resolved this.
    Symptoms are occurring across multiple browsers (see list below), and I also tried the iTunes store and it was also extremely slow to load.
    Safari 7.1.3
    Chrome Version 40.0.2214.111 (64-bit)
    Firefox 34.0.5
    and iTunes 12.xx
    Mail program also exhibits a lack of getting and downloading new email that I know if should download, because it shows up on our iPhone.  Attachments in Mail have also sometimes been blank with zero bytes, but if I restart Mail, sometimes those attachment then have data in them. 
    The Mail problem seems to be possibly intermittent, but the internet browser speed is really a significant and consistent problem.
    I have:
    Restarted our router.  (no improvement)
    Verified permissions.  (no improvement)
    Repaired permissions. (no improvement)
    Verified disk (it's okay). (no improvement)
    Safari>Preferences>Privacy>Remove All Website Data.  (no improvement)
    Safari>Advanced>Stop plug-ins to save power changed to "unchecked" (no improvement)
    Reset Safari (no improvement)
    Quit and Restarted Safari
    Firefox>History>Clear History (Browsing&Download, Cookies, Cache, Active Logins)
    Quit and Restarted Firefox
    Chrome>Clear browsing data
    Quit and Restarted Chrome
    Restarted the computer multiple times. (no improvements)
    Shut down computer, System Management Controller - SMC and Reset P-RAM.  After restarting after this last bit, speedtest.net clocked in a 4MBps when I first launched Safari, but 2 minutes later, it was slow again at 0.93MBps.
    System Preferences>Network
    Wi-Fi is "Connected"
    In "Advanced" -
    Wi-Fi: my Network Name is at the top of the list.  "Remember networks which computer has joined" is checked.
    TCP/IP: Configure IPv4 "Using DHCP"
    DNS Servers: 192.168.1.254 Search Domains: Home.  There is only one in the list.
    Proxies: No boxes checked.  "Bypass proxy setting for these Hosts & Domains: "*.local, 169.254/16"  "Use Passive FTP Mode (PASV)" is Checked.
    Hardware: Configure: Automatically.
    Please let me know any thoughts on troubleshooting and thanks!
    15" MacBook Pro 2.8 GHz, late 2009 model running OS 10.9.5.  Software Update - everything is up to date.  Including the Security Update 2015-001.  Internet was slow before this last update as well.

    Safari is not the only browser that's slow.  Will Safari slow down other browsers even if Safari is not running?  Right now I'm using Chrome after restarting and it remains very slow.
    Nonetheless, in Safari:
    In "Top Sites" of a new tab, I held down the Option key and clicked the "x" for every single top site so that the list is empty.  No change noticed.  I also emptied the folder for cache website previews in the library folder, but that has made no noticeable change after restarting.
    What do you mean by "sharing your devices?" Do you mean a network?  I don't have any podcasts, I don't know what you mean by this?  I also don't understand refreshing automatically?  I'm not running iTunes right now.
    I have taken a screen shot of Activity Monitor after restarting and this is what shows for CPU.  What data specifically are you looking to analyze in Activity Monitor?

  • HT1365 Why is my iPhone 4 running so slow? It will be connected to a secure wifi signal, with all the bars yet still say its unable to connect to the Internet. Plus, Internet aside, the phone overall is acting very unusual. Moving very slow.

    My phone is running so slow in every possible way, on the Internet or not. My apps are constantly crashing and I never used to have this issue before. Typing a text is absolute Chaos! I have turned EVERYTHING on and off. I have cleared out my running apps menu, history and cookies. I have even gone through it and deleted unwanted photos, videos and apps. If I lived closer to an Apple store I would just take it in as I have AppleCare. But I am over an hour away from the closest location. Has anyone else experienced these issues and if so how did you resolve them?  It almost seems like it has a virus or something. Please help! Any input would be fabulous!

    Hi Bob,
    That's the strange thing. When I had both GHz channels working on one SSID, once in a while my iMAC would pick the 5 GHz channel (44 seems the best for me). I always use channel 1 for 2.4 GHz because I get the fastest speeds with it.
    When the iMac would pick 5 GHz, the slowdown was very obvious. As I explained in my (long) first post, I immediately felt the difference. Now the $50K question - since the 5 GHz channel at that point was stronger than the 2.4 GHz one, why wasn't the speed faster? Why was it so slow compared to 2.4 GHz? That's what rattling my brain. If the 5 GHz signal's strong enough to get picked by my iMac, then why isn't there a commensurate speed increase? There must be something else going on here besides signal strength. If the 5 GHz spec says that I must have full strength to get 5 GHz speeds, then that makes sense. But I think it doesn't, that's why I believe I have a configuration problem somewhere, or a faulty AEBS.
    I might add that my firmware's up-to-date in the AEBS and AX, and Airport Utility too.
    I think heading to 4Runner's camp - even with high signal strength (and I would consider 3 of 4 bars high), the 5 GHz speeds aren't showing themselves.
    Here's some snap's of my AEBX's setup:
    I think my configuration's fine, although I've tried so many different options, I'm a little confused, but I know that changing the Multicast Rate doesn't have any noticeable effect on the speed. I also have "Use Wide Channels" checked, but as I said, the 5 GHz band is awfully slow for using both channels. I have set "N" only, so no "G" clients to slow it down.
    Mind boggling!

  • Suddenly cannot connect to Internet

    I am suddenly not able to connect to the Internet. I had not changed any settings. However, I did have some monitor freezing and garbled images on the monitor, for which I had to shut down and restart the computer a couple of times.
    I have ATT Uverse (no help from their support); my computer is connected directly via ethernet to a PlugLink 9650 Ethernet Adapter and to a Netopia Router. I no longer can share computers on my LAN.
    If anyone can glean some insight from the following diagnostics below, I would really appreciate some suggestions as to how to resolve this. I am planning to have a Uverse person visit my home to verify if it is a problem caused by Uverse or is something Mac related.
    Thanks for any help or suggestions,
    Shelley
    Network Diagnostics status:
    Using Automatic Location:
    Ethernet 1 is Green OK
    Ethernet 2 was Yellow and said No IP Address (This is the one plugged into the Netopia). I looked up the current IP address from http://http://checkip.dyndns.org/ , entered it and now it is Green OK
    Network Settings are Green OK
    ISP is Green OK
    Internet is either Yellow and when I go to a browser, it says "resolving host" but doesn't connect.
    Server is either Yellow
    Here is the Etresoft diagnostics:
    Hardware Information:
        Mac Pro - model: MacPro3,1
        2 2.8 GHz Quad-Core Intel Xeon CPUs: 8 cores
        18 GB RAM
    Video Information:
        ATI Radeon HD 2600 - VRAM: 256 MB
    Startup Items:
        HP IO - Path: /Library/StartupItems/HP IO
        MySQLCOM - Path: /Library/StartupItems/MySQLCOM
    System Software:
        Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:18:23
    Disk Information:
        WDC WD3200AAJS-41VWA1 disk0 : (298.09 GB)
            (null) (disk0s1) <not mounted>: 200 MB
            Macintosh HD (disk0s2) /: 297.77 GB (102.04 GB free)
    USB Information:
        FANTOM   WD10EAVS-00D7B1  931.51 GB
            (null) (disk1s1) <not mounted>: 200 MB
            Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 856.07 GB (474.26 GB free)
            Macintosh_HD_CLONE (disk1s3) /Volumes/Macintosh_HD_CLONE: 75 GB (8 GB free)
        Apple, Inc. Keyboard Hub
            Microsoft Microsoft Wireless Optical Mouse¬Æ 1.00
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. Apple Cinema HD Display
        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
        [not loaded]    org.samba.winbindd.plist
    Problem System Launch Agents:
        [failed]    com.apple.Kerberos.renew.plist
    Launch Daemons:
        [loaded]    com.adobe.fpsaud.plist
        [loaded]    com.adobe.SwitchBoard.plist
        [loaded]    com.adobe.versioncueCS4.plist
        [loaded]    com.autodesk.backburner_manager.plist
        [loaded]    com.autodesk.backburner_server.plist
        [loaded]    com.autodesk.backburner_start.plist
        [loaded]    com.barebones.bbedit.plist
        [loaded]    com.google.keystone.daemon.plist
        [not loaded]    com.mysql.mysqld.plist
    Launch Agents:
        [not loaded]    com.adobe.AAM.Updater-1.0.plist
        [loaded]    com.adobe.CS4ServiceManager.plist
        [loaded]    com.adobe.CS5ServiceManager.plist
        [loaded]    com.google.keystone.agent.plist
        [loaded]    com.hp.help.tocgenerator.plist
    User Launch Agents:
        [loaded]    com.adobe.AAM.Updater-1.0.plist
        [loaded]    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
        [loaded]    com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
        [loaded]    com.akamai.client.plist
        [loaded]    com.akamai.single-user-client.plist
    User Login Items:
        GrowlMenu
        iTunesHelper
        AdobeResourceSynchronizer
        MagicMenu
        TransmitMenu
        ExpanderDaemon
        MagicMenu
        StuffIt Destinations
        Google Drive
        AdobeResourceSynchronizer
        SPanel
        HP Scheduler
    3rd Party Preference Panes:
        Adobe Version Cue CS4
        Akamai NetSession Preferences
        Citrix online plug-in
        Flash Player
        Flip4Mac WMV
        Growl
        MacFUSE
    Internet Plug-ins:
        AdobePDFViewer.plugin
        AdobePDFViewerNPAPI.plugin
        CitrixICAClientPlugIn.plugin
        DirectorShockwave.plugin
        Flash Player.plugin
        FlashPlayer-10.6.plugin
        Flip4Mac WMV Plugin.plugin
        Google Earth Web Plug-in.plugin
        iPhotoPhotocast.plugin
        JavaAppletPlugin.plugin
        McpPlugIn.plugin
        QuickTime Plugin.plugin
        RealPlayer Plugin.plugin
        Silverlight.plugin
    User Internet Plug-ins:
        WBETools11.plugin
    Bad Fonts:
        None
    Top Processes by CPU:
             4%    EtreCheck
             4%    syslogd
             1%    fontd
             1%    WindowServer
             0%    SystemUIServer
             0%    SPanel
             0%    Finder
             0%    blued
    Top Processes by Memory:
        55 MB        WindowServer
        55 MB        Google Drive
        37 MB        Dock
        37 MB        Finder
        37 MB        mds
        18 MB        TransmitMenu
        18 MB        coreservicesd
        18 MB        SystemUIServer
        18 MB        loginwindow
        18 MB        netsession_mac
    Virtual Memory Statistics
        16.62 GB     Free RAM
        467 MB       Active RAM
        237 MB       Inactive RAM
        702 MB       Wired RAM
        198 MB       Page-ins
        0 B          Page-outs

    Packets bound for the Internet from your Mac will go over the topmost working interface shown in
    System preferences > Network
    So you need to decide what path they will be taking, and get that path working.
    Your Netopia Router already knows its own Internet-reachable name, or it cannot possibly talk on the Internet, and cannot get you to that lookup site. Every Router also uses a "private" IP Address to talk on your local Network. Those addresses will be from one of the three ranges that are not reachable from the Internet:
    IP address range
    10.0.0.0 - 10.255.255.255
    172.16.0.0 - 172.31.255.255
    192.168.0.0 - 192.168.255.255
    The Router generally takes the lowest address in one of those ranges (e.g., 192.168.0.1), and then assigns the addresses for other devices using DHCP (e.g., 192.168.0.2, then .03, then 0.4, and so on.)

  • Changing Sales Order in Internet Sales R/3 Edition

    Hi All,
    I am looking for information about Internet Sales R/3 Edition and I am trying to understand a little bit about it process flow and I have an imediate question:
    Is it possible to change a internet sales order after submiting it (for e.g changing item quantities, including new ones ore even deleting the sales order)?
    Every documentation I have searched (like the SAP CRM Best Pratices) only explains the creating and displaying process of sales order an nothing is mentioned about changing or even deleting those sales orders.
    Does anyone can help me on this?

    Hi Eduardo Trigo,
    Yes. You should be able to change the submitted internet sales order as long as the order status remains 'Open' i.e. the ordered quantities are not delivered.
    You should be able to see the 'Edit' button on an opened order as long as the order status is 'Open'
    If you delete all existing line items then the order will get deleted automatically.
    <b>Do not forget to reward if it helps</b>
    Thanks,
    Paul Kondaveeti

Maybe you are looking for