Is it possible put a dock on a external disp. while spanning

I was wondering if it is possible for me to put a dock and that menu bar that appears on the top of the screen on my PB on to an external monitor. I use monitor spanning on my 12 inch PB to make more screen real estate, but it bothers me that I gave to keep moving the mouse back to the 12inch PB screen to open programs, change settings, etc. Any tips would be much appreciated!

Yes, go into System Preferences/Display Preferences and in the place where you see the small facsimilies of the screens allowing you to arrange them, drag the menu bar from the PB's screen facsimilie to the external screen's facsimilie.

Similar Messages

  • I've installed LION.  Is it possible to put Snow Leopard on an external hard drive?

    I've installed LION.  Is it possible to put Snow Leopard on an external hard drive?

    I was unaware of this change for usb support! However Babowa makes a good point in that you would probably not want to run SL via USB and rather Firewire.
    Having said that, the 13" MacBooks do not have firewire.
    But again as Babowa points out, that machine wouldn't be able to run Lion anyway.

  • I was going to install Rosetta Stone Spanish onto my Macbook but am concerned about it taking up space on my 2GB hard-drive.  I have an external WD hard-drive; is it possible to put the application onto the external hard-drive to save space on my mac?

    I was going to install Rosetta Stone Spanish onto my Macbook 10.6.7 but am concerned about it taking up space on my 2GB hard-drive.  I have an external WD hard-drive, and I was wondering if it is possible to put the application onto the external hard-drive to save space on my Mac? 

    I think you're confused about how much hard drive space you have.  You probably have 2 GB of RAM...  there hasn't been a Mac shipped with only a 2 GB hard drive in a while.  At the bottom of any Finder window, how much space is available?
    If you're actually running low on space, you should move documents to the external drive, since many applications want to be on the system drive.

  • Can I put my library on an external hard drive and use it between two computers?

    Can I put my library on an external hard drive and use it between two computers? I have two MBP; I will refer to one as computer A and to the other as computer B. I would like to be able to plug in my external hard drive, boot up iTunes, and if there were any changes made to the library previous to its last time accessed on this compluter, they show up on that computer, regardless of being imported on the other.
    A hypothetical example: I import three albums called 1, 2, and 3 on computer A over a week or so. I take the external hard drive and plug it into computer B. The entire library which was visible on A, is visible on B, including albums 1, 2, and 3.
    Is this possible? If so, what files need to be copied onto the external? I'm trying some different combinations, trial and error basically. Hopefully someone knows and can answer before I mess up my library. I also want to do this to free up space on my computer. All importing will be done from disc.

    iTunes/Preferences/Advanced : point your iTunes to the new location of the Library.
    Set "Share on local network" in the Sharing tab, and you or everyone on the local network can play your music.
    You make a backup first of the Library.
    Move the follwing to the new location:
    /Users/your username/Music/iTunes/iTunes Music
    have fun.

  • I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

    I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

    Hello Els,
    it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
    To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
    To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
    Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
    And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
    http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
    Mac: Mac OS X (Use: Show additional download options)
    http://filezilla-project.org/download.php
    Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
    Good luck!
    Hans-Günter
    P.S.
    Since I use two screens, the whole thing became even more comfortable.

  • I want to take the photos off my iPhone and put them directly onto an external hard disk. I want to bypass iPhoto altogether. When I link my iPhone to my computer, it only opens in iTunes, which only gives me the option to save my photos to iPhoto. Help!

    I want to take the photos off my iPhone and put them directly onto an external hard disk - I don't have any room left on my computer. I want to bypass iPhoto altogether. When I link my iPhone to my computer, it only opens in iTunes, which only gives me the option to save my photos to iPhoto. Help!  This is seriously frustrating!.
    Additionally, I'd like to be able to take the 2000+ photos out of iPhoto and put them on a disk in a folder. I have managed to export them to the hard disk but it's just plonked all 2000+ photos in a list - not ideal if I want to use it for anything else. And then I have to manually delete the photos from iPhoto. Is there not a quick and easy way of dealing with this? 
    Anyone got any bright ideas? Thanks for your help!

    I too would like to be able to do this. Just put them where i want the. IFTT a scripting app will put the images in dropbox for you , but its been pretty iffy.

  • Does latest version of bootcamp installed on late 2013 rMBP put thunderbolt drivers for lacie external thunderbolt/USB 3.0 drive?

    does latest version of bootcamp installed on late 2013 rMBP put thunderbolt drivers for lacie external thunderbolt/USB 3.0 drive?
    I am wiping my current windows bootcamp partition and reinstalling windows using disk utility /bootcamp wizard to clean up and reinstall.
    just curious if the Thunderbolt drivers get installed from bootcamp/windows sofytware update as I can't remember iif i had to do it manually before. I do see it shows up on windows side in device manager and if it is pluggged in during boot screen (to windows 7 pro 64 bit) shows ASMedia drivers being loaded for it.
    Thanks

    thank you so much I was pretty sure it did but wanted to be 100% sure as purpose of clean install was to clean up some mishaps I did with office 2007 (custom install), etc.
    Many Thanks

  • Tree Structure - Is it possible to Open a Pop up/external window on select

    Is it possible to Open a Pop up/external window on select of any Leafe node or a parent node?
    My requirement is to create a webdynpro screen which depicts the transaction :
    ooqa in sap R/3.
    Is it possible to do that in tree structure?
    Thanks & Regards,
    Sirisha.RS

    Hi Ayyaparaj,
    Thanks for ur reply.
    but i cant use a table here. I just need a tree structure..
    I guess Its posible by writing a code for a external window open in the onselect method itself.
    Thanks & regards,
    Sirisha.Rs

  • Is it possible to loop a Keynote presentation on an external display while working in another program (say numbers) on my laptop screen?

    I have a 2012 MacBook Air.
    What I would like to be able to do is plug into an external display and project a looping Keynote presentation on the external display. The problem is when I play the Keynote presentation, my laptop screen goes black. Is it possible to play/loop a Keynote presentation on an external display while working in a different program (Pages, Numbers, etc) on my laptop screen?
    Thank you!

    Grant Bennet-Alder West of Boston, USA 
    A new 1TB External drive (suitable to replace your current Internal drive if you choose to) and enclosure can be had for under US$160
    Ehh, you meant $60 ,  not $160
    CassHeger 
    I do need to buy an external HD to be used solely for that purpose.
    Yes, quality HD are cheap as dirt.
    however a likewise Toshiba Internal HD 1TB is $70   (same as used by Apple)
    http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb   -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c3 2 9263f2
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim and perfect
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive  
    $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
    Most storage experts agree on the Hitachi 2.5"

  • Is it possible to get images automatically into text captions while simulation recording?

    Is it possible to get images automatically into text captions while simulation recording?

    I want that will be like described below (as it works in another software for captioning):

  • If it is possible to install linux on a external hard drive?

    If it is possible to install linux on a external hard drive, which can be boot from the my MacBook Pro? the reason I didn't try it is beacause that I don't know what it will do to my internal mac os x 10.5? Will it mess up my boot to my leopard?

    it's possible, but difficult. i'm in the middle of trying to get this to work on my MacBook, but not there yet. The best resource i've found is here:
    http://ubuntuforums.org/showthread.php?t=510030
    from what i've learned so far, in order to be able to boot linux on an external drive, the actual /boot partition must be on your internal drive. osx leaves a small (~130MB) partition unused, which can be used for this.
    i think it would be easier to run on a partition of the internal drive, but now that i've started trying the external setup, i really want to make it work.

  • Should i put my table in my external style sheet?

    Should i put my table in my external style sheet? if so how do i do this?
    i'm having serious problems trying to stop my menu bar and header to stop jumping around when a switch pages. I realised i needed to create an external style sheet. however, when i extracted the ccs styles from my one of my pages (my homepage), there is only styles for my spry menu bar, nothing else. - however this doesnt stop my menu bar from moving around. all of my pages are use tables. so my menu bar and header are both 'td' rather than in a div or wrapper.
    it seems as though nothing i try will stop my items from moving around. they are all exactly the same width and height in html and the same in css. I know about attaching style sheets, but i just cant seem to understand how to get everything aligned properly. I want my external style sheet to have my header at the top and centre, and my menu bar underneath and centre. How do i do this using a table? do i put the table into the external style sheet so that my table measurements etc are the same for each page? + how do i do this? Does anything else other than positions, colours, fonts etc go into my external style sheet? cos im aware that i use the html for the things i want to look different and every page, and the css for the things that i want to look the same. so which stuff goes in which? im getting really confused now, does my header and menu bar need to go in my external style as well as my html? :S
    everything just seems to have gone horribly wrong, ive tried so many things, but everything i try simply has no effect. blahhh :/

    and this is the external style sheet, which i extracted from my home page (the top code). what do i need to add to this?
    @charset "utf-8";
    body {
                        margin: 0px;
              border-left-style: none;
              border-left-color: #CCC;
              border-bottom-color: #FFF;
              border-bottom-width: 25px;
              border-bottom-style: solid;
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
              padding: 0;
              list-style-type: none;
              font-size: 100%;
              cursor: default;
              width: 640px;
              margin-bottom: 0;
              margin-left: auto;
              border-top-style: none;
              border-right-style: none;
              border-bottom-style: none;
              border-left-style: none;
              border-top-color: #000;
              border-right-color: #000;
              border-bottom-color: #000;
              border-left-color: #000;
              margin-right: auto;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
              z-index: 1000;
    #header {
              clip: rect(auto,auto,auto,auto);
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 100%;
              position: relative;
              text-align: left;
              cursor: pointer;
              width: 8em;
              float: left;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
              margin: 0;
              padding: 0;
              list-style-type: none;
              font-size: 100%;
              z-index: 1020;
              cursor: default;
              width: 278px;
              position: absolute;
              left: -1000em;
              height: 48px;
              top: 55px;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
              border: 1px solid #CCC;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
              left: 1px;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
              width: 8.7em;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
              position: absolute;
              margin: -5% 0 0 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
              left: -269px;
              top: 5px;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
              display: block;
              cursor: pointer;
              background-color: #FFF;
              padding: 0.5em 0.75em;
              color: #000;
              text-decoration: none;
              font-family: Pristina;
              font-size: 21px;
              text-align: center;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
              background-color: #FFF;
              color: #999;
              font-family: Pristina;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
              background-color: #FFF;
              color: #999;
              font-family: Pristina;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
              background-image: url(SpryAssets/SpryMenuBarDown.gif);
              background-repeat: no-repeat;
              background-position: 95% 50%;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
              background-image: url(SpryAssets/SpryMenuBarRight.gif);
              background-repeat: no-repeat;
              background-position: 95% 50%;
              font-size: 21px;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
              background-image: url(SpryAssets/SpryMenuBarDownHover.gif);
              background-repeat: no-repeat;
              background-position: 95% 50%;
              font-size: 21px;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
              background-image: url(SpryAssets/SpryMenuBarRightHover.gif);
              background-repeat: no-repeat;
              background-position: 95% 50%;
              font-size: 21px;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
              position: absolute;
              z-index: 1010;
              filter:alpha(opacity:0.1);
              font-size: 21px;
              ul.MenuBarHorizontal li.MenuBarItemIE
              display: inline;
              f\loat: left;
              background: #FFF;
              font-size: 21px;
    body {
              margin: 0px;
              border-left-style: none;
              border-left-color: #CCC;
              border-bottom-color: #FFF;
              border-bottom-width: 25px;
              border-bottom-style: solid;

  • How is it possible that my Imac says: no available updates while I am running 10.6.8??

    how is it possible that my Imac says: no available updates while I am running 10.6.8??

    McS1672 wrote:
    how is it possible that my Imac says: no available updates while I am running 10.6.8??
    This Usually means your Software is Up to Date...
    Were you looking for any Particular Update...?

  • Possible to Lock Dock icons?

    I use a Wacom tablet and some times it is possible to 'swish' the cursor by the dock items and accidentally drag one onto the desktop where it goes 'Poof.' Since I have lots of applications I'm not always sure which one went 'poof' - it happens too fast.
    My question: I am happy with the way the icons are on the dock - is there a way to lock it so they cannot be accidentally removed?
    TIA,
    Ken

    Kenneth,
    There is no option within SL to "lock the dock". I really wish there was.
    I'd also like to see desktop icons not sized from the "pinch" option on trackpad. Those would be two great Enhancement requests.
    Regards,
    Captfred

  • IPod freezes when put in dock, EVERYTIME!

    Hi all-
    Ever since the newest version of iTunes (7.0.1), I have had freezing problems with my 5th generation 30GB iPod. I put it in the dock, and the "DO not disconnect" icon comes up and freezes, and the iPod will not show up on my desktop or in iTunes unless I reset it. This happens EVERY time! Any solutions? I'm up to the second on software updates.
    Thanks all.

    Hi all-
    Ever since the newest version of iTunes (7.0.1), I have had freezing problems with my 5th generation 30GB iPod. I put it in the dock, and the "DO not disconnect" icon comes up and freezes, and the iPod will not show up on my desktop or in iTunes unless I reset it. This happens EVERY time! Any solutions? I'm up to the second on software updates.
    Thanks all.

Maybe you are looking for

  • Can two iphones on different accounts sync from the same itunes account?

    I have an iphone through work. The iphone along with four other various types of ipods sync with my accounts on iTunes, including thousands of purchased songs. My wife is getting an iphone but she had to do if through her work. How do I make sure she

  • Passing CUF fields from SRM to ECC 6.0 and PO in Held status

    Hi All, We are upgarding from SRM 5.0 to SRM 5.5 ( New system ) and 4.6C to ECC 6.0. We have implemented classic scenario. All the codes (BADIs) have been copied to the new systems. We are facing two issues here 1. CUF fields are not being passed to

  • How to cancel icloud erase mac

    Having lost my MacBook Air, I went into icloud and chose the "erase all data" option.  Luckily, i then found it back.  I still have not connected it to the internet but will have to do so.  Does anyone know how to cancel the "erase all data" request?

  • How to put back a key?

    a key of my PB just came out... i've tried to put it back, buyt since its a fragile piece I'm a bit affraid to F%$#"K it! It's not broken the key! Can someone help? THKS All!

  • Postage report with automation and nonautomation

    Has anyone ever seen postal report generate two postal reports for one mailing? Where non-automated pieces weren't included.