Is it possible run a single 1510 AP without a wlan controller?

I am wanting to test one Aironet 1510 Wireless AP without running a Wireless LAN Controller, is this possible? I cannot find any documentation for being able to do this.

Hi Jason,
Unfortunately, you do need a wireless controller to operate the 1510 series.
The 1510 is a lightweight access poing; that is, it requires firmware and options that only a controller can provide.
If you need an outdoor mesh AP, you can check into the 1520 series, which is available with a standalone IOS. If you just need a rugged outdoor AP, the 1300 series is available as a standalone AP.

Similar Messages

Running Multiple SQL in a Single Worksheet: Can I Selectively Run a Single SQL and Append Output?

In any release of SD, if I have a single worksheet containing 10 sqls. Is it possible to place the cursor on any of the sql and run only that sql, yet, append its output to existing output window. I can then select another sql and execute it and keep appending output. In other words, do not clear existing output or start a new output tab.
As it exists today (in any release), I can either 'run script' which does append, but it executes all the sql (non-selective). Alternately, I can 'run statement' to selectively run a single sql, but it will clear the output window (or if pinned), start a new one. None of this is what I want.
Thank you.

Select the query you want to run. Execute it via F5. Then highlight the next query and repeat.
The output will append to the Script Output panel.
There's no way to get 2 queries to share a grid, unless you were to run them as a single query a la UNION.

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?

Thanks
2 бер. 2015 15:50, користувач "Peru Bob" <[email protected]> написав:
If I am buying single app adobe premier pro by annual prepaid
plan,after the after the end of the year subscription would it be possible
to use the program further without updating or I should pay each year?
created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Premiere
Pro* - View the full discussion
<https://forums.adobe.com/message/7243337#7243337>

Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4.

Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4 (I am a fireman).

No iPhone apps have access to the necessary API's to do so...they're all sandboxed.

I have a very old G$ that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. Thanks!

I have a very old G4 that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. I would rather not buy the old 10.2.8 system as it is expensive. Thanks!

Need to know which newer one, some cannot run 10.2.x.
One solution might be to clone the 10.2.8 Drive to another drive, then Install a later OS on it Preserving Users & Settings.
Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
Relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Is it possible UPLOAD a single printer from an LDT with a lot of printers?

is it possible UPLOAD a single printer from an LDT with a lot of printers? by using FNDLOAD
here we can
download a specific printer definition, we need to follow the below syntax
FNDLOAD apps/ 0 Y DOWNLOAD $FND_TOP/patch/115/import/afcppinf.lct
source_printer_def.ldt FND_PRINTER PRINTER_NAME=[printer name]

Duplicate post -- migrate printers, types, styles and drivers from an 11i to R12 instance us

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

Is this possible in a single query?????

While I don't think this is possible in a single query, I definately don't have the background the experts here have.
I have a request to identify all shipments in a period/range of periods that have a payment transaction. For those shipments, the user wants a list of all payment transactions and the initial accrual entry listed by period for potentially a large range of periods. The accrual and payment entries are identifed by the same characteristic and a 0Amount key figure contains the values. A couple methods I have tried I have listed in previous threads with either errors or the query blowing up with what appears to be a cartesian product issue.
Anyone done something like this who can provide pointers.
Bill

Hi Bill,
Why dont u use RRI-report to report interface for this Requierment ??
There are lots of threads on RRI ,just follow them and u can satisfy this requirement.
1)Query A for Shipments
2)Query B for Payment Transactions.
Call report B from Report A
1)GOTO RSBBS
2)Create New
3)Sender Query Give the First Query Report A
4)Below sender Query there is Receiver Query  give the RRI query report B (The query which u want to call).Report type should be BEX ,and Target system--Assign the System(Local) and in the report give the Report B.
5)In the Report A check whether in the GOTO -u get the Receiver Query ,i.e Report B.
Hope this help !!!!!!!!!
Rgds
SVU123

Is it possible run a Wireless LAN controller without a WCS?

is it possible run a Wireless LAN controller without a WCS?
How Can I configure the Wireless Lan controller?
Thanks

Hi Alfred,
The WLC can be completly configured and operated without the WCS. The WCS is a nice addition for the management especially when running multiple WLC's but is not required.
Info on WLC (with Video);
http://www.cisco.com/en/US/products/ps6366/index.html
Info on the WCS;
http://www.cisco.com/en/US/products/ps6305/index.html
Hope this helps!
Rob

Any possiblity to use single Inbound Service Interface with multiple Receiver Agreements

Hi All,
Scenario: PROXY to FILE.
Requirement is to receive to two locations.
Is it possible to use single Inbound interface with multiple Receiver Agreements. I tried using two operation in the Inbound Service Interface, and Operation Specific in Determination. But couldnt proceed further. Do I need to use seperate Service Interface for two receiver locations?
Please suggest some solution.

Hi Naveen,
There is a possibility but in the case in the same server location with dynamic configuration: Placing file in two different directories using single receiver communication Channel
With different location you would need to develop a new adapter module as Amit Srivastava explains and develops here Send File to Two Different Locations using Adapter Module
Regards.

Is it possible to run internet in blackberry phone without having BB internet plan?

Is it possible to run internet in blackberry phone without having BB internet plan?

On the Torch model yes, you can use the WiFi connected Hotspot browser for internet surfing and a few other applications, but very few BlackBerry data applications.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sarà possibile eseguire su osx mountain lion 10.8.4 osx mavericks GRATUITAMENTE? ..........It will possible run osx mavericks free on osx mountain lion 10.8.4?

Sarà possibile eseguire su osx mountain lion 10.8.4 osx mavericks GRATUITAMENTE? ..........It will possible run osx mavericks free on osx mountain lion 10.8.4?

It won't run "on" Mountain Lion as it is a new OS. It will replace Mountain Lion. While pricing hasn't been announced, I doubt it will be free.

Why does my event structure run a single click when I double-click?

I would like to treat single-clicks differently than double-clicks but it appears that when I double-click an item on a Front Panel control it runs the single-click event once before running the double-click event. I would like the single-click event not to trigger if the user double-clicks.
I am discarding the "Mouse Down?" filter event then using the "Mouse Up" notify event to try to catch the difference between a single-click and double-click.
Should I be doing something different with the timeout event (right now it does nothing)?
Should I stop displaying the event type?
Should I eliminate the 5 msec Wait in the Producer Loop?
Should I use the "Mouse Down" notify event instead of the "Mouse Up" notify event?

JeffOverton wrote:
If you edit the event cases, is the "Lock front panel until the case for this event completes" box checked?
I think this is a key configuration to understand.
The current configuration means that the 'mouse up' event for the first click is triggered. Then immideatly the front panel is locked. The second click needs to wait until the event has finished. So I think unchecking that box might improve the code.
Yes you should remove the 5 ms. wait, it has little purpose. It might even cause this: Click 1(& lock), wait 5 ms, event 1 (&unlock), click2 (no double click anymore).
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Is it possible to show single dimension of measure value in Chart

Hi all,
              By using BICS connection(BW-Bex Query), developed Application(dashboard) through sap design Studio 1.2 sp01. My requirement is Measure is Purchase OrderValue, and dimensions are x,y,z, and P. When Open application it has to show X-of Purchase Order values in one Chart,Y-of Purchase Order Value in another chart..like we need to show X,Y,Z and P values in different chart. How we can achieve by using single data source.
Thanks
Ram

Hi Tammy,
          Thanks for your quick reply. You are right.. we can create multiple views to show separately. but due to performance issue..is it possible to use single view to finish my requirement?
Explanation: i have 4 charts
1 chart: In X-Axis need's to show X-Values and in Y-Axis need's to show PO value
2 chart: In X-Axis need's to show Y-Values and in Y-Axis need's to show PO value
3 chart: In X-Axis need's to show Z-Values and in Y-Axis need's to show PO value
4 chart: In X-Axis need's to show P-Values and in Y-Axis need's to show PO value
            here X,Y,Z,P are dimensions(fields).
                unable to add image..
Thanks
Ram

OLE DB provider 'MSOLAP' cannot be used for distributed queries because the provider is configured to run in single-threaded

Hopefully this will save somebody some trouble.
Running 64bit Enterprise SQL and SSAS with Service pack 2 installed.
Also running Proclarity so 32bit mode Reporting Services is running.
When trying to create a linked server to my OLAP database I was continually getting the following Error:
OLE DB provider 'MSOLAP' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode. (Microsoft SQL Server, Error: 7308)
Many posts suggested I select the "in Proc" check box under the olap provider, but this did not help.
Finally, instead of using the IDE to create the linked server I used a script to call sp_addlinkedserver and used @provider='MSOLAP.3'. This fixed the problem.
If you have a more clear idea of why I was having the issue in the first place, feel free to let me know what you think.

Try this thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/f02a3921-7d0b-4038-97bb-9f17d381b345/linked-ssas-server-fails?forum=sqlanalysisservices
Talk to me now on

Is it possible run a single 1510 AP without a wlan controller?

Similar Messages

Maybe you are looking for