Is it possible so zoom vertically the track in the timeline? Or only horizontally?

Hi people!
Is it possible, in garageband '11, to zoom vertically the tracks in the timeline? Or only horizontally?
Cause in logic pro I know that I zoom either in and out regions in the timeline... But in garageband I'm able only to make an horizontal zoom... Enlarge vertically the tracks could help me a lot when work with the automation curves.
Thanks lot,
Peace

FranzFromFar wrote:
Is it possible, in garageband '11, to zoom vertically the tracks in the timeline? Or only horizontally?
only horizontally, though the editor can be stretched vertically:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqstretchingeditorpane
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

HT1473 When I copied my CD to my itunes library the tracks of the cd are not together.

How can I group the tracks of the cd I imported together under one album name

Check the information on the tracks not group together to see if there are differences in the information. I have seen the spelling of the album name be different that would cause the tracks to be separate. A number of albums that I have have the main artist, but then have other artists in specific tracks (Artist A, featuring Artist B). Make sure the "Album Artist" is the same. I believe that is what iTunes looks for when combining into one album.

TS1424 Hello I just porchased and downloaded a new music album. Though the downloads were complete all the tracks on the album are not complete. What can I do?

Hello I just porchased and downloaded a new music album. Though the downloads were complete all the tracks on the album are not complete. What can I do?

Depending upon what country that you are in (music can't be re-downloaded in all countries) have you tried deleting those tracks from your iTunes library and redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes ? Re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

My macbook was stolen. Track my iphone emailed me that it has accessed the internet. How do i view where it is? Does the tracker show the actual address.

My macbook was stolen. Track my iphone emailed me that it has accessed the internet. How do i view where it is? Does the tracker show the actual address.

see
http://www.macworld.com/article/2034795/how-to-track-a-lost-computer-with-find-m y-mac.html
also see thread
with kappys excellent answer if Find my mac was not enabled on a mac
https://discussions.apple.com/message/23381693#23381693

I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

I just hear the effects on the track, and the actually vocals are faint. How do I fix this?

3xlouder wrote:
I just hear the effects on the track, and the actually vocals are faint. How do I fix this?
try toggling the Ducking menuItem

HT1338 if i don't keep my finger on the track pad the laptop shuts down

if i don't keep my finger on the track pad the laptop shuts down

Hello Ybakhat,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The computer sleeps or shuts down unexpectedly.
Best of luck,
Mario

Dragging multiple media clips into vertically stacked tracks in the timeline? Is it possible?

Hoping that some Adobe Premiere Guru might be able to lend some insight into what seemingly should be a fairly simple thing to accomplish... but despite scouring the web, I can't seem to find a peep of a solution for it.
My neighbor (whom, incidentally, I convinced to go with Premiere CS5.5 as his NLE of choice in the wake of the FCPX uncertainty) is working on a "reality-style" project where they have a massive amount of cameras running simultaniouisly for hour upon hours on end. Think Big Brother House style.
Essentially for each hour of the footage, he is creating a project in which all the multiple camera footage (MOV) from that hour is listed/linked over in the project panel. For example, for HOUR ONE he has the footage from all 20 cameras (or whatever) for hour one listed there.
BASICALLY what he wants to be able to do is grab ALL the footage from those various cameras AT ONCE, DRAG them over to the timeline and when he drops them there, the video (and, inversely, the audio) clips STACK vertically, one on top of the other, each one taking its own track in the timeline.
Currently, of course, when he does this the footage arranges itself in the timeline end to end. In the case of my HOUR ONE, 20 CAMERA example, this basically creates a 20 hour long clip, as oppossed to a one hour clip with 20 tracks, stacked one on top of the other.
As near as we can tell, there's no keyboard shortcut to make this happen. I VAGUELY recall being able to do this in FCP (maybe?) so I'll be stunned and more than just a little bit disappointed to if there isn't SOME way to pull this off in Premeire.
Does anybody have any idea if this mode of automatically dropping clips into the timeline as stacked tracks is possible? It will, quite literally, save him hours and hours of work if he can figure out the secret. And I won't feel quite so guilty for having turned him onto Premiere for this specific project!
And if anyone knows for a fact this is NOT possible, that would be great to know as well. At least we can put the notion to bed one way or another.
Thanks in advance.
Regards, Michael

You can do this with the make multi-camera source sequence command in Premiere Pro CS6 (note that this was posted before CS6 was launched):
Mark the clips
Select the clips
Choose Clip > Create Multi-Camera Source Sequence
Choose the style of synchronization and click OK
Right click on Multi-Camera source sequence and choose > Open in Timeline.
Clips are now stacked up inside of a sequence
More here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html#source_sequence_for_multi_camera_editing

HOW YOU GET IMOVIE TO SELECT/TRIM ALL THE TRACKS IN THE TIMELINE?

trying to burn dvd of my vacation and imported the clips from the camera into imovie. worked great. i imported my audio into garageband to add some filters, compression and eq, and imported it back into imovie as a separate track. then, i muted the origional audio track from the camera. still great. now, i need to trim some clips because idvd says my movie too long to burn on a single-layer disc. not great, *****! so, then i went back to imovie and trimmed a clip and now the audio that is after the trimmed track is totally out of sync. really really *****!!!! it turns out that imovie only trimmed the video and left my second audio track alone. WHY??? ***!!! does anyone know how to trim clips so that imovie trims all the tracks? do you hold down 'shift' or 'option' or something??? there must be a way to do it. HELP!!! god, i hope i can burn this disc sometime in 2007.

yea, thanks matt but i thought of that. if i do that i have to do my whole idvd project over again. i dont think i have enuff sanity left for that. i have a really complicated idvd project thats totally done. i think im just gonna burn it to a DLdisc instead.
but hey, maybe you can help me with this question:
i made a disk image of my vacation in maui, which is 1 hour 43 mins & chose the 'best quality' option. it has lots of violent ocean footage w/lots of motion, crazy colors, rainbows etc. its taken from a canon alura dv cam & looked awesome in imovie. my imovie project is roughly 23gb. when i watched the 4gb disk image that idvd created in DVD Player, it looked really blocky especially in the water/ocean scenes. like a bad divx rip from 1997, haha. im not happy with it at all. i kinda thought about how idvd would get 23gb compressed down to 4gb and worried about how it would look. well, my worring paid off cause it looks like crap.
then, i looked at the project info window in idvd. if i select 'best performance' the capacity changed from 3.6gb to 6gb, whoa??? uh, that doesnt make sense. \ im gonna try to encode it using this 'best performance' that they speak of, and see if it helps. i just want my movie to look good and ill do anything, ill use a dvdisc if i have to! why spend hours making a perfect imovie/garageband/idvd project if your source footage looks like dog poop in the final stage. im assuming it will look better when i select this 'best performance' thingie because common sense and logic tell me 6gb is bigger than 3.6.
then i got really CRAZZIIEE and looked at the 4gb idvd image next to 1 of my source .dv files in vlc player. vlc player says my disk image is getting about 4-6,000kb/s fluctuating, BUT my .dv file is 30,000kb/s sustained!!! how do i get 30,000kb/s sustained on my dvd??? wow, that would be great!!! prob not possible with my luck? my dvd player will explode into flames when i try to play it, right? also, how can i get the quailty higher? idvd is only going to use 6gb of a dual-layer disc, why if it has the capacity to hold 9gb? any help would be greatly appreciated!!! i thought about dvd studio pro but i would only try that if it will import my idvd theme perfectly, cause im not doing all that crap again. if im stuck with a 9gb dldisc that only used 6 gb, at least thats better than 3.6gb. ill settle for that if i have to.
mahalo,
jarett

When I download a long album from ITunes containing like 20-30 tracks, why does ITunes sometimes segregate one track and create a separate album out of it. I can merge the track into the other tracks on a playlist, but I can not merge the 2 albums.

When I download an opera album with lets day 40 songs (tracks). Why does iTunes create one album of tracks lets say 1 through 22, skip 23 and then 24 through 40. Then a separate album with track 23 is created. I can merge them together in a playlist but not as a single album. I go into the info under the file menu for each and make sure the information is the same but they still will not merge.

I'm not sure why this happens, but I found a workaround. Below the album title it will list the artist(s). The issue seems to happen when there are multiple artists. For example, an Album titled "Over the Sea to Skye" has The Chieftains and James Galway as artists. Some tracks (for whatever reason) will list only one of these and result in the playlist showing what appears to be multiple albums. You can click on the artists and it will highlight. Paste in what is appearing on the other "albums" and it will then show as one:
Hope that is somewhat clear enough to help. Doesn't fix whatever the issue is but it is a workaround. For me this is only happening with CD's that I have imported.

I was reviewing my list of songs in my library "on my I-Pod". I noticed that a few of the songs on the list have an Exclamation Point in front of the track, and the track won't play. How do I get rid of the Exclamation Point so that the track will play.

I was reviewing my list of songs in my library "on my I-Pod". I noticed that a few of those tracks on the list have an Exclamation Point in front of the track and will not play. How do I get rid of the Exclamation Point so that the track will play.

Hello enrique a.
Instead of trying to re-invent the wheel on this one, take a look at an article such as this one to help you take care of these exclamations. Basically, it means iTunes is unable to locate the file on your computer anymore.
http://ipod.about.com/od/itunesproblems/qt/Fixing-The-Itunes-Exclamation-Point.h tm
B-rock

JUST BOUGHT A TRACK - WILL NOT SYNC - A BROKEN CIRCLE IS ON THE LEFT OF THE TRACK IN THE LIBRARY - WHAT DOES THE CIRCLE MEAN? HOW DO I SYNC?

Hi, having problems syncing a new track I have bought - a broken circle is on the left of the track in my library!

Can you post the HTML that calls for the applet?

Can I change all the outputs on all the tracks at the same time?

When switching from my home with my interface (output 3-4) to somewhere else where I don't have my interface, I have to change each track individually to output 1-2 so I can hear it. It takes forever because I have several tracks. Can I do them all at the same time?

with the mixer window open, highlight all the tracks, you do this by clicking and dragging over all of them, or hold shift and select each one. now your tracks will be temporarily linked.. and what ever you do to one track will effect all of them. Cheers.

My music app detect the track but the title is grey out, i cant select or play it directly, what i can do is select near by track and skip to that track, im using ios7,

Hi
I just updated my iphone 4s to ios7
Last time on ios6, i could play the track normally
But after i updated to 7, some of my music is unplayable directly
First it wont detect the track
If it do detect it, the track title will gray out and i cant select it
All i can do is select nearby track and skip to that track to play it
Any help would be appreciated
Thanks

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Is it possible so zoom vertically the track in the timeline? Or only horizontally?

Similar Messages

Maybe you are looking for