Is it possible that a document (in this case an Appleworks or Movie Magic Screenwriter) can be lost forever, but it's contents somehow remain as other file types elsewhere? I have an old hard drive and I need to locate the contents of these files.
I have a 20 gig hard drive from a 2001 iBook. When my iBook crashed back in '04, there was a screenplay on there that was not saved anywhere else. It has tremendous sentimental value to me, and I would really like to retrieve it. I've ran some data recovery software that's uncovered a gargantuan amount of data, most of it being completely unreadable to me.
Additionally, I have found an AppleWorks file that could be the script, but it is ZERO bytes in size, and Pages won't even open it, saying that it is not a valid AppleWorks file.
So I'm curious...is it possible that the document is lost, but somehow the contents of it are somewhere else on the drive as metadata in other unreadable formats. And if that's the case, how would I go about translating the unreadable data back into something that IS readable?
Hello,
toddisalive wrote:
Additionally, I have found an AppleWorks file that could be the script, but it is ZERO bytes in size, and Pages won't even open it, saying that it is not a valid AppleWorks file.
if the size of this file is really ZERO bytes, either the original file contained an empty data fork and a resource fork which was stored elsewhere (*) or the file is too damaged to retrieve anything. Moreover, as AppleWorks never generates file with empty data fork, at least to my knowledge, ....
Concerning the Movie Magic ScreenWriter files, the application seems to exist for Yosemite http://www.write-bros.com/movie-magic-screenwriter.html ( but it seems "expensive" and I do not know if it accepts to import old files )....
(*) maybe in .TOTO or __MACOSX/.TOTO if the filename is TOTO
Similar Messages
-
My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)
See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciatedDid you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder. -
I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.
deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option. -
Recovery of old programs from old hard drive and old operating system
Have new computer with Windows 8, installed my old hard drive from old computer running Vista, want to get access to my Adobe programs from that old hard drive and system. Can you help?
Not unless the installers are on that harddrive.
What version of Adobe software did you have installed on the old machine? Please keep in mind that anything older than CS6 could be a crapshoot on Windows 8. -
My old PC crashed and I ended up buying a new one. I was able to recover all my music from the old hard drive and restore it in itunes. I purchased a new album online thru itunes and added it to my library. When I tried to add the album to my 6th nano it wouldn't download. All the tracks are check marked and I can listen to the album on my pc but it won't sync onto the ipod. The new pc is authorized, any ideas?
You can only sysc with one iTunes library. The new computer is a new library. You have to restore your iPod on the new conputer and then sync.
-
Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB could you please help !!
You can replace it with a solid state drive, see the one OWC sells here. The video on how to install it is here.
iFixit.com has used hard drives available here.
If it were me, I'd go with a solid state drive, as the prices have come down recently and the performance improvement is noticeable. -
I just formatted my hard drive and I need to find out what my "wireless password is"
I just formatted my hard drive and I need to find out what my "wireless password is". I was in a hurry when I did format my PC that when I got to given my wireless a password, I used the same one as before. Now I have tried to finding what it is for my other products, I don't know where to look. Do I or can I change the password without losing anything? Need help PLEASE
[Personal Information Removed]Hi:
You need to read your router's configuration instructions on how to access the router's menu.
Hopefully you can access that and in the wireless security menu you will find the passkey to use.
Paul -
I have an external hard drive and want to know how to transfer files to my new lap top Window 7
I have an external hard drive and I want to transfer my i-tune files to my new laptop....Anyone done this? What must I do?Thanks
These are two possible approaches that should work.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
tt2 -
I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.
after some sorting out your article, I clicked on a question mark with the message find the missing folder. This brought me to a page where I could choose a folder by year and click on it. The question marks disappeared and the photos were available. In some cases I had to click on the year folder for each subfolder by date.
The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself. I appreciate your help big time!! -
I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!
Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!
-
My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.
There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps.
Maybe you are looking for
-
Scheduling lines are not created in mrp running
Line 1 & 2 are having same items with different schedule lines qty 250 & 275 nos. respectively. Stock was 250. System bokked stock 250 against line 1 & given proposed delivery date for line 2. In MM module, by running MRP system generated requirement
-
Can't install oracle 10g on windows 2008 R2
Please help me I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com and oracle 11g i not license Where can download file oracle install 10.2.0.4 tha
-
Using registered trademark symbol in xml to be viewed in flash
I am trying to add a registered trademark symbol in a XML file to be viewed in flash. The codes '®' and '®' will not work and display as nothing. The XML file is encoded as UTF8, any ideas will be greatly appreciated. thanks
-
Using In Clause in SQl in Forms!!!!!!!!!URGENT
Hi... I have procedure returns to me many values(char) seperated by commas(,) and i want to pass these values to cursor usin IN clause...Ex. :Text_Value:=1,2,3,4,5 Cursor C1 is select empno from emp where empno in (:Text_Value); In this case it is no
-
Hi Gurus, The user submitted an excel sheet of TB and COPA reconciliation. One column contains the TB amounts and the COPA in another column. I can not run the COPA report by myself. The report also contains rel. gl numbers. When I tried to get l