Is it possible that Exchange UM could be configure with two call managers over the same sip?

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Similar Messages

Is it possible to have 2 icloud (from 2 different iphones with different apple ids) on the same computer?

I am inquiring as to if you can 2 different icloud accounts (that come from 2 different iphones with different apple ids) on the same computer. I would like both iphones to be able to back up to the same computer since we have different accounts/pictures/mail etc.

Yes, if you create 2 seperate user accounts.

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

How can i hide phone apps so that if kids take my mobile the couldnt be able to make calls. At the same time when someone call me I could be able to attend call. is there any control to lock phone's apps or hide it.

how can i hide phone apps so that if kids take my mobile the couldnt be able to make calls. At the same time when someone call me I could be able to attend call. is there any control to lock phone's apps or hide it.

Hi there
Apple doesnt give this feauture and there are certain apps in app store under utilities which provide password facility under this app and u can store photos videos and orther stuff and lock so
Kids will be not able to access this single app ortherwise there is no such feature of locking apps feature given by apple
<Edited By Host>

How could I play and transmit a stream from the same camera

How could I play and transmit a stream from the same camera?

Hi,
As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
If someone already did that, please, correct me if my procedure isn't right!
By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
RGB

I'm investigating whether I can take on 'Lion' when it's released. The information states that your mac needs Intel Core 2 Duo. Is this the same as '2 GHz Intel Core Duo' which is what it actually states my mac has?

I'm investigating whether I can take on 'Lion' when it's released. The information states that your mac needs 'Intel Core 2 Duo'. Is this the same as '2 GHz Intel Core Duo' which is what it actually states my mac has when I click 'About This Mac'?

I could not agree more! My MBP 2007 Intel Core Duo has had its logic board replaced not to long ago (DVI port died). The original hard drive is running great and I am running Snow Leopard wonderfully.
I was amped during the keynote and am really looking forward to Lion. I know the community is working hard to uncover a workaround because at present time, the solution (by new!) is not a worthy one. Especially when there is literally, nothing wrong with my existing machine.
Apple, please ensure Lion will be available for Intel Core Duo machines, we are not that old! The closed architecture approach produces quality hardware. 4 years is a toddler perhaps teenager when it comes to apple hardware and technology. I predict I have at least 3-4 more years left in my current MBP 2007 machine.
Much Love, Apple!

I updated my iPhone 5s to the new iOS 7.1 and now I have a little icon that I have no idea what it is it up in the same corner as my battery

I updated my iPhone 5s to the new iOS 7.1 and now I have a little icon that I have no idea what it is it up in the same corner as my battery

Maybe you could describe what the icon looks like?

When I go to update software, I get a box that says there is an update with a smaller box over it that says there are no available updates. It did not used to do this.

When I go to have my mac update software it is now having a box that says there is an update with a smaller box over it that says no up date available. You cannot get to the update to click on it to proceed. Why is it doing this and how can I get it to stop?

If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

How come the same apps that are available for my iPhone and my iPad are not the same as the apps in the app store on my mac

I want some of the same apps available on my iphone and ipad2 to be available on my macbook pro app store and to be able to link them through icloud. Is this not possible? If not, why not?

The Mac uses Mac OS X and iDevices use iOS. These are two different operating systems and the apps must be written for each operating system specifically, even when the apps go by the same name, such as the iWork apps, they are two ifferent versions of the same app for the two different platforms.
So, as an example, Safari has been written for three different operating systems, Mac OS X, iOS and Windows. And the Safari apps, as similar as they are visually, are not interchangeable for the different platforms.

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Currently I have two iPads connected to the same Apple ID and one connected to Game Center. I want to connect the second iPad to Game Center so that I do not lose my progress on apps like Clash of Clans.

Currently I have two iPads connected to the same apple iPad. One is connected to game center(iPad air) one the other(iPad 2) is not connected to Game Center. How can I connect the iPad 2 Clash of Clan progress to game center when I already have another clash from iPad air connected?

You cannot transfer content between two accounts. The sooner you make the conversion, the better. Just pick the new one and start using it(buying music etc).
*A lot of people open new accounts when their email changes or they have a new email. You can just access your apple id account and change the primary email that you use to log in along with other details.

Can two Apple IDs be linked so that they can share data? My iMac and iPad have the same Apple ID and sync contacts, bookmarks, etc. My wife's iPad has a different Apple ID. Can it be linked somehow to mine to share contacts etc?

Can two Apple IDs be linked so that they can share data? My iMac and iPad have the same Apple ID and sync contacts, bookmarks, etc. My wife's iPad has a different Apple ID. Can it be linked somehow to mine to share contacts etc?

No. You cannot link your contacts to hers. However, you can use Home Sharing to share the information:
Understanding Home Sharing
iOS- Setting up Home Sharing on your iOS device
Setting up Home Sharing for Apple TV (2nd & 3rd generation)
iTunes- Setting up Home Sharing on your computer

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope at the same time,
I know this can be done but I have forgotten how

Don't use any full screen options for any app that has them
Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Is it possible that Exchange UM could be configure with two call managers over the same sip?

Similar Messages

Maybe you are looking for