Is it possible that vi form will remain contantly on screen even if I'm calling other vi's from testend test sequenc?

I'm using testend 3.1 & labview
7.1. For testing my UUT I'm using  RS232 comunication. I want to
create a form using labview that will show all traffic via the rs232
port.
The problem is that the form is disappeared when I'm calling other vi from testend.

Hi ofer_o,
You could use the "Labview Utility/Run VI Asynchronously" Step to call your RS-232 vi.
See attached.
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd
Attachments:
cpr1.zip ‏19 KB

Similar Messages

  • Is it possible that Diablo 3 will be able to buy in App Store??? :D

    is it possible that Diablo 3 will be able to buy in App Store???

    HI ...
    We have no way of knowing which apps will be available in the future at the App Store but what you can do is try asking at their site >  http://us.blizzard.com/diablo3/community/

  • My iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if you leave it for a night the icon will remain on the screen but there will be zero percent. I tried five different charges and plugs

    my iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if I leave it for a night on charge the charge icon will remain on the screen but there will be zero percent of battery. I tried five different charges and plugs [ one in the apple store], same result. Any suggestions please?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Why i can't make a normal video call over my cellular operator using by iphone 4s ????!!!! is it possible that if my mobile is iphone so i can not contact (Video Call - or Send Files over Bluetooth ) people do not have iphone ??????!!!!!!!!!

    why i can't make a normal video call over my cellular operator using by iphone 4s ????!!!!
    is it possible that if my mobile is iphone so i can not contact (Video Call - or Send Files over Bluetooth ) people do not have iphone ??????!!!!!!!!!
    i'm still looking for solution, but if i there is no solution so i will throw My Own iPhone 4S in the nearest Trash.
    (I had got a big problem and thanks for Nokia saved me. and if i don't care about apple products i will never send to you this, so kindly find solution or people in middle east will stop using iphone)

    No clue why you cannot make video calls over your cellular operator... have you tried contacting them?
    If you're referring to FaceTime, it is currently limited to Wi-Fi only.
    Sending files via Bluetooth is not a supported feature of the iPhone or iOS.  A simple search of the web or these forums would have made that abundantly clear.
    Threatening to throw away valuable items in these forums only serves to make you look less than intelligent.  No one here is an Apple employee, we are all users like yourself.  As such, we could care less what you do.  If you choose to be stupid, that's up to you.
    Educate yourself and stop whining.

  • My ipod touch 5 is frozen on the lockscreen and i cant do anything except restart it and that doesnt hekp. will getting a new screen help? or is there another, less exspensive way? also, it is not connected to wifi.

    I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
    its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
    please help.
    will getting a new screen help? or is there an easier, less expensive way?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • How do I customize the "Navigation Tool Bar" by adding the print ICON so that the ICON will remain when I close the browser?

    I have tried SEVERAL times to customize the "Navigation Tool Bar" by adding the print ICON. Every time I do this it works until I close the browser then I have to re-add the ICON the next time I open the browser. How do I make the ICON stay from session to session?

    See [[toolbar keeps resetting]].

  • Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

    for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

    For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
    A couple of thoughts:
    (1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
    (2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
    (3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
    In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
    (4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

  • How is it possible that so many people complain about the echo sounds during their phone calls, and that there is no reaction or sollution for this problem ???

    so many people complain about echo sounds during their phone calls , and Apple has no solution for this PROBLEM.???????
    I have an IPHONE 5, but I think if no solution is given by Apple, this one is the last iphone i bougth.

    My experience with iOS7 crashing seems to be tied to bluetooth and when I activate the keyboard in relationship to having a text box on the screen.
    Apple rarely acknowledges an issue, once they fix it, they just quietly bundle it into an update and it goes away.
    Issues can also be very difficult to track down given the number of iPads out there (millions) and I doubt (excepting school or business set up ones) that two iPads are identical. Issues can be hard to track down when the common denominator is hard to determine.

  • Is it possible to disable all funktions in the loocking screen, even turn off button (also for security reasons if lost cannot be turned of until code entered or battery low....)?

    Hello, is it possible to turn of all functions in the locking screen? even the turn off function (also for security reasons / so that it cant be turned of while using find your iphone?)

    Mav-erik wrote:
    Yes of course, i know... havn`t lost it but however makes it harder to steal (get bettery out of it or find an area with no cellular connection which are well developed here isnt that easy as just to turn  off the device).
    It only makes it marginally harder to steal. There are many ways to defeat Find my iPhone; turning it off is only one of them. Others:
    Remove the SIM
    Wrap in aluminum foil
    Drop in a shoplifter's bag or backpack that is metal lined
    Run the battery down
    Connect to a computer and restore the phone
    Requiring a passcode to turn the phone off would also make the millions of users whose phone was not stolen very annoyed that they can't easily turn off their phone.

  • Is it possible that iMac corrupts connected external hdd-s drive via USB?

    Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
    First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
    Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
    Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
    Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
    and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
    I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
    Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
    Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
    About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
    Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
    I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
    strange.
    if anybody has a clue?
    update 1:
    i found this post also:
    https://discussions.apple.com/message/15905481#15905481
    I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • Java will remain free?

    Is there any way for me to know that the J2SDK will remain free and available for download and development?
    Java is a great languaje, and i hope it will remain free but i'm afraid that SUN all of the sudden decides to charge for java. Like what Red Hat did with it's 9.0+ distributions. At first Red Hat was free for download and use, and then they just decided to forget about the GNU and charge for Red Hat Linux!.
    Can anyone tell me if SUN has an agreement with the community where they guaratee that java will always be free. Like Debian's Social Contract???
    Thanks.

    No one can ever guarantee that anything will be free
    for ever. But it's very hard to for a company to get
    developers to pay for a programming language. It's
    much easier to charge for development tools, licensing
    of technologies etc.
    /Kajthat will be news to the likes of Borland, Symantec (no more), Intel and others who for years now have sold compilers (as well as the associated tools, documentation and libraries).
    The prevalence of free compilers does indeed make it harder, but people and companies are still willing to pay for quality.
    For example Intel's compilers sell because they yield exceptional performance, Borland for added value of the supplied libraries and editors.
    Selling just the JDK as it now stands would probably not be a good move (for revenue) as users would just stick with the last free version but bundle it with a world class IDE and documentation beyond what comes with the JDK now (I'm so happy we can use that acronym again without feeling slightly guilty) and it might well sell.

  • Calling discoverer 3.1 from forms

    I want to invoke a .dis file from Forms 6i.
    I have discoverer 3.1
    regards
    A.Panico
    null

    Are we talking web or C/S ?
    In C/S discoverer has a command line interface that you can use to pass parameters such as workbook name and call it with host from Forms.
    On the Web you can call the workbook with URL and parameters by using web.show_document in forms.

  • Calling Discoverer 4i workbook from Forms

    How to call a Discoverer 4i workbook (saved in the database) via Forms?
    Best regards
    Honorio Jr

    Are we talking web or C/S ?
    In C/S discoverer has a command line interface that you can use to pass parameters such as workbook name and call it with host from Forms.
    On the Web you can call the workbook with URL and parameters by using web.show_document in forms.

  • Can it be possible that a user insert data by a form and then create a PFD?

    Can it be possible that a user insert data by a form, then store the data in the Data Base and finally create a PFD?
    If this is possible with BI Publisher, what do i have to do to link the form with the BIPublisher interface?
    Regards

    Hi
    If you just have a PDF form and do not need to pre populate data then all you need do is:
    1. Add a submit button to the PDF - you can use the full Adobe product or a BIP API
    2. Load the PDF as a template with a dummy data source.
    The user can then run the "report" as usual. When they have completed the form they can hit the Sumit button on the form. Adobe will then scrape the data out of the form in an XML format and post it to the URL you added. At the other end of the URL you need a servlet to accept and process the XML data.
    If you need to prepopulate the form you can attach a datasource to the PDF template but ensure the fields are preserved after running the form for the user through the config options.
    BIP does have APIs to populate drop lists, etc but these are not exposed thru through the BIP UI.
    I'll try and write this up for the blog and OTN soon
    Regards
    Tim

  • I am suddenly unable to receive calls on my iPhone 4S.  Is it possible that the age of the phone will affect its ability to receive calls? HELP!

    I am suddenly unable to receive calls on my iPhone 4S. 
    I have spent 2 hour-long sessions with technical support and although they were very nice, it is still not fixed.
    When I try to call the phone from a land line, it doesn't ring AND it doesn't recognize that a call is coming in (no missed call) BUT if I leave a message, it records it.
    Is it possible that the age of the phone will affect its ability to receive calls?
    HELP!

        MarketingMary,
    I am truly sorry to hear that your are unable to receive calls on your device. Thank you tbo27 for providing great troubleshooting steps. Making sure call forwarding is not active by dial *73 is great. Have you already reset network settings also? http://vz.to/RTz70g Are you able to make calls fine? Make sure Do not Disturb is not active. Settings>Do Not Disturb
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Error while calling webservice(in XI) from XML spy

    Hi, We have created the webservice in XI and generated/exported WSDL file. We have imported WSDL file to XML Spy and tried to send the SOAP Request, but we are facing the following error: <?xml version="1.0"?> <!-- see the documentation --> <SOAP:Env

  • Custom Namespace Not Appearing in SICF

    Hi Team, I have created a custom namespace(XYZ), by using this namespace i have created my own WDA applications it worked in development, but when i try to move this applications to QA system, namespace got transfered and applications also available

  • I cannot access previously purchased iTunes files.

    Hello, I purchased iTunes files about a year ago (that's when I began). That was my first mistake, seeing as how you can never do anything with them besides play them on iTunes. However that is not my point. After a while I stopped purchasing iTunes

  • Help regarding SGOSDS function group (attaching Notes and all)

    Hi All, we have a requirement where in BSP page we have to attach Notes and also some URLs to one particualr service ticket at the time of creation of that service ticket in BSP. now user again wants to look at that created note and attached URLs. In

  • Cap5 starts very slowly

    Hello all! I have a very irritating problem when I (try) to open Captivate 5. At the moment it takes more than 10 minutes before I see the welcome screen and again some minutes before I can open or start a project. At 1 of 3 times it doesn't open at