Is it possible to A/B video tracks when coming straight from Premiere?

I've got a two-camera project in Premiere where the cameras didn't have the same white balance, so I want to match one to the other: one of them's good, the other was too cold. If I do a "Direct link to Adobe Speedgrade" from Premiere, I can't see any way of choosing which track I'm working with - in Premiere I'd just toggle the top track's visibility icon on or off to compare the two, but this is greyed out in SG. Do I need to create a single-track edit in Premiere first, using clips from both cameras on one timeline, and then work in SG with that?
Hardware: Windows 7 x64, 32GB RAM, nVidia Quadro 5010M, twin SSDs
Software: Premiere CC (7.2.1), Speedgrade CC (7.2x34)

Please refer to this post:
http://forums.adobe.com/message/6215927

Similar Messages

  • Is it possible to make a video preview and export it from edge animate?

    is it possible to make a video preview and export it from edge animate?

    Hi Johan,
    If you are looking to export video through Edge Animate.
    Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
    Regards,
    Devendra

  • Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    Is it possible to customize print sizes (8x8) when ordering prints from Apple?

    No.
    Here are the available sizes:
    http://www.apple.com/ilife/print-products.html#prints

  • Is it still possible to remove pauses between tracks when ripping a CD?

    In earlier versions of iTunes, it was possible to remove pauses between tracks. Many classical CDs have long sections subdivided into separate tracks, yet those sections are meant to be heard without pauses. When a CD with those separate tracks gets ripped, there is a brief pause before the next track starts. Is it still possible to remove those pauses?

    Oops. I found the answer to this question after digging for about an hour.
    Yes, it still can rip without pauses.
    Now my issue is how to join (without pauses) music that ends on one CD and continues (without pauses) onto a second CD.
    Any know of any software that does that with MP3s?

  • Webcam Video pauses when recording sound from microphone

    I have a strange problem which i am encountering when recording and playing back webcam video.
    I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
    I am using AS 3.0, FMS 3.5 and flash CS 5.5
    When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
    I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
    I tried using the flvplayback component and even their it pauses.
    Any help is appreciated.

    Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
    However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

  • Is it possible to retain multiple audio tracks when exporting?

    While ripping my DVD collection, I've wanted to add a purchased RiffTrax (see www.riftrax.com) to the movie as another audio track. I've been successful, but it took the following steps:
    1. Encode the movie using Handbrake, open the resulting m4v file in Quicktime Pro
    2. Also in Quicktime Pro, open the Rifftrax aac file I created and add it as another audio track in the m4v
    3. Save the m4v as a Quicktime mov file
    4. Use Handbrake again to encode the mov file into an m4v file, including my added audio track
    The reason I have to do step 4 is because if I were to export an m4v file directly from Quicktime Pro, it would compress all of the audio tracks into a single audio track. It would save a lot of time if Quicktime could export multiple audio tracks, at least when exporting to formats that can handle them. Does anyone know if this is possible?
    BTW, if anyone wants more details into how I create the RiffTrax aac, just ask.
    - Jake

    I've answered my own question, it was a lot easier than I thought. After the first encoding by Handbrake, there's really no difference between calling it a mov file or m4v file. I can change the file extension at will and there's no need to do an export that mashes the audio tracks. It's only AppleTV that needs to see the m4v file extension, Quicktime and iTunes doesn't seem to care one way or the other.
    Thanks for letting me think out loud.
    Jake

  • Possible to play mp4 video uploaded to CC storage from my ipad?

    Uploaded mp4 video to my cloud storage for a client to review on ipad. Can't seem to play the video or download it though the ipad. Any ideas?

    I don't know which one to suggest, but I think you need a program forum for whatever Adobe apps you have on your ipad... maybe the digital editions forum or the touch apps forum?
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Video pauses when clicking out of premiere? can i get it to continue playing?

    Hi all....
    I am watching a video taken from a helicopter and need to track this in google earth.... everytime i click out of the adobe premiere window.. ie. in to google earth, the video pauses in premiere... i really want this video to continue running whilst i navigate in google earth... is there a way i can stop adobe pausing?
    thanks in advance!!
    Neil

    No. Just use Google Earth on another computer next to the PR machine.

  • Is it possible to change the dimension order when extracting data from HFM?

    Hello,
    When accessing Consolidation/Extract/Data is it possible to change the dimension order of the extract rather than extracting the standard order?
    I can see you can change the dimension order visually by going to "Reorder dimensions" but this does not carry through to the actual extract.
    If its not possible using this method is there another method? Trying to avoid using smartview for this purpose.
    Many thanks and kind regards,
    Rich

    Hi,
    No, it is not possible to change the order type.
    -Paul

  • Video flickering when published live from camera

    I am getting flickered image when published from live camera.
    Settings done for view of flash player in html page and settings done before publishing in actionscript is as follows:
    setting in HTML:
    size of flash player object in html page is 240*180
    setting in actionscript:
    stage size is 216*162
    size of video component is 216*162
    camera.setMode varies as:- camera.setMode(160,120,6) //////////////in this case there is a flickering
                                                 camera.setMode(320,240,8) //////////////in this case there is a flickering
                                                 camera.setMode(640,480,2) //////////////in this case there is no flickering.
    Now what I have tried to resolve the issue:
    1) changed the size in html to 320*240
    2) set the stage size to 320*240
    3) size of video component to 320*240
    I have tried all permutations for the above three scenario but still not got the solution.
    I have also tried to make the size of video component as per the camera height and width respectively, with/ without altering the size of stage, still no success.
    Please help.
    Thanks in advance
    Nitesh

    first thing to try is to upgrade your video driver.  if the issue still persists, please enter a bug here: https://bugbase.adobe.com/index.cfm
    please attach your dxdiag info in the bug - http://kb2.adobe.com/cps/839/cpsid_83952.html#main_For_Windows_users

  • Flickering video in timeline and export from premiere

    I called tech support, and they said on Friday (07.18.2014) that they would call me back monday, and then never heard back from them.
    Anyway, I need to downgrade from Adobe CC2014 Premiere back to the previous version of Premiere, and I have to do it immediately. The upgrade from CC to CC2014 has resulted in flickering video in the timeline and the final render, I can't figure out what it is except to say that it didn't do it before I upgraded.
    If anyone can tell me how to get back to a lower, more stable version, I'd appreciate it. I don't want to use a crack, and I am paying for the service - I need this issue to be addressed right away, or to get back to a stable version while I wait for them to make CC 2014 more stable. If my only choice is to use a crack, someone just say so, and when the upgrade becomes more stable, I'll go back to it.

    So, I was never actually provided with a fix for this, just a workaround that doesn't really satisfy outside of getting a clean render. They had me change my sequence settings to 25 FPS (???), which I would never have thought to try on my own, since I don't shoot, edit, or output in that setting. That said, if I edit in a sequence that is 25 FPS, but export at the 23.976 that I shoot in, I get a clean render. This clean render, however, has only happened once, and I have no idea if it's going to be consistent. The reason that this works was never made completely clear to me.
    That said, I'm sticking with Premiere CC for now, until Adobe can fix the software to work the way it's supposed to. I honestly don't expect this to be fixed, so it may be next year before I update. I also received bad advice from the person running the twitter account (they told me I could "save as" to get a file out of CC 2014 that would work in CC), and I lost about three days of work trying to get a flicker-less render (1.5 days on trying to fix it myself, and another almost 1.5 days total trying to get results out of tech support, who said they would call back on Monday, but never did).
    No rant here, those are the facts. Buyer beware on upgrading...make sure to have a backup installer for a previous version if you feel like you want to try upgrading.
    Lastly, the link posted by John Smith doesn't work for Premiere, although the link I posted in response to him, does.

  • Missing audio tracks when importing raw from my PMW-350

    I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

    Works fine for me.
    Win 7 CS6.03.
    Did it work before?

  • Multiple Video Tracks

    With Imovie HD, just wanted to know if it was possible to have multiple video tracks and how? Also I cant seem to find the 'project library' or any 'advanced' tool section...
    Cheers!!

    Hi
    No there are no "Multiple video tracks" in iMovie any version.
    If it is the effect "Picture in Picture" Then You can add plug-ins from
    third part developer that can give this.
    Stupendous software http://www.stupendous-software.com
    GeeThree http://www.geethree.com
    cf/x. http://www.imovieplugins.com
    Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
    http://www.imovieplugins.com/fxhome.html
    But if it is real "Multiple video tracks" You need cheapest and "best" solution
    is FinalCut Express.
    If it is so that You shoot/record with multiple Cameras/Simultanious AND Continous
    Then You would gain greatly on FinalCut Pro (Studio 2 bundle).
    To work with this multi-clip function is Great.
    Yours Bengt W

  • 2 video tracks?

    Is there any way possible to put 2 video tracks and one audio track in imovie HD? OR is there any easy way to edit between two separate videos footage. I've been pulling my hair out for 3 days now.. and I can't get final cut express to import my footage, or I'd be using that.
    PLEASE HELP, i'm on a deadline!
    thanks!
    cyndi

    Nope. iMovie is a consumer program that only has one video track. So you can't do overlays and some other Hollywood type video effects. But you can still do quite a lot.
    As work arounds, you could move one separate set of video clips farther down the time line and edit it there. Or, you could open a second iMovie project for the second video set, and then drag it into the initial project after you have edited it.
    You also might consider posting on the FCE board to find out why FCE won't import your footage. That's the main issue.
    Good luck with this.

  • Random Video track selection

    I have an idea to create a DVD that works like the interactive board game/DVD "Scene-It"
    Basically what I am wondering is, whether there is a way to select a random video track when you click on a menu button.
    For example let's say that I have 5 video tracks, when someone clicks on a button I would like one of those 5 tracks to appear randomly. This way, each time someone clicks, a different video track will be played.
    I'm not sure whether this is possible using DVDSP, but wanted to ask the people would know more about it than me.

    Yes, you can do random play
    Pretty sure there is an example in the reference manual
    Also this is a subject that comes up often here, so do a quick search for "Random Play" without the quotes
    here is a good one
    http://discussions.apple.com/thread.jspa?messageID=1892961&#1892961

Maybe you are looking for