Is it possible to access the logged in google id in an android device from air?

Hello,
I'd like to get to know the username/mail from the user that is going to use my air application, I need to restrict some content depending on the user's privileges is it possible from an air application or should I go native? As far as I know the android sdk has an accountManager class. Any ideas? Been looking for it in forums but so far not even 1 result.
Thanks!

I found this, I hope it is useful:
http://www.adobe.com/devnet/air/articles/android-licensing-native-extensions.html

Similar Messages

  • Is it possible to access the Public Folders in Exchange 2013 during a migration from Exchange 2007 to verify the files are there?

    This is a migration from Exchange 2007 to Exchange 2013.  We're in the middle of migrating the Public Folders.  Is it possible to configure a database to point to the Exchange 2013 public folders so I can verify the data before the final cut?
     If so what are the steps to do that?  Thanks in advance.

    To my knowledge no.  It's an all or nothing thing with public folders.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Is it possible to access the http web interface over the fa1 management interface?

    Hello All,
        I am remotely connected into a Cat 4500 + Supervisor V module via console cable and point to point connection from laptop to fa1 management interface on SupV.  SupV module is running IOS 15.0(2)SG8.
        I am not able to physically change the patch cable from fa1 management interface to gi2/3 or any other switch port for a couple days and would like to see if it is possible to access the http server through this fa1 port since I am working remotely.  I can ping the laptop from fa1 and tftp ok but cannot access the http/https server.  Is this even possible without connecting the laptop into a regular switch port like gi 2/3 gi 2/4 etc..?  The reason I ask is I would like to use Cisco Networking Assistant gui for some things but need access to https server first over the fa1 link.
    Any suggestions would be much appreciated.
    Thanks!
    -S

    Here is the ACL list.  I have not made any entries into this list and all of these are default at this time.  Do I need to make an explicit allow ACL for http?
    Thanks!
    -S
    #show access-list
    Extended IP access list system-cpp-all-routers-on-subnet
        10 permit ip any host 224.0.0.2
    Extended IP access list system-cpp-all-systems-on-subnet
        10 permit ip any host 224.0.0.1
    Extended IP access list system-cpp-dhcp-cs
        10 permit udp any eq bootpc any eq bootps
    Extended IP access list system-cpp-dhcp-sc
        10 permit udp any eq bootps any eq bootpc
    Extended IP access list system-cpp-dhcp-ss
        10 permit udp any eq bootps any eq bootps
    Extended IP access list system-cpp-energywise-disc
        10 permit udp any eq any eq 0
    Extended IP access list system-cpp-hsrpv2
        10 permit udp any host 224.0.0.102
    Extended IP access list system-cpp-igmp
        10 permit igmp any 224.0.0.0 31.255.255.255
    Extended IP access list system-cpp-ip-mcast-linklocal
        10 permit ip any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ospf
        10 permit ospf any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-pim
        10 permit pim any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ripv2
        10 permit ip any host 224.0.0.9
    Extended MAC access list system-cpp-bpdu-range
        permit any 0180.c200.0000 0000.0000.000c
    Extended MAC access list system-cpp-cdp
        permit any host 0100.0ccc.cccc
    Extended MAC access list system-cpp-cgmp
        permit any host 0100.0cdd.dddd
    Extended MAC access list system-cpp-dot1x
        permit any host 0180.c200.0003
    Extended MAC access list system-cpp-lldp
        permit any host 0180.c200.000e
    Extended MAC access list system-cpp-mcast-cfm
        permit any 0180.c200.0030 0000.0000.000f
    Extended MAC access list system-cpp-pppoe-disc
        permit any any protocol-family pppoe-disc
    Extended MAC access list system-cpp-sstp
        permit any host 0100.0ccc.cccd
    Extended MAC access list system-cpp-ucast-cfm
        permit any host 000d.6558.d5fd

  • Is it possible to route the log generated frm a FNDLOAD cmd to usr def file

    Hi,
    Is it possible to route the log generated from a FNDLOAD command to user defined file??
    Thanks in advance,
    Kiran

    Kiran,
    I think it is not possible, the log file will be generated in the directory where you run FNDLOAD.
    Regards,
    Hussein

  • Access the Log of appropriation days after

    Dear Experts.
    I want access the log of KO8G/KO88.But it will be done days after. Then I went in the SLG00, and did to try by user and transaction CODE KO8G. I don´t have sucess.
    Then continuing my search, I found the SLG00. Here i´ve that active the object and subobject for this process(KO88/KO8G).
    But I don´t konw that OBJECT to reference THE INDIVIDUAL APROPRIATION(KO88) and COLETIVE APPROPRIATION(KO8G).
    Someone Know does how to do it?
    Thanks a lot.

    Thank You.
    But I found the Object e Subobject throught of table Vbal. In this may case are COAC and KOAO.
    Anyway, thank you.

  • Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?

    Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?
    Thanks.
    Steve Greenberg

    No, Lightroom catalogs cannot be on a networked (shared) drive, and they do not support simultaneous multi-user access

  • Is it possible to check the log of IP accounts tha...

    I would like to check if certain people have been hacking into my skype and reading my conversations, if not the IP address then would it be possible to check the general location of people logging into your skype?

    No Alvin I'm sorry but you can't access a list of used passwords for an Apple ID (or any account for that matter) as it would be consider a security flaw

  • Is it possible to have the log in english and the out in an other langage

    Hi,
    I wonder if it is possible to always have the log of all submitted concurrent programms in english (for the production center - only english speaking- in case of errors) and the output for the end user in is own langage (polish, french for example). Of course, polish, french langage would have been installed.
    It is also supposed that the informations in the log are not expected to be useful for the end user (I hope it is really the case)..
    Thanks in advance for your answers.
    Pierre from Paris.

    There is no such feature avilable in EBS standard functionality but I think this can be achieved through custom programs...
    Basically during your custon pl/sql code, you need to run an alter session before generating logfile and alter session for NLS again before writing to output file...
    I have not tried this yet but i hope this might work.
    Thanks
    Yogi

  • How can we access the logged in SSO user email address in websheet app

    Is there any way where we can find the email address of the logged in SSO user, do we have any variables which we can use and if so how can we use in our websheet application?
    could any please guide me on this
    thanks
    srinivas p.

    You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

  • Is it possible to resize the log and capture window?

    Hi,
    Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps.
    For a good overview of what I'm capturing at the moment, I would love to have a bigger capture window. For all I know, FC pro doesn't support the resizing of the log and capture window. Anyone an idea on how to solve this?
    Thank you.

    In my case, the capture window is adjustable if I am capturing SD (DVCAM) video. I can also use the scopes in this case. (Good if you are recording to disk, or using a laptop for monitoring.)
    However, both features (adjustable capture window and scopes) are not available if capturing HD (HDV in my case) video.
    Message was edited by: amarasme

  • Is it possible to make the log pop up of errors/warnings appear for longer?

    Dear all
    The answer to this question may have already been posted but I could not locate it when searching.
    I am running SQL Developer 1.5.1 and I have set up the display so that the log is minimised. When I debug or compile any packages the log of error messages/warnings pops up. However this does not stay on screen long enough for me to be able to read it and only 1 in 4 times do I get to the log window quick enough, in order to click on it to keep it open. Is there away of making the log pop up until I minimise it or at least stay on screen for longer, so that I can reach it in time? I estimate it is currently staying on screen for less than 1 second.
    I don't want the log to be displayed all the time because it takes up valuable space, which I find useful when writing my code. It gets in the way even more when I am using the SQL statement window/script output window.
    Kind regards
    Tim

    Thank you K. for your reply.
    After all these months of using SQL developer. it never registered with me that hovering over the tab brings it up. I must have brought it up before now but I don't remember doing so if I did.
    Problem resolved.
    Kind regards
    Tim

  • How and where to access the logs in OpenUI5

    If I am using logging in OpenUI5 with
    jQuery.sap.log.info debug etc then where can see these logs when I run web page ,it does not come on console.

    I expect it's due to the logging level, the default setting for the productive minified javascript is Error, so will only display the FATAL or ERROR messages in the console.
    If you switch to use the -dbg version the ldefault logging level is DEBUG, so should display your logging.
    https://openui5.hana.ondemand.com/docs/guide/Configuration.html
    logLevel
    0|1|2|3|4|5|6| NONE|FATAL|ERROR| WARNING|INFO|DEBUG|ALL
    ERROR
    Sets the log level to the given value. For minified (productive) sources, the default level is ERROR, for debug sources it is DEBUG. At runtime, the log level can be modified with  jQuery.sap.log.setLevel
    Regards,
    Jason

  • Can't access the Logging Items section of the Log and Transfer window.

    Yesterday I was able to select and ingest clips and rename clips from my Canon Vixia SFH11 camcorder using the logging items section of the log and transfer window in FCP 7. Today, that section of the L&T window is gone! and every time I try and change a clip name or rename a clip it either ignores the change or it tries to save the new clip with a higher numbered name (ie. Clip #102, Clip # 103).
    I know if must be a setting that I am missing or a procedure I skipped.
    I want my logging items section back!
    I've restarted and tried rebooting to no avail. Anybody have a clue?

    Hi -
    If you are missing both panes of the Log and Transfer window, you may have swiped the dividing bar over to the side to display one pane only.
    Place your cursor over the bar on the side (you'll see the cursor switch to a reposition indicator)
    !http://www.spotsbeforeyoureyes.com/L%26TPreWindow2.jpg!
    and pull it back to the middle:
    !http://www.spotsbeforeyoureyes.com/L%26TPreWindow1.jpg!
    Hope this helps.

  • Accessing the minus sign... Euclid Symbol Bold from InDesign

    I am working on a project for a client. I am using InDesign CC. Text is coming from Word on Windows.
    They are using MathType for equations and expressions. I want to be able to use the same minus sign in other places, but am getting an en dash.
    The Euclid Symbol minus sign has rounded ends, like the +, =, <, >, etc. The en dash has squared ends.
    I have no issues with the other operator symbols... just the minus sign.
    How do I get access to the minus sign?
    Currently using the TTF version of Euclid Symbol.
    Thanks

    Select Glyphs from the Type menu and see if there is a glyph you want in that font. If not, you may need a different font (possibly an OT Pro version).
    Oh, and there's also this.

  • Hi, I use a PC @ work and a MAC @ home to ger my mail, but on the road I use Gmail on an android device which use to work before the move to Icloud, I used the same settings that I used with the PC BROWSER  IN THE SETUP  for Gmail and keepgetting errors ?

    Hi, I'm trying to use Gmail to retrive my mail form Icloud, I use a mac at home and a pc at work and an android device on the road,  I have tried setting gmail the way I sign on with Chrome but I keep getting errors... what do I have to do differently....Fred

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore
    See also:
    * http://kb.mozillazine.org/Firefox_crashes
    * [[Firefox crashes]]

Maybe you are looking for