Is it possible to access user_views of a schema in remote db?

DB Version: 10gR2
The number of columns in SCOTT.EMP in MHPROD database and SCOTT.EMP in NHTEST database is different.
I was trying to find what these extra columns are. So i created a db link to SCOTT called NHTEST.
SQL> show user
USER is "SCOTT"
SQL> select name from v$database;
NAME
MHPROD
select column_name from user_Tab_cols where table_name='EMP'
and column_name not in
(select column_name from SCOTT.user_Tab_cols@NHTEST where table_name='EMP')When i try to execute this, i get the error
ERROR at line 3:
ORA-00942: table or view does not exist
ORA-02063: preceding line from NHTESTIs it possible to access user_views or DB_views from a schema in remote db?
Edited by: N.Page on Jun 9, 2010 6:57 AM

Assuiming NHTEST is a database link to the remote database connecting with SCOTT, use user_Tab_cols@NHTESTNicolas.

Similar Messages

  • Is it possible to access Pages from an web application running in Safari in i-Pad?

    Is it possible to access Pages application from an web application running on safari browser in iPad ?

    Since you control the application AND the plugin - you can define ANY method of communication you want.  Shared files, shared memory, IPC, named pipes, etc.

  • Is is possible to access channels from a CAN database in labview with NI USB 8473s

    Hello,
    I would like to know whether is possible to access a CAN database, which is uploaded through MAX, in labview.
    More specifically, I have uploaded my CAN database in MAX and I want to have access to each specific channel in labview.
    i.e according to picture, I would like to have access  to n_Motor_InsRpm channel of E1_L0_1 (motor speed) in Labview, so I can set and transmit a speed value through CAN. Could that be possible with NI USB 8473 s? If yes, is there any simple example in Labview ?
    Thanks for your Help
    Charis
    Solved!
    Go to Solution.
    Attachments:
    CANdb.jpg ‏11 KB

    There are several ways to get database information without needing hardware. Here is one I did a while ago.
    https://decibel.ni.com/content/docs/DOC-39793
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • No Longer Possible to Access iCloud Mail on Third Party Mac

    Something has changed recently. It is no longer possible to access iCloud mail on a third party mac via web browser
    This afternoon, I tried to do so on my daughter's iMac - and the system wanted me to set up iCloud rather than letting me access Mail (or any other iCloud services for that matter) instead. Tried different browsers, change of login account on the computer. All to no avail. Have to set up iCloud on the computer. Which means either logging my daughter out, or creating a whole new identity for the purpose. This entirely defeats the notion of the simple webmail interface - and indeed makes Pages, Calendar, etc inaccessible unless on your own computer, or one that you have used to set up an iCloud account. Not something that you want to do in an internet cafe or an airport lounge.
    Two sets of Chat Support sessions later, with the problem being hinted to be probably due to "my daughter's computer (!!???)", no satisfaction
    I am now in the airport, trying to still access my iCloud mail through a web browser. Same nonsense about setting up iCloud before I can access my iCloud mail via the web through a browser.
    Apple, this was one of the advantages of iCloud that I, as a regular traveller, have found useful in the past. Today I have wasted well over an hour on something that is clearly an error in the logic of how people will be using iCloud - possibly a "feature" of Mavericks?
    Please bring back simple and straightforward access to iCloud mail via web browser, so that I can once again access my mail from any third party computer.
    Thanks
    Nic

    Excellent, well done. I have to say that talktalk were useless, they repeatedly sent me instructions for setting up an emil account and did not seem able to understand that it was the login that would not work. Thank you.

  • I'd like to know if it's possible to access an older version of a web page in Firefox.

    I'm wondering if it's possible to access an older version of a webpage I've since made changes to -- the site is through Livejournal.com -- in order to see the information that was on the older page. I'd like to keep it consistent with the new page, but am not sure how to do this. I very stupidly didn't save a copy of the old page!

    If you know where the page is at, I myself don't see any reason why you can't access it.
    The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
    I'd say go ahead and at least try.
    davewdan

  • Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?

    Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?
    Thanks.
    Steve Greenberg

    No, Lightroom catalogs cannot be on a networked (shared) drive, and they do not support simultaneous multi-user access

  • Is it possible to access inbuilt hard disk drive in Apple Airbook

    is it possible to access inbuilt hard disk drive in Apple Airbook

    Kamal666 wrote:
    Yes i would like to access contents, files or etc... on hard drive or inbuild flash drive, Same like Windows my computer hard drives access
    Finder Preferences > General > check "Hard Disks"

  • Is it possible to access a group of (sequentia​l) registers with a single URL?

    I'm testing out datasockets to an A-B RSLinx OPC server. At the moment, it appears as though each register in the PLC has to be accessed with an individual URL. Is it possible to access a group of (sequential) registers with a single URL? I suspect i may have to cluster a bunch of individuals together

    goog,
    For each data member, you will need a unique URL. There is not a way to bundle them into one URL.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Is It possible to access checksum field of LIN frame?

    Hi All,
               I am using LabVIEW 8.2 and PCI 3072 LIN card (GÖPEL electronic GmbH) .
    Is it possible to access checksum field of LIN frame? I have to test one LIN driver - LIN conformance test. So I need to access timing of each byte, value of checksum, sync field etc. Anybody please reply
    Regards
    Preejesh M R

    Hi,
    You should have found some examples along with the Drivers provided in the CD which comes along with the card. If not, you can contact Goepel and they can provide them. Which driver APIs are you using for this device? Is there a function for checksum in the API, if not you can create a logic to read the string and convert it to a number and add all the bits together. My first suggestion,  however is to contact Goepel.
    Thanks, 
    National Instruments
    Applications Engineer

  • Re: Is it possible to accessing regular Thumbdrive...

    Hi All,
    Is it possible to access regular thumbdrive from Nokia HP just as it is acccessing a memory card?
    What happens when a regular USB thumbdrive is attached to a N96 using a convertor cable? Have anyone tried this before?
    Thanks a lot in advance.
    Best Regards,

    It has nothing to do with power supply and everything to do with protocol.
    The phone is designed to behave as an external USB drive when connected in "mass storage" mode. It is what's known as a usb-storage device in this configuration. It is not a computer designed to use a usb-storage device.
    The "converter from memory card to USB port" that you mentioned is more than just an adapter. There's a whole load of electronics in there that convert usb-storage protocol messages received over the USB port into requests sent to the memory card. The phone knows how to process those protocol messages received on its USB connector and use them to retrieve/store data on the card inserted into its card reader. It does not know how to issue those messages on its USB connector in order to access a pen drive.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • WEB reports can it possible to access from out side domein

    Hi, i want  information whether WEB reports can be access from

    Hi all,
    WEB reports can it possible to access from out side domein. If yes please tell me how..

  • Is it possible to access text messages via iCloud?

    Is it possible to access text messages via iCloud?

    No, except to restore an iCloud backup to recover text messages and other data.

  • Is it possible to access the http web interface over the fa1 management interface?

    Hello All,
        I am remotely connected into a Cat 4500 + Supervisor V module via console cable and point to point connection from laptop to fa1 management interface on SupV.  SupV module is running IOS 15.0(2)SG8.
        I am not able to physically change the patch cable from fa1 management interface to gi2/3 or any other switch port for a couple days and would like to see if it is possible to access the http server through this fa1 port since I am working remotely.  I can ping the laptop from fa1 and tftp ok but cannot access the http/https server.  Is this even possible without connecting the laptop into a regular switch port like gi 2/3 gi 2/4 etc..?  The reason I ask is I would like to use Cisco Networking Assistant gui for some things but need access to https server first over the fa1 link.
    Any suggestions would be much appreciated.
    Thanks!
    -S

    Here is the ACL list.  I have not made any entries into this list and all of these are default at this time.  Do I need to make an explicit allow ACL for http?
    Thanks!
    -S
    #show access-list
    Extended IP access list system-cpp-all-routers-on-subnet
        10 permit ip any host 224.0.0.2
    Extended IP access list system-cpp-all-systems-on-subnet
        10 permit ip any host 224.0.0.1
    Extended IP access list system-cpp-dhcp-cs
        10 permit udp any eq bootpc any eq bootps
    Extended IP access list system-cpp-dhcp-sc
        10 permit udp any eq bootps any eq bootpc
    Extended IP access list system-cpp-dhcp-ss
        10 permit udp any eq bootps any eq bootps
    Extended IP access list system-cpp-energywise-disc
        10 permit udp any eq any eq 0
    Extended IP access list system-cpp-hsrpv2
        10 permit udp any host 224.0.0.102
    Extended IP access list system-cpp-igmp
        10 permit igmp any 224.0.0.0 31.255.255.255
    Extended IP access list system-cpp-ip-mcast-linklocal
        10 permit ip any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ospf
        10 permit ospf any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-pim
        10 permit pim any 224.0.0.0 0.0.0.255
    Extended IP access list system-cpp-ripv2
        10 permit ip any host 224.0.0.9
    Extended MAC access list system-cpp-bpdu-range
        permit any 0180.c200.0000 0000.0000.000c
    Extended MAC access list system-cpp-cdp
        permit any host 0100.0ccc.cccc
    Extended MAC access list system-cpp-cgmp
        permit any host 0100.0cdd.dddd
    Extended MAC access list system-cpp-dot1x
        permit any host 0180.c200.0003
    Extended MAC access list system-cpp-lldp
        permit any host 0180.c200.000e
    Extended MAC access list system-cpp-mcast-cfm
        permit any 0180.c200.0030 0000.0000.000f
    Extended MAC access list system-cpp-pppoe-disc
        permit any any protocol-family pppoe-disc
    Extended MAC access list system-cpp-sstp
        permit any host 0100.0ccc.cccd
    Extended MAC access list system-cpp-ucast-cfm
        permit any host 000d.6558.d5fd

  • Is it possible to access task flow parameter in EOImpl.create() method?

    Hi,
    Is it possible to access task flow parameter in EOImpl.create() method? If yes, please let me know how to access.
    FYI..I am having CreateInsert<xxx> activity in the task flow, which I believe calls EOImpl.create() method internally. While creating the entity, I want assign a default value based on task flow parameter.
    Thanks

    One way to pass task flow parameters to the model is during the task flow initialization. For this purpose you can create a prepare() method in your Application Module and call it from the task flow. By setting this method as the default in your task flow, it will be called each time the task flow starts. You can pass to the prepare() method any task flow parameters you wish as function arguments. In the prepare() method, save the task flow parameter values in EO or VO transient variables. These variables will be then accessible in the create() methods.

  • Is it possible to access user account in an air android app ?

    Is it possible to access user account in an air android app in as3 ?
    The only thing I've found on internet is that one has to add to its manifest permissions to acccess account :
    <uses-permission android:name="android.permission.GET_ACCOUNTS" />
    and this documentation for native android coding :
    http://developer.android.com/training/id-auth/identify.html
    thanks for any help.

    There is no API in the AIR runtime to get user's accounts.
    But you may write an ANE to get the same.

Maybe you are looking for

  • Data guard: OMF and directory structure

    hi everybody, i guess this problem is not too complicated, but maybe i´m missing something. assumption: - 10.2.0.4 - data guard with physical standby (primary: node_a, standby: node_b) - primary db_unique_name=primary, standby db_unique_name=standby

  • Flash site not displaying properly in IE and chrome

    Any ideas of what is causing this code not to display properly in IE and chrome as checked on PC. It works on safari <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www

  • Firefox will not load any websites at all

    I have been using Firefox for more than awhile, as IE 10 would not work for me, but a few days ago Firefox stopped working all together. I will click Firefox and all that happens is it loads a New Tab, and it has a blank page with no web address. If

  • I have forgotten the iPod password.

    I have forgotten the iPod password.  How do I start over so I can use it with iTunes?

  • Issue with lofiadm and newfs

    Have anybody faced with an issue, when "newfs" hangs when file system is being created on the "lofiadm" device? Unfortunately, I'm facing it quite often recently and have no idea, why it can occur - from 2 similar attempts, the first succeeds, while