Is it possible to achieve this with Pacman?

I have seen different positives and negatives in each package manager and I found rPath's (Foresight) quite interesting. Is it possible to develop pacman to be able to just download the files that need to be updated when updating an app, instead of downloading the whole package all over again? Sorry to mention this if it's already possible/available/planned.

That would actually be brilliant ... Downloading the whole OOo all over again because of a very minor update is a bit annoying

Similar Messages

  • My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high.  Is it possible to do this with the iPad and OS7?  If so, what setup do I need?

    My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high.  Is it possible to do this with the iPad and OS7?  If so, what setup do I need?  I have a SM58 type mic and-over-the ear headphones.

    This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
    ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
    Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
    If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

  • Adobe Muse CC, Is it possible to achieve this effect?

    Hi everyone, it's me again. Now I was browsing through the internet when I come across these two websites:
    Supernova – WordPress Theme (This is a website theme/template)
    http://airnauts.com/ (This is an actual website)
    So, in the first one, the Wordpress theme, as you can see there is this "Fade-In" text effect, now I managed to achieve the same effect via "Composition Widget" following the instructions in this video:
    " Adobe Muse CC 7.0 Tutorial | Auto-Fading Design Elements - YouTube "
    Now, I managed to "synchronize" the time settings, so that my slideshow pictures fade and when there is a new picture the text fades in, the problem is, it happens just once, what I did basically was:
    I set the auto-fading effect using the: "Hide Initially" feature in the "Composition" Widget (like in the video tutorial) and for the first picture/text I set the time, so that when the page loads it automatically fades in, and that works very fine, my point is, that you can't see the effect again unless you reload the page. In the Supernova theme you can clearly see that the texts fade in as the page loads and as the slide changes, so each time it changes slide there's a new text fading in, and if you go back to the previous slide without reloading the page, it still shows it, as if the auto-fading text was somehow "linked" the the picture itself, so that when that particular picture is shown, the effect of the fade-in text comes up, each time that particular picture is shown.
    I made some research and I found out that there's a program called WordPress and that the "Supernova Theme" is actually a "template" for that program (I might be mistaken though). Now, my question here is, is it possible to achieve the same effect with Muse? Like: "when this image appears then the following fade-in text does"
    And, as for the second link, as you will see, there a very cool scrolling effect that makes the rectangle sort of: "turns around" (it's better if you just see what I'm talking about int he second link)
    Is it possible to do the same with Muse?
    Thank you for your time!

    Hi Chuck--
    I haven't seen a specific example of this yet, but I know it's possible to do in Edge Animate. I think shotdang's example is the same concept, but doesn't take it as far.
    It'd be kind of a similar concept to this, too: http://html.adobe.com/edge/animate/showcase/templates/tabviewer/TabViewer.html
    You could start from here: http://www.edgedocks.com/market/organic-menu-edge-animate
    Then, you'd just need to design your project so that the menu items target the frames you want animated.

  • Is it possible to achieve this effect in Muse?

    The effect is on the menu system at http://blazdesign.com/portfolio/. When you click on a menu item the contents below animate and rearrange. Very slick. Does anyone know how this was achieved? And if there is anyway to achieve this using Muse, perhaps in combination with other CC apps? If not, is there any effect acheivable in Muse that might achieve similar functionality?
    Any advice appreciated. Thanks.

    Hi Chuck--
    I haven't seen a specific example of this yet, but I know it's possible to do in Edge Animate. I think shotdang's example is the same concept, but doesn't take it as far.
    It'd be kind of a similar concept to this, too: http://html.adobe.com/edge/animate/showcase/templates/tabviewer/TabViewer.html
    You could start from here: http://www.edgedocks.com/market/organic-menu-edge-animate
    Then, you'd just need to design your project so that the menu items target the frames you want animated.

  • Is it possible to do this with subtemplates ?

    Please give your valuable suggestion... Thanks in advance !
    We have a requirement in EBS, where there are 4 different Invoice Layouts (RTF Templates) for 4 operating units. We created 4 different templates and attached to the data definition (which is linked to one concurrent program). It works great.
    During runtime, user needs to pick the correct layout and get the correct results.
    BUT, we want to build a logic that a specific layout is defaulted (depending on Operating unit or say, some other XML data element). In other words, Just use/launch a specific template automatically without user choosing from the list of templates.
    So that user doesn't choose wrong template and we can restrict templates based on operating unit.
    There is no easy way I could find to accomplish this.
    I want to use the subtemplate logic, but that doesn't seem to work for this.
    In subtemplates I can only define part of the template logic like header/footer or body part.
    When I put the tags of <?template:Template_Name?> at the very beginning of the layout ,the first character of Header and <?end template?> at the very end of the report, it seems to totally ignore the Header portion.
    Actually, I want to launch a complete RTF template with headers/body/footers by itself.
    The calling (dummy) Template RTF has no formatting at all... Just calls to other templates..
    I want to use one dummy template just to call four other complete templates based on some XML data element (like operating unit).
    Can any guru tell me, if this is possible at all ??

    You can use the same logic we use in Bursting to automatically apply a different template based on some Operating Unit element in the XML message.
    HTH,
    Nilanshu

  • Is it possible to do this with Flash...

    I have this little problem with my blog on MySpace and I'm curious to find out if I can solve it by creating
    a Flash header/game for my blog that will solve it.
    I experience routine cycles where on certain days I will get tons of hits, usually this is just before the night I go out to the club to have fun.  People never, ever comment on my blogs, nor do they subscribe, so I have no way to know who is viewing (spying on) me so regularly and diligently.  This is far beyond annoying.  I've also, in the past, encountered real life problems due to people slandering me from taking things I say way out of context, or simply because they are drama queens who get off on screwing with peoples' lives.
    Now what I want to do is basically take the pyramid with the all-seeing eye from the back of the U.S. one dollar bill, turn it into a big, colorful and interactive work of art with the eye looking around, blinking, staring at the user, emanating, IDK, rage or focus idealized while a marquee then scrolls along the bottom of it telling people that I'm watching those who watch me, or something like that, while in the background recording their friendIDs with a date and time stamp which will then get compiled and forwarded to me on say a weekly basis.
    This will give me peace of mind in knowing who's just browsing, who's friendly and who's doing this to try and hurt me, things I can figure out on my own by checking their profiles and determining whether I am familiar with them or not, and on what terms.
    What do you think, is something like this possible with Flash or would it take Java?

    you can do that with flash.
    you can do a little more and display the user's ip address in your flash header.  and it's possible (with server-side scripting) to display the geographic location of the user based on their ip address.

  • How can I achieve this with less code or faster?

    Hi Folks,
    I have 2 database tables, 'products' and 'products_staging'.
    Every day, the 'products_staging' table is updated with a fresh
    batch of products (which are imported from xml files in a seperate
    process using Navicat software). I need to somehow compare this
    database with the 'products' database to look for specific changes
    - i.e changes in price, deleted products, or new products. As some
    of the fields in the 'products' database are manually altered, such
    as the product name, I cannot do a straight sync with them.
    Therefore, I use the only field that will remain unchanged as the
    comparison field.
    The somewhat crude method I have come up with is to loop
    through the 'products_staging' table, looking for that specific
    field against the 'products' table. If it finds it, it then checks
    for a change in the price field (i.e has the price of that product
    changed). If there is a change, the 'products' table is updated.
    Likewise, if it's not found, it's treated as a new product and
    inserted as such and so on. At the end of the loop, the record is
    deleted from the 'products_staging' table - therefore at the end of
    the process, the table is empty ready for the next import the
    following day.
    At the moment, the database handles around 300,000 rows - but
    at some point I'm likely to be dealing with many more than that.
    It's working as it is, but taking a considerable time to do so -
    around 4 hours to go through the lot.
    Any suggestions on a better way of accomplishing this? My
    existing crude code is pasted below (the use of maxrows and the
    redirect is to prevent time-outs - parse2.cfm is virtually
    identical to this);

    Firstly, if possible, get the DBs to talk to each other
    without involving
    CF. That will just be slowing things down. CF's for
    generating HTML
    pages, and whilst it CAN interact with databases, it's not
    the best tool
    for the job.
    If that's not possible, use CF as a bridge between them, but
    only to bulk
    insert all the staging data into a temporary table (either
    literally a
    temporary table, or a permanent one used for holding data
    temporarily ;-)
    on the production DB, and then use a DB procedure to process
    all the data,
    again using only the DB server to do so.
    Lastly, if you MUST use CF to do the data manipulation, then
    minimise your
    hits to the DB. Instead of doing single hits to the
    production DB in your
    prodconnect query, get ALL the data you're likely to need for
    updates in
    one hit, then use CF to generate a payload for a bulk update;
    similarly any
    missing data from production can be inferred from that the
    difference
    between the staging and update data, and that can be used as
    your source of
    payload for a bulk insert.
    As a rule of thumb, if I find myself needing to perform
    single-row queries
    within a loop of another query, I start thinking I'm doing
    something wrong.
    Oh, yeah: when dealing with large amounts of queries like
    that, ALWAYS use
    <cfqueryparam> tags instead of static SQL strings.
    Every non-parameterised
    query you pass to the DB engine will need to be compiled
    first, and then
    it's also cached. Which slows you down, and eats memory on
    the DB server.
    This will leave the problem that you're not going to be
    generating your
    report as you go. However I imagine that's a "nice to have"
    compared to
    ensuring the thing actually works. You can generate your
    report
    separately, after the data processing has been done. I'm
    fairly certain
    you would be able to coerce a log out of the DB server,
    somehow, anyway.
    Adam

  • Possible to do this with an Interface?

    ok i have this method in a class called PlayerGUI
    public void play()
              try
                   song.play();
              catch(Exception e)
                            e.getMessage();
         }and this is everything in a class called PlayControl
    public class PlayControl implements ActionListener
         private PlayerGUI gui;
         public PlayControl(PlayerGUI p)
              gui = p;
         public void actionPerformed(ActionEvent e)
              gui.play();
    }so these two classes "communicate" with each other that way.
    now if I make an interface called PlayerGUIListener and put this method (first one above) in it instead of PlayerGUI
    public void stop()
              try
                   song.play();
              catch(Exception e)
                            e.getMessage();
         }and then have PlayerGUI implement it i get these errors
    java:26: interface methods cannot have body
    ^
    Aava:46: interface methods cannot have body
    ^
    java:66: interface methods cannot have body
    ^
    java:75: interface methods cannot have body
    ^
    4 errors
    now the GUIListener has to have some reference to PlayerGUI in order for the method to work......so can anyone point me in the right direction? im basically trying to take the play method out of PlayerGUI and put it in another class file

    When you create the code for the PlayerGUIListener Interface, you do not put in anything except the method declarations. Then you create a class that implements the interface and has code inside the methods. Just like the way PlayControl implement the ActionListener interfacepublic interface PlayerGUIListener {
       public abstract void play();
    public SomeClass implements PlayerGUIListener {
       //bunch of stuff
       public void play() {
          try {          
         song.play();
              } catch(Exception e) {
                          e.getMessage();
    }

  • Possible to do this with Library?

    Hi all,
    I encoded my cds into itunes as 192 bit rate....but as expected I am only getting about 700 songs on my 4 gb nano. So I am wondering if I can have two libraries (or how should I do it)....one leave at the higher bit rate and the other knock down to 128. Maybe I am not thinking about this right but my reasoning behind wanting to do this is that I am worried if I knock the bit rate down and find I notice the quality difference, then upsizing back to 192 would not work and I would have to re imort all my cd's which would be a pain.
    Any thoughts?
    Tammy

    Tammy,
    Transcoding your 192kbps files to 128kbps will degrade the audio more than if you had ripped them into 128kbps originally. See: Buegie, "Oh so tinny" #5, 11:53am Nov 7, 2005 CDT
    I have a 4GB mini and fit ~500 songs on it using AAC/256/VBR encoding. That's still 34+ hours of music with one load. As I have over 300 hours of music, I am not carrying my total collection around with me any way. Why even bother reducing the size of your current files?
    If you want to manage a 'Dual Library', try starting at this Thread:
    Buegie, "Apple Lossless Conversions to Lower BitRates" #6, 09:45pm Sep 14, 2005 CDT

  • Possible to do this with case structure?

    Essentially I want the case structure to do: If case1 = run OR case2 = run, do this, else do case3++
    I'm using a string case structure right now, where for example, the inputs could be SWEEP_A or SWEEP_B but I want the case structure to use case SWEEPAorB. This is so I can have different names for the input string BUT run the same case (this is to avoid redundant code for what I'm doing).
    Thanks.

    For more complex logic use can use create a boolean array and convert it to a number.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • I have a late 2010 MB Air (mini display port) and a new 2013 iMac (thunderbolt) which I would love to use as an external display. I suspect that target display mode won't work.Any ideas for how to achieve this?

    According to the TDM support page, this isn't possible. I tried it with a Mnidisplay port to minidisplay port cable without success. Its a shame that thunderbolt doesn't appear to be backwards compable as I could have achieved this with an older iMac.
    Cheers

    You are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)

  • Is it possible to use variable with interval in BEX for filter or pl funct.

    Hi,
    we have filters in which variables with interval are being used, as well as planning functions in which a variable with interval should be used.
    In the planning modeler everythings works fine. But I have problems to fill values for these type of variables. The error message "specify a value for variable xxx " is always generated. I know it is possible to do this (with VAR_LOW & VAR_HIGH instead of VAR_VALUE).
    Can someone please help?
    regards
    D

    Hello Dries,
    yes, it's possible. You have to use VAR_VALUE_LOW and VAR_VALUE_HIGH.
    Regards,
    Marc
    SAP NetWeaver RIG

  • I downloaded Microsoft office on my IMac.  I share this with someone and we have separate Apple Id's.

    Is it possible to share this with the other Id on the same computer.  If so, how do I do it?
    Thank you in advance.

    you start the program called finder it's icon is 2 faces or 1 face with 2 colours on it
    when you start that it's like file explore on windows
    there Applications should be listed under Favorites
    it's also applications you see when you click the circle with the rocket on it assuming you are running lion or mtn lion

  • Can I do this with SDK?

    I have Premier CS 2. In project I want to check that the sequence within work area bar does contain no black fields or very short shots (microshots) before exporting video.
    Is it possible to do this with SDK?
    p.s. Sorry for my poor english.

    This is not possible with formated searches.
    With SDK, depends on if it is Matrix or Grid, on if it is a system form/your own form. But basically, loop throw the form or datasource, and do the sumatory.
    Regards,
    Ibai Peñ

  • I am trying to find out if I can change a setting of the calendar in my iPhone.   When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change? SS

    I am trying to find out if I can change a setting of the calendar in my iPhone. 
    When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change?

    Hello SMEvans32
    You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud Setup
    http://www.apple.com/icloud/setup/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for