Is it possible to add a field in Attachment screen?

Hello Exports,
I wan to know is it possible to add a  customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field  to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
David

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division. 
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100.  When plant 1101 ships to plant 1301, we do want to post to 360100.  Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Similar Messages

  • Is it possible to add PERNR field to MIGO or MB1A transaction screens?

    Hi,
    Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
    At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
    Is it possible to add PERNR field to any of these transaction screens?
    If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
    If possible, then how it can be done?
    Thanks in advance,
    Satish

    Hi ,
    as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
    the ABAPer can then write the code & add your required logic here.
    i am not very good in this subject. just tried to share what ever i knew.
    regards,
    anubhab

  • Is it possible to add a field to OKEK in configuration SCREEN?

    Hello SAPPERS,
    I would appreciate if someone could provide some input on the following issue.
    Is it possible to add a field to Define Account Determination for Internal Goods Movements (OKEK)?
    This table determines the GL accounts assigned when inventory is moved between plants.  Is it possible to add another column to the left hand side?  I would add the receiving plantu2019s VGCd, if possible.  Even better would be a profit center group (1100 for all 11xx profit centers for example).
    I know there are two ways to add field to the DB Table. They are INCLUDE and APPEND structure.
    Is it possible to append a field to table V_T8A00, and display it in config screen OKEK?
    Thanks for any advice

    Hello,
    On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division. 
    When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100.  When plant 1101 ships to plant 1301, we do want to post to 360100.  Having the receiving profit center group in the mix will enable this distinction.
    Thanks in advance

  • Is it possible to add text field in condition type in PO?

    Dear Guru,
    Please kindly advice. Is it possible to add text field in condition type?
    I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
    So I would like to know is it possible to add text field in condition detail and how to set it up.
    Thank you very much.

    We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
    Ex: Condition Type: ZZZZ  Insurance  
    PO Print out show
    Item No.          Desc                                                  Qty  Unit Price  Amount
    10                 Item description                                  10000   10         100000
    20                 Item description                                  10000   10         100000
    30                 Item description                                  10000   10         100000
                         Insurance <<Description about insurance>>                  9,999
    Edited by: Saiyaman on Oct 1, 2009 1:35 PM
    Edited by: Saiyaman on Oct 1, 2009 1:36 PM

  • Add custom fields on selection screen  and ouput in Transaction QM11

    Hi All,
       i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
      i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
    please requeting the help asap if it is possible.

    Have a glance in below thread.
    Enhancing transaction QM10
    Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

  • Process to add  new field to Account screen and update value from R/3...

    We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
    What exactly is involved in this process?.
    I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
    Any help would be much appreciated.
    Jason
    Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

    Jason,
    If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
    May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
    you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
    Thats it...
    Regards, Sudeep..

  • Transaction DP97: Need to add 2 fields on selection screen...

    Hi,
    I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
    1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
    2) where to add programming logic for this
    Thanks in advance,
    Minal

    Hi,
    Go to program RVPKMASS97.
    Go inside INCLUDE rvpkmasspar.
    (When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
    Click on spiral icon there on the tool bar.
    right click on the '
    ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
    now you can declare ur fields in this implementation.
    After declaring save it and activate it.
    Now go back to ur txn and run. you are able to see the custom fields on the screen.
    Reward me points if it is helpful.
    I think it will help you out.
    Thanks,
    Prasanna

  • Add Custom field to standard screen with table control

    Hello,
    I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
    How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
    Do i need to write any code?
    I'm new to ABAP so could you please give a detailed explanation.
    Also, do i need to change the 'fixed columns' field in the table control?
    Regards,
    Monica.

    hi,
    1) find the screen
    2) add new fields to the screen
    3) program PBO and PAI
    regards,
    Wojciech

  • Project system: CJE2 tcode.. Add the field to selction screen

    Hi,
    GM ALL
    I would like to add the field to selection screen for a dynamic report one which is using in CJE2 T.CODE. I am trying to add the field through se36 [logical data base level] but its not helping.
    Need to add below field to selection-screen
    CJDB_SELIDS
    Field:  SELID_PR
    Please let me know,if any one know the solution..
    Regards
    KK
    Edited by: kirankumar2129 on Oct 18, 2011 10:03 AM

    You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
    Thanks,
    Babu Kilari

  • User Exit to add custom field in Component Screen

    Hi Friends,
    I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit  or workaround possible.
    Thanks,
    Raj

    BADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7

  • Add new field to a screen

    Hi,
    I am trying to add a new check box to a custom screen. This check box must be connected to a new custom field of KNA1 table.
    I have created a new z data element (CHAR) and a new z field on KNA1.
    I have created the check box on the custom screen using screen painter.
    When I change the value directly to the table I can see the change to the check box.
    The problem is that I can't make changes through the check box (I change the value from the checkbox but after saving, the value doesn't cange to the table).
    Is something more that I have to do?
    Thanks in advanced.

    In our custom screen there are other check boxes that are not defined on FIELD statement and they functioning (when I change them, the contents of the table field changes). One of these checkboxes
    is called ZZDATA_PUBLIC.
    I have noticed that there is a subroutine called batch_input_0200 that has among other the following statements:
    DATA: my_bdc LIKE bdcdata OCCURS 10 WITH HEADER LINE.
    PERFORM bdc_field TABLES my_bdc USING 'KNA1-ZZDATA_PUBLIC'
                                    kna1-zzdata_public.
    there are PERFOM statements for every field on the screen.
    The problem is that when I add a new PERFORM statement for my check box the program does not save the changes (When I change the value of the screen fields and save the values does not pass to the table)
    the code of the form bdc_field is the following:
    form bdc_field tables pt_bdcdata structure bdcdata using pw_fnam pw_fval.
      clear pt_bdcdata.
      pt_bdcdata-fnam = pw_fnam.
      pt_bdcdata-fval = pw_fval.
      append pt_bdcdata.
    endform.    
    can anyone help me?
    Thanks
    Edited by: Odysseas Spyroglou on Jun 10, 2009 8:08 AM

  • Add one field on the screen.

    hi ,everybody.
    i want to add one field on the progam SAPMV10A,it is VD05,The screen number is 300.the field name is TVLV-ABRVW.How can i do,thank you.

    Check here:
    SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payab;e --> Customer Accounts -> Master data --> Preparations for creating customer master data --> Adoption of Customer's own master data fields --> Businees Add-in:....

  • Need to add date field on select screen of report RM06INP0.

    Hi All,
    I have to create a new report ZRM06INP0 as a copy from RM06INP0 and add a field in the selection.
    When the selection "Price Determination w/o PO" is not picked then we need a maintainable field from the info record. The default for the date is 9999.12.31 and should manually maintained. This date shoulde be written in the info record.
    How to achieve this?
    Please see OSS Note 392 988 Solution to 2 for more info.

    Hi Akash
    What kind of date is you wanted? You can try to find it in dynamic selections.
    regards,
    Archer

  • Add new field in selection-screen and output dynamically

    hi gurus,
      i need to add field in selectio-screen.
    i need to validate the field with existing fields.
    i need to add this in alv grid output list dynamically.
    thanks & regards,
       kgn9.

    Hi
    Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
    FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
    ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
    IF SY-SUBRC = 0.
      <BKTXT> = <.....>.
    ENDIF.
    Max

  • Add a field in selection screen and enter data in that field .......

    Hi,
    I want to add a field in the seletion screen and when the user enters data , it should store in the data base table, the data base table is MKPF-BKTXT, please can any one let me know how to do this... very urgent...

    Hi
    Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
    FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
    ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
    IF SY-SUBRC = 0.
      <BKTXT> = <.....>.
    ENDIF.
    Max

Maybe you are looking for