Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

I wanted to get a Ps4 soon but i dont have a tv, and on my computer i dont have a hdmi port. i see on other models of my computer they have it for example on the 23-d052 its like this
Where as on my one is like this
so that part is just an empty space. i was wondering if it were possible to add the hdmi port or if there was a way i could still play the ps4 on my computer?
This question was solved.
View Solution.

The USB 3.0 to HDMI adapter referenced above, is only designed to connect to a USB port on you computer and output an HDMI signal to an HDTV or monitor. It will not allow you to connect the HDMI output of a game console to your computer.
It may be possible to purchase all the components necessary to add that functionality to your computer, however the cost would far exceed the price of a new monitor or HDTV. Please purchase an inexpensive HDTV or monitor to use with your PlayStation.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

No HDMI port

Two years before I buy G570 from Fry's. Today I need connect my computer to HDTV by HDMI output but alas there is no HDMI port . There is three side by side USB (one of them different appearance) , one RJ45 and one VGA connector at the left side. Between USB and RJ45 there is no HDMI connector.
İs it normal ?
Can I add a HDMI port ?
Thanks

hi Psawed,
If the system does not an HDMI port it means that a transcoder is not included in the Board and VGA Port cannot output a Digital Signal. Only analog.
What you'll need is an external Signal transcoder, From VGA analog signal to HDMI Digital Signal.
You'll need one of these VGA to HDMI Tanscoder.
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Is it possible to add an Expand all/Collapse all button in WebHelp Output?

Hi there,
We now have > 15 child projects in our merged online help, each containing hundreds of topics. Each child project is a chapter in our WebHelp online help output.
If a user opens a couple of topics in each project, the TOC can become difficult to navigate. Is it possible to add a button that enables users to collapse all of the open chapters / expand all of the closed chapters? We are using RoboHelp 10.
Thanks a lot,
Niamh

Hi there
Expanding all could be problematic. But collapsing all should be a snap. That is, as long as you don't mind one teensy side effect. That side effect would be that the default topic would load up in the Topic pane and replace whatever topic was open at the time your user clicked the Collapse All.
The way to Collapse All is to simply create a hyperlink that re-opens the WebHelp start page. Things reload fresh (with the TOC all nice and collapsed).
If you would like to suggest to the Adobe development team that we actually get proper collapse or expand all buttons, please feel free to suggest it using the link below:
http://www.adobe.com/go/wish
Cheers... Rick

Apple customer care case no:518552729 Support on HDMI PORT in Sony TV

This is from Mumbai, India....Requirement of multiple HDMI port in TV is must, the same was not informed while selling the product to me....
Struggling for last 10 days to get convertor or splitter for using both cable tv and apple tv same time...now whenever I wanted to use Apple tv I have to manually switch the cable as my Tv has only one HDMI PORT. This will really defeat the concept of Apple Tv product.
When enquired with the seller, it is informed to me that, this is the first time they are getting such issues...
Specifically when the products are marketed here, I expected apple would have considered or visualised the user issues in advance..
Accessories like converter, splitter, switcher etc if being launched along with Apple Tv product....it would have helped the customer like me...
Ireespective of my issue...I love apple product...i use iphone 5 and Ipad also...

this is a user helping user froum we are usings like yourself think you need the feedback channel
http://www.apple.com/feedback/appletv.html
but fail to see how apple should inform that you need many hdmi ports appletv only needs one
if your tv had 7 hdmi ports and you were using all 7 then you would have the same issue
hdmi splitters often have issues following the hdcp http://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection
which is why so many don't work

How do I Add second monitor to ALL in One ENVY23 that has a HDMI port

How do I Add second monitor to my ALL in One ENVY23 that has a HDMI port the computer has Win 8 Model #: 23se-d494
Product #: F3D93AA#ABA
Serial #: [edited Serial Number by Moderator]
Software Build #: 14AM1HRA601#SABA#DABA
Service ID #: 20140521
PCBRAND #: HP

Here are the specs for your HP ENVY TouchSmart 23se-d494 All-in-One Desktop Computer. Based the specs, the HDMI port on the side of your computer is an INPUT only. This model doesn't have a video output of any kind.
1 - Controls 2 - HDMI In port (model dependent)
You will need to purchase and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I want to view the screen of my dslr camera in live view on my macbook pro via the hdmi port, is this possible?

I would like to view the output from my DSLR on the screen of my macbook using the hdmi port. I know I can connect to a tv to send images "out" from my macbook, but is it possible ti send images in?? I operate my camera by remote control, and would really live a live view if possible.
Thank

Nope - you can only output video from your MBP - there's not a port for input.
Clinton

HT1586 Is it possible to connect my Apple TV to a TV withouth an HDMI port

I have just bought an Apple TV but my TV does not have a HDMI port - can i use it on this TV and if so what connectors do i need?

Hi @kateaird.Welcome to Apple Support Communities, and congratulation on your new Apple TV.
Unfortunately the latest generations of Apple TV only output video through an HDMI port. While the first generation also had component video and RCA stereo audio ports, they were removed in the second generation.
However, there are HDMI to 3RCA 3-RCA Video Component converter which you can purchase, to connect your Apple TV to a TV that does not have HDMI port.
I hope that helps.

Does pavilion dv6000 - dv6720ej have a HDMI port??

does pavilion dv6000 - dv6720ej have a HDMI port??
if not.... can i put one??? it is possible?

Just look at the computer and see if you can find the port. If you have it you will find it on the left side as you are looking at the screen. It is longer and skinnier than a usb port (third from left below). If you don't have it you can't add it.

How to connect TV with limited HDMI ports?

My Panasonic Plasma TV has 2 HDMI ports. I have been using HDMI 1 for a DVD Recorder and TV linked through HDMI 2. This gave me upscaled 1080p resolution on both.
I want to move TV to the Component ports to allow me to attach a Cinema system to the HDMI 2 port. This will give the neatest solution for the TV/DVD/Cinema remotes.
Is it possible to connect a Cinema system (5.1) to HDMI 2 as I understand that this will "disable" the Component Ports.
Prior to getting the Cinema System, as an experiment I have attached TV with component cables but the picture resolution is poor, I suspect it is only 480p. Is this to be expected?
I would like the Cinema sound for normal TV and for iTunes music etc. Is this set-up possible and how is it best to set it up.
If not how best can I meet my needs?
Regards
Beano

Winston Churchill wrote:
If you connect devices to the two HDMI ports you have on your tv it should not disable your component ports on the tv, although obviously you can only select one or the other. I don't see any reason that your component only uses 480p (since you are in the UK this would actually be 576p) unless the tv's component input is limited to this resolution. Have you tried changing the video output mode from the tv.
One other option would be to employ an HDMI switch, but be aware HDMI can be troublesome when ported through a switch, if you choose this route, ask here on this forum for anyone with experience of the switch you are considering before purchasing, not all work properly. I have heard the extrememac switch is OK, but I personally have no experience.
I thought that switching TV off for a while it would reset and set up on the newly found connections. However I have invoked the Video output scan from the  Remote unit. This went through all the options from 480p, 576p, 720p, 720HD and 1080p, which were all OK. There was one hiccup when the picture exceed the Plasma height but re scanning reset this.
The pictures are now in the highest quality and all the thumbnails are now visible.
I was experimenting with alternatives as I wish to avoid HDMI switches and also by using Panasonic Cinema system means all the remotes are compatible, if not exactly interchangeable.
I will now have to decide which units give me the best set-up.
Thanks again for the help.
Regards
Beano
Message was edited by: Beano43

How to connect Apple TV when I have run out of HDMI Ports?

I have a Sony Bravia TV with 3 HDMI Ports - in those I have connected:
- Sony Home Theater Surround Sound
- Playstation
- Sky Digital TV HD Box
Is there a way to connect Apple TV without disconnecting any of the above? (and without buying a new TV with 4 HDMI ports!)

lkrupp is correct, the only soution is to add what's called an HDMI switch to your setup. The HDMI switch normally has 2, 4, 6, or 8 HDMI inputs and one output. The output goes to your display. You then select which input you want to choose.In your case, you can do one of two things:
Connect all your sources to the HDMI switch. You then select sources via the HDMI switch and you no longer need to change HDMI inputs on your TV.
Disconnect one of the HDMI sources you have (let's say it's the Playstation) and plug both the Playstation and the APPLE TV into the switch. In this setup you need to change the input on both the TV and the HDMI switcher.
The simplest setup in your case is to buy a 4 or 8 port HDMI switch and put all your devices on the switch. If you are looking for inexpensive HDMI switches, you need to look at Monoprice. The stuff is all manufactured overseas and can be hit or miss but it's the cheapest that you'll find. If you feel like you need some guidance and help, then try www.hdtvsupply.com. They have a good selection and great support.

Can i use the HDMI port and the Mini displayport to HDMI adapter simultaneously to switch between two displays?

I just bought a new Mac Mini and was hoping that i can connect my TV via the HDMI port and also connect a 19" monitor via the Minidispaly port to HDMI adapter or the Mini DisplayPort to VGA Adapter. This way i can pick between having the screen mirrored to my tv, or having the screen displayed at my desk.
Is this possible?

Yes. Note the resolution via HDM is limited to
This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
HD 4000 Mini Video

Is it possible to add a firewall Filter or Rule Set to the Extreme Router (802.11n)

Is it possible to add a firewall Filter or Rule Set to the setting for the Extreme Router (802.11n) like the following:
"ALLOW TCP/UDP IN/OUT to 208.67.222.222 or 208.67.220.220 on Port 53" and
"BLOCK TCP/UDP IN/OUT all IP addresses on Port 53"
The goal of this is to create a firewall rule to only allow DNS (TCP/UDP) to OpenDNS' servers and restrict all other DNS traffic to any other IPs.
Or, alternatively is there a way to configure same applied to the Network preferences on IMAC OS X?
Thanks and much appreciation to anyone who has any clue about this.

Sorry, I think you've got it backwards.
The concern is NOT that the child can make changes to our hardware/AEBS, or even our network software on my IMAC - nothing's been changed.
BUT, he changed the dns settings on his OWN device (ie chromebook) to google public server, accessed the AE using our home wifi network BUT bypassed our dns settings. Capeesh?
See: http://www.pocketables.com/2013/03/how-to-use-change-the-dns-settings-on-your-ch romebook-and-use-googles.html

In IMovie11, is it possible to add a menu page with options such as PLAY, SCENES, TRAILER, etc

In IMovie11, is it possible to add/create a menu at the beginning of the movie with options like PLAY MOVIE, SCENES, TRAILER, etc..

*I found a solution. HP owes me $20,000 in consulting fees.*
To print to a LaserJet 3600 or 2600 from a newer Mac using 10.6, you must do the following:
Step 1: Install Foomatic HPIJS drivers
Step 2: Get an AirPort Express or equivalent print server
Step 3: Connect the printer via USB to the print server, and connect
Step 4: Go to Print & Fax, then click the + button to add a printer
Step 5: Select HP Jetdirect - Socket for the protocol
Step 6: Enter the IP address of the printer server, followed by a colon and the port number (9100 or 9101)*, i.e. 1.2.3.4:9100
Step 7: Name the printer, then click on the Print using: drop down menu
Step 8: Select the Select Other Printer..., and choose the appropriate HPIJS driver.
* To determine the correct port, open Network Utility in the Utilities folder. Click on Port Scan. Type the IP address of your print server, then check the Only test ports between... and enter 9100 and 9101. It will report back the open TCP port.

My desktop,model s5-1204, came without hdmi port. can one be added

My desktop,model s5-1204, came without hdmi port. can one be added.
it has a dvi

Hi,
Based on its specs, it has:
Expansion Slots:
1 PCI Express x16 (Gen2.0)
3 PCI Express x1 (Gen2.0)
1 PCI Express Mini Card x1
The option: you can add a video card to the PCIe x16 and use a card which has HDMI port. It only has 220W PSU therefore you have to update the PSU too.
Please also read the following link:
http://answers.yahoo.com/question/index?qid=20120510114931AALOCHU
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I add a redirect port, or RPT port, in Windows 7?

I'm dumbfounded. I know in Windows XP there was an option to add a printer and select the redirection port. Seems in Windows 7, or at least my installation, that option is missing. I need to be able to add a redirect port to setup some
specialized printing we do here in our office. Hope my question makes sense and I hope I have just missed something and it's really just not that it's not possible or I'm screwed!
Also I have tried the "Add New Port Type" options and it asks for a driver which I can't seems to find anywhere. Any help is much appreciated as this has halted my Windows 7 roll out.

Hi,
Do you mean in Windows XP, we can add a new port in File-> Server Properties-> Ports-> Add Ports?
If this is the issue, please see the information below:
====================================
In Windows 7, we have no Server Properties options. But we can also achieve the same goal by using the following two methods:
Method 1: Right click one of the local printers and select Printer Properties. Click Ports-> Add Port…
Method 2: In Control Panel, click Administrative Tool and select Print Management. Then open Print Servers and select the local machine. Then right click Ports and
click Add Ports…
Hope this can have a little help.
Best regards,
Spencer Shi
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

Similar Messages

Maybe you are looking for