Is it possible to add a logo layer to an H264 video

I just found out the following Adobe FAQ :
quote:
Q: Does the H.264 implementation in Flash Player support
alpha channel?
A: No. Our first implementation does not support alpha
channels using H.264...
Would that means that it is not possible to add a logo layer
to an MPEG4/h264 video

Unfortunately, fading out at the end and fading in at the beginning does not create a seamless loop, since there are a few moments when the clip alpha is 0% and everything is completely black.This might be ok for some situations. But for creating a seamless loop, I need to have something, well, more seamless.
Actually, I think I may have come up with a possible workaround to simulate a true seamless loop of an embedded video (at least get closer to it) by placing a still image (which has been converted into a movie clip) of the first frame on a new layer at the last frame, and then copying that keyframe and pasting it about 25 frames before the end, then alpha fading from the first keyframe to the final frame.
It is not perfect, but it's something.
Perhaps someone else might have a better solution?

Similar Messages

  • How can I add a logo to the bottom right of a video?  I have a jpg logo to use.

    How can I add a logo to bottom right of video, using a jpg?

    Even though David's answer is for Final Cut Express, the same answer should apply for FCP X only you would need to place the "track" ... let's say clip ... above the clip it is to overlay.  Thus it can either be a storyline or a connected clip but it should reside above the primary storyline assumming that is where the video is you want your logo to overlay.  As David points out, the type of graphic file should be one that allows the transparent background feature such as a PNG or PSD, etc.  Of course, if your logo has a solid box background, you may be able to simply scale it down and position it to the right place and overlay it over your other video clip using the method described above.  Hope this helps.
    stephen

  • How do I add a logo/image to my signature?

    Hi all,
    A pretty easy one I hope....I just want to add a logo to the bottom on my signature. Is this possible within Mail? If not does anyone know what email programme I could use to do this?
    thanks
    iBook Clamshell SE - iMac G5 20inch - iPod Nano 4g   Mac OS X (10.3.9)  

    Don't worry! Don't worry everyone I worked it out. Actually I just read the Mail support page segment on adding a signature. You just add a signature as usual but when you add the text, you can drag and adrop a pic/logo into that box. Ah, duh!

  • Add a logo to the header definition of an Interactive Report

    Hi Folks.
    Using Apex 3.1 and BI Publisher.
    I am enabling an Interactive Report region to output to PDF & Excel.
    Has anyone managed to add a logo to the Header/footer definition in the Print Attributes section?
    Is it possible? The region definition does not understand simple HTML syntax.
    If anyone would let me know if a) They've done it or b) It ain't possible that would be great.
    Many thanks.
    Dogfighter.

    Just reading through this thread. So perhaps a few comments might be helpful:
    - Interactive report regions do currently not support Report Layouts, you're limited to the built-in generic layout and won't be able to include images
    - You can add a button to your interactive report region page which could initiate the download of a report query, when doing this, you would get the result set of your report query not the interactive report region, so even if the queries are the same, you might have different filters applied to your interactive report
    - You can in fact include static images in your RTF report layouts using the BI Publisher Desktop Word Plug-In and MS Word, so you can have logos etc in your PDF documents. But report layouts currently only work with report queries and classic report regions
    - You can also include dynamic images in your PDF, e.g. based on images stored in a BLOB column, there's currently a character escaping issue causing some trouble with this, which will be fixed in 3.1.1, more on that once 3.1.1 is out (soon)
    - the print server overwrite is designed to point to a different print server than the one configured for your APEX instance, not to point to a specific report. So if your instance has BI Publisher configured, but for a specific report you want to do some special rendering using your own code, you can write e.g. a JSP, Servlet, etc that's doing the rendering, and then point yout report to that URL
    Hope this helps, we do plan to add support for report layout to interactive report regions in the next full release of Application Express
    Regards,
    Marc

  • Spark ButtonBar is it possible to add a "custom" button?

    Either is it possible to add custom ButtonBarButton components to a spark ButtonBar?
    For example:
    <s:ButtonBar>
    <s:ButtonBarButton />
    <s:ButtonBarButtonWithImage />
    <s:ButtonBarButtonWithChildren />
    </s:ButtonBar>
    Or create a ButtonBarButton with children - like a Menubar?
    P.S: I could use the MenuBar, but there isn't a spark version. I would need a style customization.

    I've tried your component. It will be very helpful.
    I have a doubt (I think it's about List component):
    Considered I'm using a vertical layout with one MenuBar (height = 40 ) and one Container below. When, the user mouse over any menu item the submenu is displayed over the container, even the submenu has more than 40 of height  - like absolute layout.
    How the submenu is added to the layer - over the container (it didn't respect the vertical layout ?!)  (I didn't find in the SDK sources.)
    How the x and y is setted since the layout is vertical?
    Where can I get more information?

  • How do i add my logo to a 3d object

    i am using photoshop cc 2014 and i have created my 3d object and it looks great! but now i am trying to add my logo to my 3d object so when i rotate it, the logo rotates with my 3d object. How do i do this ?

    Position the 3d object for the best straight on view of where you want your logo to be. Position and size you logo in a layer right above your 3d object. Select both layers and press cmd/ctrl-e to merge them.

  • Add 'channel' logo to every frame

    Hi,
    is there a way to add a tranparent background image to every frame of my movie, as if it was a channel logo ?
    I could build a transparent image of the right resolution with the logo on the bottom right. But how do I add it ? Ideas ?
    Erik

    I have QTPro... How would you do that?
    1) Create logo in graphic application like Photoshop with transparent background
    2) Export as "Transparent Image" (e.g., with alpha-channel as in a PNG file)
    3) Open your edited movie in QT Pro
    4) Open the "logo" file using the "Open File" QT Pro option
    5) Press Command-A to select the "single frame" logo
    6) Press Command-C to store the logo in memory
    7) Activate the edited movie player (i.e., mouse click on it)
    8) Use the "Add to Selection & Scale" option to add the logo in memory to the edited movie and match the length of the added track to the length of your edited movie
    9) Select the "logo" track in the upper half of the properties window and the "Visual Settings" tab in the lower half of the window
    10) Set the "Tansparency" pop-up to "Straight Alpha" (Since the logo was the last track added it should be visible, but if it isn't, adjust "Layer" to a "lower" number to place it over your edited movie)
    11) I usually reset playhead to beginning of the movie, press Command-B to deselect in/out points and save the file as a "Standalone" MOV file.
    And that's all there is to it...

  • Is it possible to add extra frames to the collage templates?

    At the moment in using PSE10 Trail, and the maximum amount of frames i can see that i can use is 19, is it possible to add more???
    Any help much appreciated
    Georgie

    You can use all of the frames in the content panel. After arranging your collage and clicking done, you need to save the file as a PSD file to preserve all the layers that were automatically created.
    Then open Full Edit and click:
    File >> Open
    Then navigate to your PSD file.
    If you open the layers pallet you will see that each photo in your collage has it’s own individual layer.
    Select one of the layers (highlight it) then choose a from the content tab and click apply.
    Click to view

  • Is it possible to hide a hierarchal layer from one that is lower in the layer stack?

    In AI CS5 Version 15.0.2 for Windows 7 64-bit; Is it possible to hide a hierarchal layer from one that is lower in the layer stack? I would like to make visible one of the bottom layers and hide a layer near the top that is on a separate artboard.

    Shift click on the mask in the transprency panel and you will add a red x through the mask symbolizing disabling of the mask.

  • Possible to add maps to iMovie'11?

    I would like more maps in iMovie. Is it possible to add others taken from scanned images, or other sources such as Google Maps?

    rebbit wrote:
    Is it possible to triple layer in iMovie '11?
    short: no
    long: yes
    prep layer#1+#2 in a project, export, re-import into 2nd project, add layer #3

  • Is it possible to add markups to a PDF that I am not the author of

    Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me).  I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
    In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.  
    Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review. 
    Well, there is no Comments selection in my toolbar.   Second method is given by
    Quickstart: Start an email review
    An email-based review lets you track review status and merge received comments into the PDF.
    Click Review & Comment and choose Attach For Email Review.
    If prompted, enter your identity information to create a reviewer profile.
    Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
      If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
    But there is no Review & Comment button to click.
    So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
    Thanks in advance for your response.

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How do i add a logo to my signature

    i want to add a logo to my signature. Is there an app that can help me do this easily

    you can't

  • Is it possible to add a graphics card to the back of my HP

    Hello  I want to know if it's possible to add a new graphics card to the back of a Laptop not inside of it but on the back of my laptop ???  my graphics Card is a Intel 4000 graphics card is a terrible for gaming TERRIBLE !!!  

    Not sure where it would go on the back, but no the system is closed. There is no place to insert a graphics card or attach it. You will find some hokey stuff on the internet where people say you can plug a video card in the wireless card slot but those are a hoax at worst and at best they do not tell you that such a thing would not even perform as well as what you have and is likely to damage the motherboard. 

  • Is it possible to add a backlit keyboard to an hp envy touchsmart 15

    is it possible to add a backlit keyboard to an hp envy touchsmart 15?

    Daevid.
    Yes you can.
    Your manual here.
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
    Page 20 chapter 3.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

Maybe you are looking for