Is it possible to add a new field in Block/Unblock vendor screen?

Hi Experts,
Kindly any one advise is it possible to add new field in xk05 screen as shown in the attached screen.If possibe,please advise the possible steps
to add this new field.
Thanks & Regards,
Anusha

Hi Pavan,
Thank you for your reply.I have searched for user exits there is no screen exit of xk05 and I put a break point in CL_EXITHANDLER method and I found VENDOR_FIELDSTATUS BADI only for this screen.So,there is no BADI or user exit to add a new field to this screen.So,how to add
a new comment field to this XK05 screen.
Rgds,
Anusha

Similar Messages

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to add a new field at a table controll screen change for CIN 2007????

HII EXPERTS
I HAVE TO CHANGE THE SCREEN OF J1IA TCODE . I HAVE TO ADD A NEW FIELD IN THE SCREEN LAYOUT OF TCODE J1IA TABLE CONTROLL.
THANK YOU IN ADVANCE,
PLZ HELP ME OUT AS IT IS VERY URGENT.
SUPRATIK

Hi Supratik,
you can do it by looping at screen structure and append field
dynamically.
see help on 'screen' structure.u will get ur requirement.
Rewards points if helpful.
Regards,
Hemant

To add a new field in Select Party Site screen

Hi,
I want to customize the http://oradev.csc.com:8000/OA_HTML/csifLOV.jsp page to display the one more new field.
I have downloaded the csifLOV.jsp page but not knowing how to customize this page. Can anyone please throw some light.
Thanks.

Hi,
I have opened the .jsp page and it contains the following code, but as i'm new to this modification i'm not able to find where the column names are:
<%@ include file="jtfincl.jsp" %>
<%@ include file="csifContextIncl.jsp" %>
<%
csiPageContext.setPermissionName("SupPer");
csiPageContext.setJspName("csifLOV.jsp");
csiPageContext.setFormName("LOVForm");
String jspName = csiPageContext.getJspName();
String csiFormName = csiPageContext.getFormName();
String formName = csiFormName;
appName = "CSI";
if (CsifutDebug.LOCAL_DEV_ENV)
Properties param = System.getProperties();
String prop = param.getProperty("JTFDBCFILE",
"E:\\myprojects\\dbcfiles\\crmdev04_SCCSIDV1.dbc");
param.put("JTFDBCFILE", prop);
prop = param.getProperty("service.Logging.common.filename",
"E:\\myprojects\\jtflogs\\ebppFW_log");
param.put("framework.Logging.system.filename", prop);
prop = param.getProperty("service.Logging.common.filename",
"E:\\myprojects\\ebppSys_log");
param.put("framework.Logging.system.filename",prop);
System.setProperties(param);
// this may have to change for other people
// ServletSessionManager.startStandAloneSession(appName,true,
// "csiuser","welcome");
     ServletSessionManager.startRequest(request,response,
appName,true,"csiuser","csiuser","Authenticator.system");
/* Push the logFileName into the cookie for future use */
oracle.apps.jtf.util.SystemCheck.setJTFCookie();
// Set cookies for menu rendering
MenuRenderer.setMenuCookies(request);
//Added HTML tag with language code for accessibility.
String CSI_HTML_LANG_CODE;
CSI_HTML_LANG_CODE = oracle.apps.jtf.util.HtmlUtil.getHtmlLanguageCode();
if (CSI_HTML_LANG_CODE == null)
CSI_HTML_LANG_CODE = "en-US";//Added HTML tag with language code for accessibility.
%>
<HTML lang="<%=CSI_HTML_LANG_CODE%>">
<%@ include file="csifStartReqIncl.jsp" %>
<%@ include file="csifExceptionHandleBegin.jsp" %>
<jsp:useBean id="lovBean" class="oracle.apps.csi.framework.pb.CsifpbLOVBean" scope="page" />
<%
lovBean.init(csiPageContext, request);
lovBean.process();
int pageMode = lovBean.getMode();
if (pageMode == CsifpbBasePageBean.LOVRETURN_MODE) //forward to the caller of the LOV
     if (CsifutDebug.DEBUG)
CsifutDebug.addMessage("forward URL=" + lovBean.getForwardToURL());
csiPageContext.setForwardToJSP(lovBean.getForwardToURL());
%>
<%@include file="csifForwardIncl.jsp" %>
<%
else
CsifcmException error = lovBean.getException();
String callerName = lovBean.getJspCallerName();
String labelSelect=null;
String labelEnterPartial=null;
String labelSearch=null;
String labelTitle=null;
int origAppID = csiPageContext.getPageAppId();
String origAppName = csiPageContext.getPageAppName();
csiPageContext.setPageAppId(542);
csiPageContext.setPageAppName("CSI");
Hashtable allLovPrompts = CsifutRegion.getPrompts(csiPageContext, "CSI_FRAMEWORK_LOV");
csiPageContext.setPageAppId(origAppID);
csiPageContext.setPageAppName(origAppName);
if (allLovPrompts != null)
labelSelect = (String)allLovPrompts.get("CSI_SELECT");
labelEnterPartial = (String)allLovPrompts.get("CSI_ENTER_PARTIAL");
labelSearch = (String)allLovPrompts.get("CSI_SEARCH");
labelTitle = (String)allLovPrompts.get("CSI_LOV_TITLE");
else
allLovPrompts = new Hashtable();
String cancelPrm = (String)allLovPrompts.get("CSIF_CANCEL");
%>
<head>
<title><%=labelTitle%></title>
<script language="JavaScript">
function newSearch()
document.<%=csiFormName%>.<%=CsifpbBasePageBean.PAGE_MODE_PARAM%>.value = '<%=CsifpbBasePageBean.QUERY_MODE%>';
document.<%=csiFormName%>.submit();
function returnToCaller()
// alert("Return to " + "<%=callerName%>" )
document.<%=formName%>.action = "<%=callerName%>";
document.<%=formName%>.submit();
function <%=lovBean.LOV_CANCEL_FUNC%>()
var LOVForm = document.forms['<%=csiFormName%>'];
var LOVFieldName = '<%=lovBean.getLOVFieldName()%>';
var LOVOrigValFieldName = LOVFieldName + '<%=lovBean.LOV_ORIG_VAL_FIELD%>';
LOVForm.elements[LOVFieldName].value = LOVForm.elements[LOVOrigValFieldName].value;
LOVForm.elements['<%=CsifpbBasePageBean.PAGE_MODE_PARAM%>'].value = '<%=CsifpbBasePageBean.LOVRETURN_MODE%>';
LOVForm.elements['<%=CsifpbBasePageBean.MODE_ACTION_PARAM%>'].value = '<%=CsifpbBasePageBean.ACTION_CANCELLED%>';
LOVForm.action = '<%=lovBean.getJspCallerName()%>';
LOVForm.submit();
function onPageLoad()
document.<%=csiFormName%>.<%=lovBean.getLOVFieldName()%>.focus();
</script>
<%=lovBean.renderLovReturnJS()%>
<%@ include file="jtfscss.jsp" %>
</head>
<%@ include file="csifBodyBeginIncl.jsp" %>
<%
//if (!CsifutDebug.LOCAL_DEV_ENV)
if (CsifutTimer.TIME)
CsifutTimer.start(CsifutTimer.JTF_MENU);
%>
<%@ include file="jtfdnbartop.jsp" %>
<table summary="" width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>
<%
if (CsifutTimer.TIME)
CsifutTimer.stop(CsifutTimer.JTF_MENU);
} // end local_dev_env
%>
</td>
</tr>
<tr>
<td>
<form name="<%=csiPageContext.getFormName()%>" method="post" action="<%=jspName%>">
<table summary="" width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td valign="top">
<table summary="" width="100%">
<tr>
<td> </td>
<td class="pageTitle" colspan="4"><%=labelSelect%> <%=lovBean.getLOVPageTitle()%>
</td>
<td> </td>
</tr>
<%@ include file="csifDisplayException.jsp" %>
<tr>
<td width="5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="22.5%"> </td>
<td width="5%"> </td>
</tr>
<tr>
<td> </td>
<td>
<div nowrap align="right" class="promptReadOnly"><%=labelEnterPartial%></div>
</td>
<td colspan="3">
<input type="text" name="<%=lovBean.getLOVFieldName()%>" id="<%=lovBean.getLOVFieldName()%>"
value="<%=HtmlWriter.preformat(lovBean.getLOVSearchPattern())%>" size="15">
<input type="button" name="SearchButton" id="SearchButton"
value="<%=labelSearch%>" onClick="javascript:newSearch()">
<input type="button" name="CancelButton" id="CancelButton"
value="<%=cancelPrm%>" onClick="javascript:<%=lovBean.LOV_CANCEL_FUNC%>()">
</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td colspan="4">
<hr>
</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td class="prompt" colspan="4">

<%
if (lovBean.getMode() != CsifpbBasePageBean.LOVRETURN_MODE)
out.print(lovBean.renderLOVValuesTable(labelSelect));
%>

</td>
<td> </td>
</tr>
<tr>
<td> </td>
<td colspan="4">
<input type="button" name="CancelButton" value="<%=cancelPrm%>"
onClick="javascript:<%=lovBean.LOV_CANCEL_FUNC%>()">
</td>
<td> </td>
</tr>
</table>

          </td>
     </tr>
     </table>

<input type="hidden" name="<%=CsifpbLOVBean.LOV_VALUE_SEL_PARAM%>" >
<%
if(csiPageContext.isAccessible())
%>
<label for="<%=lovBean.getLOVFieldName()%>" class='hidelabel'><%=labelEnterPartial%></label>

<%
%>
<%@ include file="csifHiddenFieldsIncl.jsp" %>
</form>
<%@ include file="csifBodyEndIncl.jsp" %>
</HTML>
<%
} // end of if (pageMode == CsifpbBasePageBean.LOVRETURN_MODE ) .. else {
%>
<%@ include file="csifExceptionHandleEnd.jsp" %>
<%@ include file="csifEndReqIncl.jsp" %> 
Thanks

Need to add a new field to XD01 under company code data tab

Hi,
I need to add a new field under Company code data of XD01 under Account Management tab.
I came to know two BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS can be used for this. But for these BADIs we need to create a sub screen.But for my requirement I need not use a subscreen just to add a field.
Please let me know how to do this?

Hello Pavan,
Do you have any solution for this issue? I only can creat a new tab but hi prefer as you, creat a field Company code data of XD01 under Account Management tab.
I read that is not possible, this is true?
Best Regards,
Eduardo Paiva

Add a New field in Define Plant, OX10

Hi,
I would like to add a new custom screen field in OX10 ( define Plant, in SPRO). The view used in OX10 is V_T001W. Is it possible to add a new custom field in OX10 ?
Thanks & Regards,
Sandipan

Hi Arun,
Thank you for the reply.
We would like to classify plants, based on some constant values. We are not getting any SAP fields in OX10 which could be used for this purpose. Just wondering if we can add a new filed in OX10, if there are any user exit or BADIs
Thanks & Regards,
Sandipan

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Add a new field in report S_ALR_87012178 and use it for sorting

Hi all,
We're requested to add a new field KNVV-VKGRP in this report S_ALR_87012178 (program RFDOPR10). As this is a standard program, I'm thinking of copying it into a Z one due to the problems when editing the report.
Does anyone know the best way to do it? I'll appreciate it so much!!
Thanks a lot in advance!
Regards,

Hi,
The procedure to create the new VOFM.
1. Go to VOFM transaction
2. Page down until you find a new spot on the page to put in the VOFM number and description.
3. Put in the VOFM number and the description of the VOFM.
4. Now the VERY IMPORTANT part of the process. Double click on the VOFM description not the VOFM number to create this as a Development/Correction and not as a repair. If you double click on the number then this copies some existing code and prompts you for a repair.
5. Activate and generate the VOFM routine. Note: Configuration must be setup by the OM team for this step.
for example Go to the routine number that needs to be copied.
Put your cursor on the routine number field that needs to be copied.
Overwrite that number with your new routine number and hit enter.
The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
Ex.
You have to copy routine 104 to 904
Routine number Description Active
104 Bill.bus.item data X
Put your cursor on 104 and then change it to 904 and hit enter.
904 will be created as a copy of 104 and you can make your changes in 904.
Don't forget to activate it after you are done.
refer the below link
https://forums.sdn.sap.com/click.jspa?searchID=3604222&messageID=994791
Regards

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How to add a new field in MM01, with say contaminent as a field?

How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?

Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717#

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Is it possible to add a new graphics card to my macbook pro 2011 13"

Is it possible to add a new graphics card to my macbook pro 2011 13"?

Hi W,
Sorry, but no. It's soldered onto the logic board.

How to add a new Field to the WEB User Interface in CRM 2007

Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.

Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S.

Layout Set: How to add a new field in a layout Set?

Hi ABAPPERS.
Question:
How can I add a new field in a layout set?
Scenario:
QC21 uses a global Layout Set ZQMECOA_GLOBAL.
There's a field required in this Layout Set which is Production Date(CAUFVD-GLTRP).
Where is the date query happening here?
Where can I insert the SELECT statement for the new field required?
I try to look at:
OPEN_FORM and WRITE_FORM, it seems that date query or SELECTION of data is not happening here.
Thanks.

If you are adding a header field then you will extend the header structure in CRM and do the same with Item structures for Item fields. You will use EEWB or similar technique in the CRM backend to extend the header or item.
These extended fields in the backed are available in customer_h or _i structures in the order object that can be read and modified in the Header BAdI or Item BAdi.
If you think that this message is cryptic or not enough, then you should search for Extension Guide in this forum and read the document.

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Is it possible to add a new field in Block/Unblock vendor screen?

Similar Messages

Maybe you are looking for