Is it possible to add a target amount to a query

If I have a number being disagregated by Cost Center is it possible to add a target amount on a cost center level? I know we could add an attribute to Cost Center that hold a value for this target, but that could not be used in calculations or be shown in chart compared to the actuals. Does this have to be added to the cube as a Key Figure or is there an easier way?

Hi.
You can use IP module to enter/update target KF.
Regards.

Similar Messages

Is it possible to add text field in condition type in PO?

Dear Guru,
Please kindly advice. Is it possible to add text field in condition type?
I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
So I would like to know is it possible to add text field in condition detail and how to set it up.
Thank you very much.

We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
Ex: Condition Type: ZZZZ Insurance
PO Print out show
Item No.          Desc                                                  Qty Unit Price Amount
10                 Item description                                  10000   10         100000
20                 Item description                                  10000   10         100000
30                 Item description                                  10000   10         100000
                     Insurance <<Description about insurance>>                  9,999
Edited by: Saiyaman on Oct 1, 2009 1:35 PM
Edited by: Saiyaman on Oct 1, 2009 1:36 PM

Is it possible to add Audio on Demand to an image in Captivate 7 QUIZ for html 5 output in web browsers?

We are trying to do a simple HEAR IT - SELECT IT type 'quiz' in Captivate 7 for an indigenous language project. Our target output is html 5 to web browser.
We have used the multiple choice question mode and have inserted IMAGES in place of text (although we left the question numbers visible)
The user should be able to click on a speaker icon to hear the audio file (as many times as they choose) and then select the correct image answer.
ALSO - Is it possible to add sound effects for a correct or incorrect quiz answer?
Thanks

Attaching audio could be done to the Success/Failure captions, rather easily.You can put a shape button on a question slide, other interactive objects are not possible (Buttons on Question/Score Slides in Captivate 6? - Captivate blog). And have that shape button pause before the pause of the question slide. Use an advanced action with the Statement 'Play audio'. Don't use a simple action, because it will release the play head: Why choose Standard over Simple action? - Captivate blog
User will then be able to click that shape button as many times as he wants, because the play head will remain at the pausing point. When he Submits the question, the two step process will use the pausing point of the Question slide: Question Question Slides in Captivate - Captivate blog
Lilybiri

Is it possible to add extra frames to the collage templates?

At the moment in using PSE10 Trail, and the maximum amount of frames i can see that i can use is 19, is it possible to add more???
Any help much appreciated
Georgie

You can use all of the frames in the content panel. After arranging your collage and clicking done, you need to save the file as a PSD file to preserve all the layers that were automatically created.
Then open Full Edit and click:
File >> Open
Then navigate to your PSD file.
If you open the layers pallet you will see that each photo in your collage has it’s own individual layer.
Select one of the layers (highlight it) then choose a from the content tab and click apply.
Click to view

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Hi,
I had the same problem with
"java.lang.NullPointerException at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.ViewContainerUIElementAdapter.getContent(ViewContainerUIElementAdapter.java:98)"
when I included ViewUsages dynamically in an action handler (outside wdDoInit()).
The code below fixed that problem.
This code creates a new OutboundPlug for the embedding view with the embedded view as target and fires the plug.
<i>// Create OutboundPlug
IWDOutboundPlugInfo outboundPlug = embedderViewInfo.createOutboundPlug();
//Create navigation link
rootViewUsage.createNavigationTarget(outboundPlug.getName(), interfaceViewUsage, "Default");
// fire navigation link
wdThis.wdGetAPI().firePlug(outboundPlug, Collections.EMPTY_MAP);
</i>
I hope I could help you. Probably you don't need the information anymore, but perhaps anybody else has the same problem.
Regards, Alex

Add project target programmatically

Hi all,
I am trying to add RT (cRIO FPGA) target programmatically to the project in similar manner as in "Add Files to Project.vi" LV in examples.
I've found some posts here dealing with adding folders/files but none of them mentions adding and configuring different targets and devices in project .
Any help would be greatly appreciated
jma

Hi jmaczak,
If we are talking about project API, I'm not sure whether you can do it with it (I have been playing for a while and without sucess). I found information saying:
"You can use Project API for:
Create a project
Save and load project from disk
Add or delete file or VI to or from the project
Use or modify Build Specification of the project"
This is it. Tough, It could be possible to add target to project in the way that you modify project as any other XML file.
the part you want to add looks similar to this one:
<Item Name="Master" Type="RT CompactRIO">
      <Item Name="Chassis" Type="cRIO Chassis">
            <Item Name="FPGA Target" Type="FPGA Target">
            </Item>
     </Item>
</Item>
Take it as extremely simplified tist of items and its properties - you can get better idea if you create some project manually and open it in some text editor.
I'm not sure whether it will help you to do what you need, but I hope that you don't have to spend hours investigating what you can achieve with project API
regards,
Martin Stefik

Jython code to add migratable target

Hi,
I am trying to add migrable target using following wslt jython commands:
edit();
startEdit();
cd('/');
jmsnode = cd('JMSServers/jmsnode1BL');
cd('/');
target = cd('MigratableTargets/ejbnode1_migratable');
cd('/');
jmsnode.addTarget(target);
save();
stopEdit('y');
Above code throws following exception:
Traceback (innermost last):
File "<string>", line 1, in ?
File "<iostream>", line 388, in save
File "<iostream>", line 520, in raiseWLSTException
WLSTException: Error occurred while performing save : Save failed: There are some invalid changes which need to be resolved. : weblogic.descriptor.DescriptorValidateException: The following failures occurred:
-- Since the JMS server jmsnode1BL or SAF agent is targeted to a migratable target, it cannot use the default store
How to set custom persistent store for a migratable target using python code ?
Could anyone please help ?
PS: Creation of JMS servers is done using JMX, but only addtarget is done python code.
Thanks,
Amal

Hi,
       First of all think about a simple design of creating two different flows with the help of infosurce. In transformation, give constant value to ZTYPE with different infosource and load the data. If that is not what you want(as i havent got your requirement properly, you can try the below thing.
It is not possible with only start routine. I think you will need to create an expert routine here. The code will be as below.
LOOP AT SOURCE PACKAGE into SOURCE_FIELDS.
   ASSIGN all source fields to RESULT_FIELDS.
   and add RESULT_FIELDS-<ZTYPE> = "INTERNAL"
   APPEND RESULT_FIELDS to RESULT_PACKAGE.
    Again assign all source fields to RESULT_FIELDS.
and add RESULT_FIELDS-<ZTYPE> = "EXTERNAL"
   APPEND RESULT_FIELD-<ZTYPE> = "INTERNAL".
ENDLOOP.
I hope this logic will help you.
Regards,
Harpal.

Is it possible to add markups to a PDF that I am not the author of

Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me). I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.
Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review.
Well, there is no Comments selection in my toolbar.   Second method is given by
Quickstart: Start an email review
An email-based review lets you track review status and merge received comments into the PDF.
Click Review & Comment and choose Attach For Email Review.
If prompted, enter your identity information to create a reviewer profile.
Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
But there is no Review & Comment button to click.
So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
Thanks in advance for your response.

To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is it possible to add a graphics card to the back of my HP

Hello I want to know if it's possible to add a new graphics card to the back of a Laptop not inside of it but on the back of my laptop ??? my graphics Card is a Intel 4000 graphics card is a terrible for gaming TERRIBLE !!!

Not sure where it would go on the back, but no the system is closed. There is no place to insert a graphics card or attach it. You will find some hokey stuff on the internet where people say you can plug a video card in the wireless card slot but those are a hoax at worst and at best they do not tell you that such a thing would not even perform as well as what you have and is likely to damage the motherboard.

Is it possible to add a backlit keyboard to an hp envy touchsmart 15

is it possible to add a backlit keyboard to an hp envy touchsmart 15?

Daevid.
Yes you can.
Your manual here.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
Page 20 chapter 3.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

I wanted to get a Ps4 soon but i dont have a tv, and on my computer i dont have a hdmi port. i see on other models of my computer they have it for example on the 23-d052 its like this
Where as on my one is like this
so that part is just an empty space. i was wondering if it were possible to add the hdmi port or if there was a way i could still play the ps4 on my computer?
This question was solved.
View Solution.

The USB 3.0 to HDMI adapter referenced above, is only designed to connect to a USB port on you computer and output an HDMI signal to an HDTV or monitor. It will not allow you to connect the HDMI output of a game console to your computer.
It may be possible to purchase all the components necessary to add that functionality to your computer, however the cost would far exceed the price of a new monitor or HDTV. Please purchase an inexpensive HDTV or monitor to use with your PlayStation.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Is it possible to add a new graphics card to my macbook pro 2011 13"

Is it possible to add a new graphics card to my macbook pro 2011 13"?

Hi W,
Sorry, but no. It's soldered onto the logic board.

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

Is it possible to add a target amount to a query

Similar Messages

Maybe you are looking for