Is it possible to add accented or alternate characters to the pop-up lists that appear when holding keys?

I like the ability to press and hold letter keys to get accented and alternate character options, and would like to add even more options. For example, holding the "D" key does not give any options, despite Đ/đ being used in many languages. I can type the letter by switching keyboard inputs (in my case, from U.S. to Serbian-Latin and then pressing "]"), but it would be so convenient to just press and hold "D" and then type "1" or click it.
I was thinking it would also be nice to customize the pop-up menus, for example to add Greek letters that are frequently used as mathematical symbols (α for a, δ for d, μ for m, etc), again to save time from going to the Character Viewer or having to remember a bunch of multi-key shortcuts. Any insight would be great. I imagine this could be useful to many people.
Thanks for your time,
Matt
Mid 2009 Macbook Pro 13" / OSX 10.9.5 Mavericks

M.C.K. wrote:
I was thinking it would also be nice to customize the pop-up menus
See this page for a link to info on how to do do this:
http://m10lmac.blogspot.com/2012/03/os-x-107-lion-customizing-character.html

Similar Messages

Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB) that is already in the iMac? A total of 24GB (2x4GB, and 2x8GB)

Purchasing the new 27" iMac
Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB) that is already in the iMac?
A total of 24GB (2x4GB, and 2x8GB)
upgrading memory on the new iMac 27"3.4GHz Quad-core Intel Core i7,
8GB 1600MHz DDR3 SDRAM - 2x4GB
3TB Fusion drive

You can do it without any problem, but make sure you put the memory horizontally, so you will get the advantages of the Dual Channel. You can buy the memory in OWC or Crucial to make sure you have a compatible memory

How do I delete the "Add-On" pop up box that appears when I start Firefox

Every time I open Firefox a pop up box appears for add-ons. It is blank and does nothing. I close it and other one appears and I close that, then firefox starts. It's not a big thing, but it's a pain. It does not appear when I start IE8.

You can try http://kb.mozillazine.org/Preferences_not_saved
You can also try to delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Is it possible to add text to a photo in the iPhoto software?

I am new to a mac computer and iphoto softward.
Previously I used windowns with ACDC editing software that included the facility to add a text description to a photo.
Is it possible to add tect to a photo in the iphoto software?

Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free
Watermarking apps can also add text to photos. Go to MacUpdate.com and search for "watermark" to get a list of potential candidates.
Also Preview's annotation capability can do the job as Larry has pointed out:
OT

Reply address: is it possible to use another reply address other than the pop address used in my account. I have a special work account and would like to send emails with that address as my reply address...or sent from address

Reply address: is it possible to use another reply address other than the pop address used in my account. I have a special work account and would like to send emails with that address as my reply address...or sent from address

i found out how to do this finally!
1) set up google gmail account to forward your emails to (from the [email protected])
2) go to your gmail account
3) go to settings (cog in right hand corner)
4) go to 'accounts and import'
5) go to 'send mail as'
6) click 'Add another email address you own' - add your [email protected] address
7) google will send a verification email with code to that email address.
8) enter code
9) go back to gmail account >'send mail as' and select 'make default'
10) close mac 'mail' program and reopen it.
as long as you have gmail account selected as the primary account in MAIL - mail will now come throught as being sent from that [email protected] address!!

I need to transfer playlists from my old iphone into itunes so that I can then add them to my new iphone 6. However, none of the playlists on my iphone appear when I connect to my macbook. I have read other threads but have not found answer. help!

I am a group exercise instructor and rely heavily on my playlists. My old phone is an iphone 4s and I just bought an Iphone 6. I also have a macbook where I keep my itunes account, but I create all my playlists on my phone. I need to transfer those playlists from my old iphone into itunes in my computer so that I can then add them to my new iphone 6. However, none of the playlists on my iphone appear when I connect to my macbook. I have read other threads where the suggestion was to attach the old phone to itunes, find the phone in itunes and click the little arrow to the left to show the playlists. Then right click on the playlist and export it, saving it to the desktop, to then import it into itunes. However, in my case, the playlists do not show up when the phone is connected to itunes. I have clicked on the little arrow and all I get is "music", "purchased", etc., but none of my playlists. I'm sure some years back I probably deleted something in my itunes library and now none of my playlists show. Please help me. I would hate to have to recreate all of my playlists. Thank you!

I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer

Is it possible to hide the yellow box that appears when you scroll over any object in the form?

Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

Hi,
Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
Try clearing that.
Bruce

I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

It may be your router is to old. Good read:
http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html

Is It Possible to Add a Fileserver to a DFS Replication Group Without Connectivity to FSMO Roles Holder DC But Connectivity to Site DC???

I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could.
I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member
to a replication group that's on a subnet without connectivity to the FSMO roles holder. I'll try to describe the
layout as best as I can up front.
The AD only has one domain & both the forest & domain are at 2008R2 function level. We've got two sites defined in
Sites & Services, Site A is an off-site datacenter with one associated subnet & Site B with 6 associated subnets, A-F.
The two sites are connected by a WAN link from a cable provider. Subnets E & F at Site B have no connectivity to Site A
across that WAN, only what's available through the front side of the datacenter through the public Internet. The network
engineering group involved refuses to route that WAN traffic to those two subnets & we've got no recourse against that
decision; so I'm trying to find a way to accomplish this without that if possible.
The FSMO roles holder is located at Site A. I know that I can define a Site C, add Subnets E & F to that site, & then
configure an SMTP site link between Sites A & C, but that only handles AD replication, correct? That still wouldn't allow me, for example,
to enumerate DFS namespaces from subnets E & F, or to add a fileserver on either of those subnets as a member to an existing
DFS replication group, right? Also, root scalability is enabled on all the namespace shares.
Is there a way to accomplish both of these things without transferring the FSMO roles from the original DC at Site A to, say,
the bridgehead DC at Site B?
When the infrastructure was originally setup by a former analyst, the topology was much more simple & everything was left
under the Default First Site & no sites/subnets were setup until fairly recently to resolve authentication issues on
Subnets E & F... I bring this up just to say, the FSMO roles holder has held them throughout the build out & addition of
all sorts of systems & I'm honestly not sure what, if anything, the transfer of those roles will break.
I definitely don't claim to be an expert in any of this, I'll be the first to say that I'm a work-in-progress on this AD design stuff,
I'm all for R'ing the FM, but frankly I'm dragging bottom at this point in finding the right FM. I've been digging around
on Google, forums, & TechNet for the past week or so as this has evolved, but no resolution yet.
On VMs & machines on subnets E & F when I go to DFS Management -> Namespace -> Add Namespaces to Display..., none show up
automatically & when I click Show Namespaces, after a few seconds I get "The namespaces on DOMAIN cannot be enumerated. The
specified domain either does not exist or could not be contacted". If I run a dfsutil /pktinfo, nothing shows except \sysvol
but I can access the domain-based DFS shares through Windows Explorer with the UNC path \\DOMAIN-FQDN\Share-Name then when
I run a dfsutil /pktinfo it shows all the shares that I've accessed so far.
So either I'm doing something wrong, or, for some random large, multinational company, every sunbet & fileserver one wants
to add to a DFS Namespace has to be able to contact the FSMO roles holder? Or, are those ADs broken down with a child domain
for each Site & a FSMO roles holder for that child domain is located in each site?

Hi,
A DC in siteB should helpful. I still not see any article mentioned that a DFS client have to connect to PDC every time trying to access a DFS domain based namespace.
Please see following article. I pasted a part of it below:
http://technet.microsoft.com/en-us/library/cc782417(v=ws.10).aspx
Domain controllers play numerous roles in DFS:
Domain controllers store DFS metadata in Active Directory about domain-based namespaces. DFS metadata consists of information about entire namespace, including the root, root targets, links, link targets, and settings. By default,root servers
that host domain-based namespaces periodically poll the domain controller acting as the primary domain controller (PDC) emulator master to obtain an updated version of the DFS metadata and store this metadata in memory.
So Other DC needs to connect PDC for an updated metadata.
Whenever an administrator makes a change to a domain-based namespace, the
change is made on the domain controller acting as the PDC emulator master and is then replicated (via Active Directory replication) to other domain controllers in the domain.
Domain Name Referral Cache
A domain name referral contains the NetBIOS and DNS names of the local domain, all trusted domains in the forest, and domains in trusted forests. A
DFS client requests a domain name referral from a domain controller to determine the domains in which the clients can access domain-based namespaces.
Domain Controller Referral Cache
A domain controller referral contains the NetBIOS and DNS names of the domain controllers for the list of domains it has cached. A DFS client requests a domain controller referral from a domain controller (in the client’s domain)
to determine which domain controllers can provide a referral for a domain-based namespace.
Domain-based Root Referral Cache
The domain-based root referrals in this memory cache do not store targets in any particular order. The targets are sorted according to the target selection method only when requested from the client. Also, these referrals are based on DFS metadata stored
on the local domain controller, not the PDC emulator master.
Thus it seems to be acceptable to have a disconnect between sites shortly when cache is still working on siteB.
If you have any feedback on our support, please send to [email protected].

Is it possible to add icons to a field in the table control ?

Dear Gurus,
Greetings..............
Is it possible to add icons to the line item of a field in the table control ?
Thanks in advance
Raj Kumar

HI
YES IT IS POSSIBLE.
DO THE FOLLOWING
1.DECLARE INCLUDE <ICON>.
2.IN YOUR INTERNAL TABLE DECLARE FIELD ICON
icon(4) TYPE c,
3. POPULATE YOUR INTERNAL TABLE WITH APPROPRIATE ICONS BY SELECTING FROM INCLUDE SPECIFIED ABOVE.
EG:
wa2-icon = '@5C@'.
4.PASS IT TO FIELDCAT
wa_fieldcat-fieldname = 'ICON'.
wa_fieldcat-icon = 'X'. " Displayed as Icon
wa_fieldcat-tabname = ' '.
wa_fieldcat-seltext = 'Status'.
wa_fieldcat-coltext = text-001.
APPEND wa_fieldcat TO it_fieldcat.

Is it possible to add a preloader to show while the graphics are loading?

I created a web site that has quite a few show/hide divs to work with the navigational menu on the left, which I believe is making the site load slowly. Is it possible to add a preloader to show up until the site is fully loaded?
The site originally had a flash movie that was set to load automatically. I removed this thinking it would make the site load quicker but it didn't help much.
Here is the URL: http://www.keystonewalls.com
Any advice?

I created a web site that has quite a few show/hide divs to work with the navigational menu on the left, which I believe is making the site load slowly. Is it possible to add a preloader to show up until the site is fully loaded?
What's making that page load slowly is the 57 hits on the server to request images, and the combined weight of those images (~3.3MB). Surely you don't need so many images. The menu could be done all text for starters. Note also that there is still a 120K Flash object being loaded. Add to this weight the incredibly voluminous CSS (oodles of absolute positioning), and the table-based approach, and you have made a simple layout into a lumbering behemoth!

Is it possible to add an all time member to the time dimension

We are on BPC 7. Our time dimension has the normal Year, Quarter, Month rollup.
Is it possible to add an "All_time" member to the time dimension that would have all years rolling up to it or are our only choices Year, Halfyear, Quarter, Month, Week, or Day?

TOTAL is not a valid selection for LEVEL. Did you create this "TOTAL" manually some how? I have seen "TOTAL" as a period but never a level. Do you have a dimension file that you can get to work with this example in APPSHELL that you could share?
According to the BPC Admin documentation it only comes with YEAR, HALFYEAR, QUARTER, MONTH, WEEK, DAY as valid options. How do you get the TOTAL member added as a valid option for the LEVEL property:
BPC Documentation Reference below:
LEVEL
Time can be a year, quarter, month, week or day. As described above, the PARENTH1 property is used to define the aggregation of the time periods.
The LEVEL property is also very important in defining your time periods. You must have the correct Level (Year, quarter, month, etc.) for each member. You must follow the chronological format throughout the Time dimension. The correct format is:
·        YEAR
·        HALFYEAR
·        QUARTER
·        MONTH
·        WEEK
·        DAY

In SharePoint 2013 navigation, is it possible to add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

If I want to add a custom link to the left-hand navigation menu In a SharePoint 2013 sub-site, it can be done by visiting
Site Settings à Navigation section and adding the link under
Structural Navigation: Editing and Sorting section. However, this will automatically add a matching link to the top menu as a dropdown.
(Note that Global Navigation is set to “Display the same navigation items as the parent site” where “Parent is using Structural Navigation.” and Current Navigation is set to “Structural Navigation:
Display only the navigation items below the current site”)
Is there a way to just add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

Hi Asanka,
Please refer the below link which may help you to resolve your problem.
http://blog.navantis.com/configuring-sharepoint-2013-navigation-to-span-site-collections/
If its not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Reseting the pages that appear when you add a tab

So i am talking about the sites that appear in boxes when you press the open a tab button. 9 boxes with the 9 most popular sites you visit.
I am not sure how exactly that is called so i couldnt find the answer through google.
Is there anyway to reset only that? I could reset the entire profile but i dont want to lose passwords/preferences etc

Not sure what you mean by "reset" the new tab page. The 9 items displayed on the New Tab Page are automatically determined by the history that you keep in Firefox.
You can add, delete, pin sites on that page. Does any of the following help?
*https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites
You can also try this add-on:
*https://addons.mozilla.org/en-us/firefox/addon/new-tab-tools/

Is it possible to add a button with image on the title bar(IDR)?

I look through all the buttons in the example, All of them does not with an image on them.
Is it posslbe to put a image on the title bar?
Best regards?
Blake Le

hi, Julia,
Sorry for the misleading. I want to add a button below the IDR area. And for common button it's OK.
Now the situation changed , i need to add an icon to a button , to make the user interface more beautiful.
Is that possible?
Best regards,
Thanks very much for your help.
Blake Le

Is it possible to add accented or alternate characters to the pop-up lists that appear when holding keys?

Similar Messages

Maybe you are looking for