Is it possible to add an all time member to the time dimension

We are on BPC 7.  Our time dimension has the normal Year, Quarter, Month rollup. 
Is it possible to add an "All_time" member to the time dimension that would have all years rolling up to it or are our only choices Year, Halfyear, Quarter, Month, Week, or Day?

TOTAL is not a valid selection for LEVEL.  Did you create this "TOTAL" manually some how?  I have seen "TOTAL" as a period but never a level.  Do you have a dimension file that you can get to work with this example in APPSHELL that you could share?
According to the BPC Admin documentation it only comes with YEAR, HALFYEAR, QUARTER, MONTH, WEEK, DAY as valid options.  How do you get the TOTAL member added as a valid option for the LEVEL property:
BPC Documentation Reference below:
LEVEL
Time can be a year, quarter, month, week or day. As described above, the PARENTH1 property is used to define the aggregation of the time periods.
The LEVEL property is also very important in defining your time periods. You must have the correct Level (Year, quarter, month, etc.) for each member. You must follow the chronological format throughout the Time dimension. The correct format is:
·        YEAR
·        HALFYEAR
·        QUARTER
·        MONTH
·        WEEK
·        DAY

Similar Messages

  • Is it possible to add more than one page at a time in pages - word processing?

    Is it possible to add more than one page at a time in pages - word processing?

    I haven't been able to find a way to add more than one page at a time.  I think you'll have to add them one at a time. 

  • I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

    I bought a new iMac today. I'm using migration assistant to move all my software, but the time just keeps getting longer. It says connect an Ethernet cable for faster data transfer. I did, but that doesn't seem to help. Any ideas?

    m1doc,
    Are you migrating from a Mac or a MS Window machine? Either way you probably should be in touch with AppleCare, you have 90 days of free AppleCare telephone support. They can usually help on issues like this. If you don't know the phone number please use http://support.apple.com/kb/HE57 to help find the number in your country.

  • Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB)  that is already in the iMac?   A total of 24GB (2x4GB, and 2x8GB)

    Purchasing the new 27" iMac
    Is it possible to add 16GB (2x8GB) of ram to the stock 8GB (2x4GB)  that is already in the iMac?
    A total of 24GB (2x4GB, and 2x8GB)
    upgrading memory on the new iMac 27"3.4GHz Quad-core Intel Core i7,
    8GB 1600MHz DDR3 SDRAM - 2x4GB
    3TB Fusion drive

    You can do it without any problem, but make sure you put the memory horizontally, so you will get the advantages of the Dual Channel. You can buy the memory in OWC or Crucial to make sure you have a compatible memory

  • Is it possible to add text to a photo in the iPhoto software?

    I am new to a mac computer and iphoto softward.
    Previously I used windowns with ACDC editing software that included the facility to add a text description to a photo.
    Is it possible to add tect to a photo in the iphoto software?

    Some Image Editors That Support layers:
    Photoshop Elements 11 for Mac - $79
    Rainbow Painter - $30
    Imagerie - $38
    Acorn - $50
    Pixelmator - $60 
    Seashore - Free
    GIMP for Mac - Free
    Xee 2.1 - free
    Watermarking apps can also add text to photos.  Go to MacUpdate.com and search for "watermark" to get a list of potential candidates. 
    Also Preview's annotation capability can do the job as Larry has pointed out:
    OT

  • Is it possible to check automati all bookmarks, and delete the not working bookmarks

    Is it possible to check automatic all bookmarks, and delete the not working bookmarks

    Try this extension:
    *CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

  • My captured video is all mixed up in the time line after capture

    hi after i capture my video it gets all mixed up in the time line nothing is in the right order and it is all cut up. I don't know what happened I have successfully exported a video to idvd before and published it but when i tried to again this happened
    if anyone can help thanks

    I have the identical issue. Open a project that was fine 12 hours earlier. Now I open the project and all my clips and subclips show up in the browser, but the timeline is empty. Click on sequence 1 - empty. I tried switching my scratch disk from the original external drive to another one that was a mirror copy of the first - changed the scratch disk location. Then had the issue with no sequence data in the timeline. Reverted to original external drive and scratch disk location. Same problem - no sequence data. I can open other previous projects and they're fine. I don't have multiple sequences in my projects - I just build in the timeline, if that has anything to do with the problem. This is very strange. Appreciate any help anyone has.

  • Is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

    is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

    The dpi depends on the print size you'll be making. This explains it in detail:  The Myth of DPI.
    A 300 dpi image for a 4x6 print will have fewer pixels in it than a 300 dpi image for an 8. 10 print. 
    You can set the pixel dimension of a photo by exporting it via the File ➙ Export ➙ File Export menu option and use the Custom size setting.  However, you should crop the photo to the size ratio you want before exporting, i.e 4 x 6, 5 x 7, etc.  Then set the maximum pixel size you want for the image:
    OT

  • News feed on my Facebook app doesn't show the correct time. Can the time be set?

    News feed on my Facebook app doesn't show the correct time.  Can the time be set?

    Does your phone show the correct time?
    If not, change the time on your phone, see if it helps.
    If it does, then sign out, sign back in. If that fails, the delete and reinstall. If that fails, then contact Facebook, as they're the developers of the app and will have the proper documentation to help you further.

  • Abap run time error at the time of GR

    I am facing a ABAP run time error at the time of  GR of STO through MIGO_GR, then abap run time error is generated, details are given as per the Tcode:- ST22;
    Runtime Error          MESSAGE_TYPE_X
    ShrtText
       The current application triggered a termination with a short dump.
    What happened?
       The current application program detected a situation which really
        should not occur. Therefore, a termination with a short dump was
        triggered on purpose by the key word MESSAGE (type X).
    Transaction
       Transaction......... "MIGO "
       Program............. "SAPLMBWL"
       Screen.............. "SAPLMIGO 0001"
       Screen line......... 15
    Information on where terminated
         The termination occurred in the ABAP program "SAPLMBWL" in
         "MB_POST_GOODS_MOVEMENT".
         The main program was "SAPLMIGO ".
         The termination occurred in line 56 of the source code of the (Include)
         program "LMBWLU21"
         of the source code of program "LMBWLU21" (when calling the editor 560).
    Source Code Extract
         55    IF NOT sy-subrc IS INITIAL.
    >>>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
         57                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

    Hi Tiwari,
    The error seems to be triggered by note 385830. Pls refer to 'Note 556000 - Short dump due to note 385830' in www.service.sap.com
    Btw, which version are you in?
    Best Regards
    Sathees Gopalan

  • My time capsule change the time on ALL my files by one hour.

    On the 29th December all the files on my time capsule went out of sync with my mac by one hour. I use it for backup. I have other backups on a Lacie drive and these were all OK but because it went forward in time my syncronise software saw them all as changes and started copying from the time capsule to my iMac. I stopped it and after recovering the damage it had done I proceeded to copy ALL my data back to the time capsule to reset the syncronise error.
    Its been OK since then but this morning it all went wrong again. It started by my backup failing because the network share was not accessable so I went into my backup scripts(chronosync) and reselected the backup drive. I then did a trial sync and lo and behold the whole lot is back out of sync again and this time they have gone back in time.
    Did we enter British summer time in the middle of winter or did the earth tilt on its access and caused the UK to be in The NEtherlands? Or did Apple do something that I cant resolve.
    Anyone else having similar problems? Ive been googling this and thought I had found it by installing Airport Uitlity 5.6 but I cant do that as I have upgraded all my machines to MOuntain Lion and its not compatible. I think on 5.6 you can adjust the time zone setting.
    I need to tell the time capsule which time zone it is in and all shoudl be OK

    Bob
    Thanks for that   - Airport utility 5.6 is now working but I cannot see anything wrong. It possibly went wrong on the 29th December and has just gone back to normal again so I think I will have to let the backup recopy all the files.
    I looked in the logs and found
    No Address for NTP server time.apple.com. and then on Jan 08 at 09:49:38 I got
    Clock synchronized to network time server time.apple.com (adjusted +3597 seconds). (thats my hour!!!)
    Question no is why - could be a DNS problem but why on the 29th and back on the 8th Jan.
    Nothing changed in my network router, maybe something at the ISP.
    Anyway now copying all the data back to the time capsule.
    By the way I have my DNS as my router 192.168.1.1 and 208.67.222.222 - when I look at my router the DNS is 8.8.8.8 and 4.4.4.4 which is what my ISP told me to use. Maybe I should put 8.8.8.8 and 4.4.4.4 in the DNS for the time capsule?

  • Can I add a NAS via ethernet to the Time Capsule network?

    "I'm a PC," but am sick of spending all my time with Windows/Network conflicts and am getting ready to take the plunge into the Mac world (insert applause here).
    My router/switch is old, and I want "n" wireless capability, so my plan here is to go whole hog and buy a Macbook Pro, an iMac, and a brand new network infrastructure including the 2TB Time Capsule. This way I will stay completely within the Apple family.
    I have a Netgear ReadyNAS 2TB that I would like to have available as a second back-up drive on the network. It can only be on the network via ethernet (LAN). It cannot be plugged into the Time Capsule's USB port.
    Will I be able to add this drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
    Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
    Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
    Thanks for any help anyone can offer,
    Shawn

    BroncoCountry wrote:
    Will I be able to add this [NAS] drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
    It's reasonable to expect your NAS drive to work when connected to your Time Capsule network. However, it will be difficult for you to use it for Time Machine backups. Apple only supports Time Machine network backups to the disk in a Time Capsule.
    It's easy to have multiple computers backing up via Time Machine to the same Time Capsule.
    Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
    That's up to you. Keep in mind that Apple still doesn't want you to use that USB drive for Time Machine backups.
    Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
    Yes.

  • Is it possible to add a preloader to show while the graphics are loading?

    I created a web site that has quite a few show/hide divs to work with the navigational menu on the left, which I believe is making the site load slowly. Is it possible to add a preloader to show up until the site is fully loaded?
    The site originally had a flash movie that was set to load automatically. I removed this thinking it would make the site load quicker but it didn't help much.
    Here is the URL:  http://www.keystonewalls.com
    Any advice?

    I created a web site that has quite a few show/hide divs to work with the navigational menu on the left, which I believe is making the site load slowly. Is it possible to add a preloader to show up until the site is fully loaded?
    What's making that page load slowly is the 57 hits on the server to request images, and the combined weight of those images (~3.3MB).  Surely you don't need so many images.  The menu could be done all text for starters.  Note also that there is still a 120K Flash object being loaded.  Add to this weight the incredibly voluminous CSS (oodles of absolute positioning), and the table-based approach, and you have made a simple layout into a lumbering behemoth!

  • Can I add a USB hard drive to the time capsule

    I am wanting to know if one could add an external HD to the USB port on the time capsule? 

    You might be able to. If you want to transfer the contents of one to the other, you will have to do that via your computer. But, if you wanted to increase memory space, then maybe. Try looking it up in the Time Capsule Manual.
    P.S. It does say you can connect USB drives to it.

  • Not picking all open items at the time of out going payment(F-53)

    Dear Experts,
    I'm facing the issue at the time of out going payment(F-53)
    At the time of vendor line item display system is showing open items but at the time of out going payment(F-53)
    system is not picking the all open items it is picking only two items
    Pls help
    Regards
    Hari Prasad

    Hi Experts,
    Thnx for Quick response
    As per your instructions, I checked auto payment run here we have done successfully for vendor
    Open items shown in FBL1N but these open items not coming at the time of  out going payment
    I checked SPL GL indictors also
    Regards
    Hari Prasad

Maybe you are looking for