Is it possible to add fields in field catelog

Hi,
Pl inform is it possible to add field as per requirement in field catelog.
which is used for picking fields for condition table.

Hi,
Use user exit adding fields to field catlog.
USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMK communication structure (header fields), which have not been provided in the standard SAP system. These fields can also be used for pricing in the billing document.
This user exit is described in detail in the "New fields in pricing" section.
USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMP communication structure (item fields), which have not been provided in the standard SAP system. These fields can also be used for pricing.
Reward points if useful
Regards,
Amrish Purohit

Similar Messages

Is it possible to add new screen fields to the transaction /dsd/sl_cockpit

HI experts,
Would like to know if it is possible to add new screen fields to the cloned version of /dsd/sl_cockpit.
I cloned the original transaction /dsd/sl_cockpit into a diff. name, now I want to know how I can include/ add those new fields to this transaction. It looks like the screen is dynamically built using Standard ABAP classes. Need help.
Thanks in advance

it is not possible to add new fields via badi on /dsd/sl_cockpit.

Is it possible to add a new field in Block/Unblock vendor screen?

Hi Experts,
Kindly any one advise is it possible to add new field in xk05 screen as shown in the attached screen.If possibe,please advise the possible steps
to add this new field.
Thanks & Regards,
Anusha

Hi Pavan,
Thank you for your reply.I have searched for user exits there is no screen exit of xk05 and I put a break point in CL_EXITHANDLER method and I found VENDOR_FIELDSTATUS BADI only for this screen.So,there is no BADI or user exit to add a new field to this screen.So,how to add
a new comment field to this XK05 screen.
Rgds,
Anusha

Is it possible to add value date field in the debit entry?

Hi gurus,
I'm an abapper and struggling to be an FI consultant since I have no one to consult with. Here's my issue:
I want to add the Value Date field in a GL acct debit entry. I used optional in Field status group. It doesn't appear unless if I change the posting key to credit. But if I change it to required entry, an error appears " Rules for posting key 40 and acct 115-30-002 set incorrectly for "VALUT" field . Did I miss anything? As much as possible, I don't want to use the other GL Account (a credit entry) since I dont need it in the program flow.
Need an expert explanation on this. Sorry I only have limited knowlege with regards to FI concepts.

Hi
Feild status at entry time looks for the following combination
S- Supressed
D- Display
R- Required
O- Optional
System looks for this above combination at first in Posting Key and then in FSV of account which we enter. For this partical purpose the the feilds in posting key are kept optional.
Check the feild status of posting key & account T-code FBKP.
thanks
Colin Thomas

Is it possible to add a time field to a booking?

I want to use the booking module for private consultations based on time. I would like to have different hourly slots available for people to reserve their desired time, but there is no time field on the booking module. Does anyone have any idea how I could do this?

Hi Guys,
I have recently developed a booking functionality using a webapp and then tied it into the event module so I can utilise the pre event and post event email tools.
What your requiring is basically a form to give users an option for time. If you build the webapp so it ties into the event module and then build a form in which the user can specify a time slot i believe that should solve the problem.
The booking module is for events so we use it to display seminars / networking events etc.
Hope that helps.

Is it possible to add a field in Attachment screen?

Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
David

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

How to add a computed field to a reports

I have a report where I would like to add a column that is the sequence of the row. It is not the rownum in the db, but I want it to be a row number for what is returned.
So, if I return 10 records, I would like a column to contain 1 through 10 to depict the row number.
I do not want to have this number in the table or view.
Is it possible to add a computed field to a report like this?
If so, how?
Thanks - Jim

The SQL function rownum should suffice if the report is not too complicated, as this returns the number of the row rather than the database row ie.
select empno,ename,rownum
from emp
add some clauses each time and you should see that each row is always numbered 1 to n.
However, if you introduce the HTMLDB column sort functionality into the report then it would appear that it is the result set that is sorted rather than a new query being issued.
Hope this is of help.

QA11- to add new user field

Dear Gurus,
In the t code QA11 , In the inspection lot stock TAB , In quantity posted to unresticted , Document tab is there, inwhich additinal text can be entered, Is it possible to add two more fields example GRADE .? IS it possible to update this characteristic in MSC2N in classification tab.
The user is asking that while reult recording they decide the grade , so they are asking for a field as i explained, such that when they change the charaterisctic it should update the MSC2N .
Please help in knowing the possiblity?
Is there any User exit
Thanks in adance

Did you try to implement the class characteristic?
The class characteristic could be suitable for your requirement and it is SAP standard scenario.
(The inspection results are transferred automatically to batch classification value.)
Regards
Luke

Is it possible to add PERNR field to MIGO or MB1A transaction screens?

Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
Satish

Hi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab

Is it possible to add a field to OKEK in configuration SCREEN?

Hello SAPPERS,
I would appreciate if someone could provide some input on the following issue.
Is it possible to add a field to Define Account Determination for Internal Goods Movements (OKEK)?
This table determines the GL accounts assigned when inventory is moved between plants. Is it possible to add another column to the left hand side? I would add the receiving plantu2019s VGCd, if possible. Even better would be a profit center group (1100 for all 11xx profit centers for example).
I know there are two ways to add field to the DB Table. They are INCLUDE and APPEND structure.
Is it possible to append a field to table V_T8A00, and display it in config screen OKEK?
Thanks for any advice

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Is it possible to add text field in condition type in PO?

Dear Guru,
Please kindly advice. Is it possible to add text field in condition type?
I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
So I would like to know is it possible to add text field in condition detail and how to set it up.
Thank you very much.

We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
Ex: Condition Type: ZZZZ Insurance
PO Print out show
Item No. Desc Qty Unit Price Amount
10 Item description 10000 10 100000
20 Item description 10000 10 100000
30 Item description 10000 10 100000
 Insurance <<Description about insurance>> 9,999
Edited by: Saiyaman on Oct 1, 2009 1:35 PM
Edited by: Saiyaman on Oct 1, 2009 1:36 PM

Is it possible to add icons to a field in the table control ?

Dear Gurus,
Greetings..............
Is it possible to add icons to the line item of a field in the table control ?
Thanks in advance
Raj Kumar

HI
YES IT IS POSSIBLE.
DO THE FOLLOWING
1.DECLARE INCLUDE <ICON>.
2.IN YOUR INTERNAL TABLE DECLARE FIELD ICON
icon(4) TYPE c,
3. POPULATE YOUR INTERNAL TABLE WITH APPROPRIATE ICONS BY SELECTING FROM INCLUDE SPECIFIED ABOVE.
EG:
wa2-icon = '@5C@'.
4.PASS IT TO FIELDCAT
wa_fieldcat-fieldname = 'ICON'.
wa_fieldcat-icon = 'X'. " Displayed as Icon
wa_fieldcat-tabname = ' '.
wa_fieldcat-seltext = 'Status'.
wa_fieldcat-coltext = text-001.
APPEND wa_fieldcat TO it_fieldcat.

Me21n - account assign - is it possible to add field ?

me21n -> account assign - is it possible to add field ?
is there any standart exit ?
i know about the optin to add fields in my own screen
( MM06E005 ) .
i need it becouse i can't inforce ( display message )
the user to insert value in my own subscreen .

hi
I have the same requirement of adding a new field in account assignment. Please let me know if you are done with that or you have any infor regarding user-exit/BADI.
Thanks
Alok

How to add an input field in the web UI of CRM 2007

Hi everybody.
I want add an Input field in the Web UI Screen. How it is possible.
I want get the information with detailed descriptions if possible with screen shorts.
What type of methods it will be generated and what are the code we entered in those methods.
Take according to any example. But with detailed description.
I am new for the CRM 2007. So, please give the screen shorts with proper data.
Not only adding the field. If any data i entered in the adding field then that will be stored in the tables otherwise no use by adding the field.
So, Can anybody please send a proper information according to this.
Here another one How to Add our own table (Ztable) field in the Web UI Screen.
How to add the same field in the BOL.
Please expalin about those concepts with full of screen shorts messages.
Thank You.
Regards,
Krishna.

If you want to add extra standard fields (like one you mentioned), you can use Component Workbench and Copy the configuration and create your own configuration and make the "Available Fields" appear there.
If the standrd field is not available, you can Add Context Node using wizard and make it visible.
If its a custom field (a new one); you will have to use EEWB and add the fields and then make it visible in the UI using Component Workbench.
Regards,
Alin

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

Is it possible to add fields in field catelog

Similar Messages

Maybe you are looking for