Is it possible to add Master Clip Effect to Merged Clips?

I am currently unable to add a master clip effect to a merged clip in Premiere or Speedgrade.  At this point I realize I should have tested this, but it seemed to me that those syncing audio to video might also want to color correct the clips too.
Is there a way to get back to the master video clip for using the MCE?  Otherwise I'm back to the clip-by-clip color adjustment (and copy from pervious).  Am I wrong in assuming merging clips is more trouble than it's worth?
Thanks,
Rob

At this point of time, MCE will not have effect on merged clips coming from Premiere. It's a known Mac issue we are working on.
Thanks,
Fran

Similar Messages

  • Is it possible to add a clip to multiple videos automatically?

    There are a few videos, lets say 10, that I want to add a short clip to the end of, before compressing them for web streaming. Is it possible to have Compressor add these clips before compressing them down in filesize?
    Or would I have to add each clip manually in Final Cut Pro first, then compress them with Compressor?

    Or, you can use QT Pro to concatenate files. Open up the file you want to add to all the others and copy it.
    Then open up each file in QT player, move the playhead to the end of the file and select "Add to Movie" from the menu. Then save it.
    x

  • How to add more track effects?

    Basic Track allows only 4 effects "modules" in the Edit column at the right. Noise Gate and Compressor at the top and Visual EQ at the bottom cannot be deleted. So it's possible to add only 4 effects. Is that correct? I need more!

    That's correct. If you need more, you'd have to export and re-import the track, of course you'll lose the ability to change the effects you used in the first pass.

  • How do I add a video effect to multiple clips in my timeline at once?

    How do I add a video effect to multiple clips in my timeline at once?

    or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

  • Is it possible to add a video clip to an allready created multicam video

    First i'm totally new to Final Cur Pro x. Is it possible to add a videoclip to the multicam file i've created ? I've created a multicam file with 2 angles and got them aligned manually cause FCP couldn't do it right. Anyway now i want to add a third angle is that possible.

    Well this trick did it :-)
    Multicam: Add additional clip?
    Thanks for your suggestions

  • Can i add a visual effect to just a section of a clip and how do i do this?

    Can i add a visual effect to just a section of a clip and how do i do this?

    Here is how I would do it.
    1) Drag the clip into your project, if it isn't already.
    2) Select those frames that you want to apply the effect by dragging. They should be enclosed in a yellow border.
    3) Right click within this yellow border and select "Split Clip"
    4) You can now apply the effect to this section.

  • If I edit an item in a datagrid is it possible to add an effect to that entire row?

    If I edit an item (default ItemRenderer) in a datagrid is it
    possible to add an effect to that entire row?

    If you are using the mail app - Tap and hold down on the attachment icon in the email and that should bring up a window that says Open In. Do you not get that? Then you can select Pages from that window - assuming that you have Pages on the iPad.
    The attachment should open when you tap on it anyway, even if you don't have Pages.

  • Add some audio effect to master track in Premiere pro CC

    How can I add some audio effect (i e multiband compressor) to master track in Premiere pro CC?

    Pg 523.
    Use offline Help in Adobe products

  • Applying effect to multiple master clips in bin

    Basically I would like to apply the timecode reader effect to multiple master clips in a bin so that I can batch export those clips to an external drive for the director to take and watch at home.
    I know how to apply an effect to multiple clips in a timeline, but is there a way to do it right to multiple master clips in a bin?
    Right now my process is to duplicate the clips for a scene as new master clips in a separate bin, one by one apply the timecode reader (as favorite effect) to each clip, then batch export those clips to the external drive.
    As I get to the scenes with many many clips, applying the effect gets a bit tedious. Just hoping there's a faster way I'm not thinking of or unaware of.
    Thanks.

    It always seems like a strange thing to do, but the standard for these kinds of things seems to be to put everything on the timeline, apply the effects (you know how), and then drag them off the timeline into a fresh bin.
    It's very quick and does the job just fine, but always somehow feels.. wrong.
    If there were a way for a timecode reader to be applied by Compressor, then it would be much more of a batch thing. But I don't think there is.

  • Accessing master clip effects

    Hi all.  The new CC master clip effects feature is a pretty slick and has lots of possibilities.   However, I can't seem to figure out how to access the effect once its been applied.  I've seen several tutorials where the editor simply clicks on the source clip in the source monitor to open up the effect controls for the applied applied clip.  This doesn't seem to work for me at all.  Can I maybe access the effects controls for the master clip effect from the project panel?  Any advice?
    Thanks,
    Richard Angle

    The Effect Controls Panel is now focus sensitive in a way that it wasn't before the master clip effects feature was added.
    When the Source Monitor has focus with a master clip loaded, the ECP loads that master clip. To load a master clip in the Source Monitor, you can either double-click it in the Project panel or use Match Frame from the Timeline.
    When the Timeline has focus and a single track item is selected there, the ECP loads that track item. With a track item loaded, the ECP always shows the "intrinsic" effects: for Video, Motion, Opacity, and Time Remapping; for Audio, Volume, Channel Volume, and Panner.
    Setting focus on panels other than a Timeline or the Source Monitor has no effect on what's loaded in the ECP.

  • Master clip effects applied when replacing clip into after effects?

    Hi Guys,
    Love the new Master Clip effects in Premiere 2014 but im wondering what happens to the effects if I replace the clip in my timeline into an After Effects clip? Will the effects applied to the master clip be disabled for that new AE clip ?
    Best,
    Patrick

    Hi,
    Which effect are you trying to apply?
    Are you making subclips before applying the effect on the Master clip?
    You can apply the effect on the Master clip and then make subclips from it. It will work for you.
    Please refer the link below for more info:-
    http://helpx.adobe.com/premiere-pro/using/master-clip-effects.html
    Thank you.

  • CREATING NEW/Duplicate Master clips

    Hi Guys...me again. I've been reading the manual all weekend...and decided that, since I SCREWED with this compressor thing...that I'd try to prevent the problem from happening again. I need to know if I'm on the right track.
    I'm working on a video of our show (animal show) and I am creating a dozen or so "mini clips" in the timeline, one for each animal segment, each contains a/b roll, effects, etc. I DO NOT have these clips linked togeter yet...I've left a gap in the timeline between each clip, in order to grab and move them around as I see fit.
    I was thinking...(a dangerous past-time for me) that "Gee, Mark, wouldn't it be swell if I could make each of these little animal clips into independent clips, so if I screw up, or have to go back and tweak it later...I don't have to deal with this **** compressor and ripping apart my work? ".
    SO...I read the manual, and it seems that I can do this. The option in the menu is to make an independent clip, but when I highlighted my video/auido files in the clip area, and clicked the independent clip button, nothing happened. Does this mean that it recorded it somewhere on my project drive? i could not seem to find it. Also, should I just Modify it by making a New/Duplicate Master CLip?
    Does this sound like I'm on the right track?
    I'm just trying to prevent my "other" (freakin' compressor) issues from having to happen again.
    THANKS AGAIN!
    MW

    No. That is not what it means.
    Make independant clip removes the link between the timeline clip and the clip in the browser that the timeline clip came from. In otherwords, it will keep you from matching back to that clip in the browser.
    I don't know what issues you have with compressor, but if you want your segments to be self contained clips, export them as self contained quicktimes (using Export QuickTime Movie... leave it at Current Settings... and set Self Contained). Then you can bring them back in and arrange them in your timeline as you see fit, they will be entirely self contained...
    Patrick

  • Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

    Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

    Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
    First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
    Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
    I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
    Hope I'm making sense...

  • How do i hide a connected clip so that i can see the master clip underneath?

    I am attempting to finalise a wedding video.  For some reason the XML output gets scrambled in the transition between Final Cut Pro X and Resolve, losing all the in/out points in those clips which were part of two continuous hour-long movies (the master clips).  The audio was scrambled at the same time.
    So I have reconstructed the clip sequence in Resolve, restoring the correct in/out points and I have removed the audio altogether.  I cannot export this back to FCP because the in/out points get scrambled again, so I have exported the timeline as a quicktime movie.
    Now, in FCP Pro X, I have the Quicktime movie sitting as a connected clip above the original FCP Pro X timeline.  But it is not quite in synch and I guess the edit points are not always frame for frame correct.  To match up the new and old timelines I would like to be able to turn the connected clip on and off - but I can't see how to do this and I am not sure it is even possible.
    I can skim the master track but this is very cumbersome.  Is there any way to turn off the connected clip as one would do in a normal editor with tracks?  Or is there a better way to align various points in the two tracks?

    Ha. great!  Thanks for that.  I did know that!  But I couldn't find it by searching the manual and I have spent the last week immersed in Resolve so I have forgotten all the FCP shortcuts already...

  • Is it possible to add Audio on Demand to an image in Captivate 7 QUIZ for html 5 output in web browsers?

    We are trying to do a simple HEAR IT - SELECT IT type 'quiz' in Captivate 7 for an indigenous language project.  Our target output is html 5 to web browser.
    We have used the multiple choice question mode and have inserted IMAGES in place of text (although we left the question numbers visible)  
    The user should be able to click on a speaker icon to hear the audio file (as many times as they choose)  and then select the correct image answer.
    ALSO -  Is it possible to add sound effects for a correct or incorrect quiz answer?
    Thanks

    Attaching audio could be done to the Success/Failure captions, rather easily.You can put a shape button on a question slide, other interactive objects are not possible (Buttons on Question/Score Slides in Captivate 6? - Captivate blog). And have that shape button pause before the pause of the question slide. Use an advanced action with the Statement 'Play audio'. Don't use a simple action, because it will release the play head: Why choose Standard over Simple action? - Captivate blog
    User will then be able to click that shape button as many times as he wants, because the play head will remain at the pausing point. When he Submits the question, the two step process will use the pausing point of the Question slide: Question Question Slides in Captivate - Captivate blog
    Lilybiri

Maybe you are looking for