Is it possible to add memory to a Mac Mini?

That's the question. If I buy a Mac Mini and later discover that I need more memory, can it be added at that time? Can I do it myself?

Go with Crucial or Other World Computing. Kingston's works well on PCs but their record on Macs is spotty.

Similar Messages

  • How do I add memory to my mac pro

    How do I add memory to my mac pro?

    www.apple.com/support/macpro
    www.macsales.com/memory/macpro
    Find the Mac Pro model, type of RAM, then compatible RAM.
    But you get further if you show some details of what you have now and plan for.
    www.macperforomanceguide.com - check articles on memory and performance

  • Is it possible to use multiple displays on mac mini?

    Is it possible to use multiple displays on mac mini?
    I have a mac mini that I think is from 2009. The processor is 2.26 GHz Intel Core 2 Duo and 2 gb memory that I´d like to use with multiple displays (2). Is this possible??

    Baddoll wrote:
    Is this possible??
    yes.
    connect monitor #1 with the Mini DVI to DVI adapter (should have come with your Mini)
    connect monitor #2 with the mini-displayport to DVI adapter (needs to be procured separately)

  • Can I install more memory on a mac mini

    Can I install more memory on a mac mini?

    Welcome to Apple Support Communities
    Of course. You can upgrade the RAM always that you do not have a Late 2014 Mac mini (I am not sure that you can install more RAM, and if you can, it will void the warranty), and you can purchase more RAM at OWC or Crucial.
    See -> Mac mini: How to remove or install memory - Apple Support

  • What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

    What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

    Its worth confirming what free space you have on your drive: 
    go to:   Apple Menu > About this Mac >  More Info > Storage
    The bar chart shows how much free space there is on the drive:
    Please realise that partitioning does not create extra space so this wont help you.
    If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

  • Need to upgrade memory in ppc mac mini

    Does anyone know of a step by step guide with pictures to installing memory in a ppc mac mini? Need to upgrade to a gig to use some graphics software. Thanks,
    Steve

    In sleep mode (STR) the RAM has to be refreshed to
    keep the memory content, so the more you got the more
    power will be consumed on this.
    Having less ram will therefore benefit battery life
    in sleep mode.
    This is only of concern to portable users of course, and the additional RAM has barely any impact on power demand whether from mains-power or battery. Some admittedly, but not much. Nor would it be all that easy to tell what drain it caused since there are other variables involved with battery drain rates too, such as ambient temperature.
    There is still room for improvement in whatever
    algorithm it is that determines when "inactive"
    memory is released. Paging frequently happens after
    copying large files since all memory is in use and
    "recently" so, even if this use is one where the
    content is NOT likely to be needed again.
    The much hyped idea that "old" inactive memory is
    being released when more is needed I find it
    difficult to confirm, or paging would not be needed.
    Simply caching EVERYTHING does not in my mind count
    as an "intelligent" algorithm..
    As much as this may be valid, there is no way the user is able to change the algorithm - it's part of the operating system. As such, the user can really only take such steps as may be possible to improve the working of the system - one significant such step being adding RAM.
    This can be cleared up by running "repair
    permissions" in DU, since it seems to release much of
    the inactive RAM. It would be much better to have a
    small utility to do this, though, if making the OS
    more intelligent is not an option.
    Running disk utility may be an effective method of resolving memory allocations etc, but it then places the onus on the user to monitor the system and manually activate a process. Part of the appeal of MacOS to many people is that it removes much of the onus users of other operating systems feel is placed on them to keep tuning the system - activities which detract from the use of the system.
    Ultimately, I have to say that I have never found the need to do anything of that sort. I do use MenuMeters (a very neat little app to place system monitoring tools in the menu bar and which uses barely any CPU overhead to do so) to watch the status of my system, but only as an occasional troubleshooting aid when I'm testing software or experimenting with the system. That is about as far as I go with anything other than using the system. Certainly, I've not found any need to perform the sort of tasks that are often being recommended, and even the systems I run 24/7 remain efficient in operation.
    I can say that while my G4 was running off a 5400rpm drive, increasing RAM from 768Mb to 1.5Gb quite dramatically improved performance of both 10.4 and 10.2 but had little benefit in OS9 (all booting from separate drives). The effects were rather less noticeable after swapping out to 7200 drives instead.

  • Putting new memory in the Mac Mini - tips and (especially) pitfalls

    I had some problems in expanding my Mac Mini's memory. If you're about to do the same thing, you might find my experiences useful. So here they are.
    *Opening the case*
    I followed advice to use a plastic putty-knife and bought a one specially, but ran into a couple of problems. First, the plastic knives aren't as sharp as the metal ones, so they don't push into the available gap. I had to sharpen the edge before it would go in. The second problem was that, once in, it wasn't rigid enough to open the case; it just bent.
    At this point I should have left it and gone back to the drawing board, but I was frustrated and flustered and casting about for anything that would do the job, I ended up using the metal blade of a set-square. This worked, but either because it wasn't flexible enough or because I was a bit coarse in my technique, I did some damage to the clips.
    When I had to open the case a second time, I used a small, very thin and flexible cheese-grater and the case popped open like a dream.
    *The four corner screws*
    A magnetic screwdriver would have been a godsend for this, but since I didn't have one, I just had to tip the Mini up when the screw was loose and hope it didn't disappear into the workings. Fortunately none of them did. So not everything went wrong. Three of the screws were easy to put back - they could either be pushed or dropped into the holes, but the fourth couldn't be got in either way. Thinking about it afterwards, I realised I could have turned the mini upside down and put the screw on top of the screwdriver and got it in that way. But what I actually did was bite the end off a toothpick, jam it into the screw head and then push it in the hole. Worked a treat.
    Note. My instructions said not to worry about the spring on the Airport antenna -"It's not going to fly off." Maybe not, but it can come loose and is then a pain to put back. Suddenly the wire holding the antenna doesn't seem long enough. Before you know it the antenna cable has come off completely, leaving you with the choice to undo all the screws again or forget about using Airport.
    *Lifting the chassis*
    Some advice tells you to undo all cables and take the chassis off completely, but the advice I followed suggested just undoing the fan control wire and propping the the chassis on a book with the others still attached. This worked fine. I was nervous about pulling on the wire to release the fan control, so I used a fingernail to get under the rim of the plug itself and popped it off that way.
    *Fitting the RAM*
    This was the easy part, though it didn't snap in as positively as some I've done.
    *Putting back the fan control wire*
    I put the wire back, as I thought, and powered up the Mini with the lid still off. I checked that the memory was properly installed and was delighted that it was. I vaguely noticed that the Mini was making a lot of noise, but thought that might be because the case was off. In my defence, none of the instructions identified the wire I was disconnecting as the fan control wire; they just called it "the little wire in front". Anyway, I put the lid back on, then realised I had a problem and took it off again. I learned (from Boece) that "the little wire in front" was indeed the fan control wire and saw that it was loose. It took me several tries to get it in. It's in an awkward place, is very small and sometimes appears to go in when it really hasn't. But whereas a few times I thought it had gone in, when it did go in I knew it was in. One of those things you only ever do once, but could do so much more easily the second time.
    *Putting the lid back*
    Some advice suggests just pushing the lid back, but you can cause damage that way. The clips can get bent out of shape. The best way is to use your cheese-grater or whatever, to gently ease the lid back on.
    Conclusion
    This was a bad experience; I had visions of ending up with an unusable machine and a void warranty. But in fact it I now have a quiet, working 2GB Mac Mini - and the nightmares have almost stopped. If you're about to try it, take comfort from the fact that you couldn't have as bad an experience as I had. Probably.
    Michael

    Pretty much describes my experience. I used a relatively thin metal putty knife to take the case off. Not to difficult doing one side at a time. I totally agree, a magnetic screw driver would have been very helpful when replacing the bracket. By far the biggest problem I had was the fan control wire. Very short cord in an awkward location. End of story - all back together with 2gb or ram. Probably toook 35-40 minutes (Including 10-15 fooling around with that lousy fan control wire.)

  • Can you use PC-1066 memory in 2011 Mac Mini?

    I have a Mid-2010 Macbook Pro 15" with the standard 4Gb of PC-1066 and I'm looking into buying the 2011 Mac Mini base model.
    Now, if I purchase 8Gb of PC-1066 for my MBP, is the Mini compatible with the PC-1066 memory? I know both the MBP and Mini use the same form factor memory, but the Mini takes PC-10600. With PCs, this sort of backwards compatibility is pretty standard but I'm still pretty new to Macs and I'm not sure how fickle they are.
    Anyone know if you can use PC-1066 in place of PC-10600 in the Mac Mini?

    Works physically, but the 1066MHz RAM is a lower speed than the 1333MHz RAM that 2011 Mini uses.
    Personally I'd leave the MacBook as is and order the correct upgrade for the Mini.
    Apple Mac mini Memory DDR3 / Ram upgrades for 2011 Mac mini unibody models
    Computer memory upgrades for Apple Mac mini (Intel Core i7 2.7Ghz) DDR3 - Mid 2011 Desktop/PC from Crucial.com

  • Problem upgrading memory of a mac mini 2010

    I have a Mac mini 2010 with these memories
    2 x 1GB PC2-5300 667MHz Ram
    http://i.imgur.com/L25KW0q.jpg
    I bought a memoir of Ebay and do not work.
    Insert 2 modules and makes strange beeps on boot, if I put up does nothing starts without beeping and not send video signal and if I put the form below makes the odd beep.
    They are:
    RAM-DDR3-Macbook-pro-mid-02.02.2012-GB-4GB-mt8jtf25664hz-1g6m1
    It is this: http://imgur.com/DFV7s99
    2GB 1RX8 PC3-12800S
    http://es.wikipedia.org/wiki/DDR3_SDRAM
    Turns out I tried i7 laptop with (DDR3, 10600, 1333-MHz) and worked and this is (12800 DDR3-1600) art of a MacBook Pro 2012 ...and does not work ...
    Can anything be done?
    Perhaps better than store or sell ...
    My laptop has Windows 8Gb and may put them at Mac and these 4Gb the laptop i7, but maybe worse.
    Greetings

    A mid 2010 Mini needs:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • How many memory slots on mac mini 2010?

    I have a Mac Mini 2.4 (mid-2010) I bought used with 4GB of RAM. The previous owner upgraded from the standard 2GB. I have the chance to get 2X more 2GB cards that are compatible. I am curious if I can do that. Are there 4 memory card slots? Or would I need to buy two 4GB cards? Thanks!

    http://support.apple.com/kb/SP585
    Regards.

  • Can I use Targ. disk mode to add Tiger to a Mac mini G4 from an Intel iMac?

    Hey all,
    Last year I bought a 2.16 GHZ imac (intel duo core), I recently bought a used Mac mini on ebay for a gift for my mother (does not come with any software). She is dying to get an apple so I thought I would get her one. The mini is a 1.25 GHZ G4 PPC with 1 GB RAM and a 100 GB HDD. The person I am buying it from says that she tried to load Leopard and the install failed (something about firmware updates). I would like to add Tiger to it.
    Here is my predicament...
    I have the Tiger discs that came with my iMac. I have since bought and installed Leopard on my iMac. I was assuming that I could install my unused Tiger discs on the mini but have come to find out that is probably not going to work (discs are machine specific?).
    So what I am wondering if there is a way to load Tiger onto the mini from the iMac using Target Disc Mode? If not, where can one find the unit specific version of 10.4? I just feel really dumb and thought that this would be an easier process. My mom's birthday is coming up soon and I just really want to have this done for her before it.
    Another question, is anyone aware of what firmware updates the seller may have been alluding to?
    I really do appreciate your time and assistance in this matter.
    Thank you

    Specifically this is the only order that will work with Target Disk Mode:
    1. Setup the Mac with a broken or incompatible optical drive in target disc mode.
    http://docs.info.apple.com/article.html?artnum=58583
    2. Boot off Leopard or Tiger on the working optical drive of the non-target mode machine. Connect the two machines via Firewire cable.
    3. Install Leopard or Tiger.
    Since a PowerPC Mac won't boot an Intel Tiger, and the Intel Mac won't boot a PowerPC Tiger, the initial assumption here won't work with Target mode.
    Message was edited by: a brody

  • How to add a computer to Mac Mini server network?

    Hello,
    Can anyone tell me how to add a Mac Air to the computers my Mac Mini server recognizes? Currently, I cannot share files between computers.
    Thanks for any help!

    Hmmm, not sure which end the problem is on, if you don't get an answer here you might post over here...
    https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_lio n_server

  • How to add Dell printer to Mac Mini?

    How do I add a dell printer to Mac Mini?

    Did you try to Secure Empty the trash?

  • Is it possible to add RAMs to my MAC book Air

    As above

    nope, ram is secured to the logic board of macbook airs, there is no way to add ram.

  • Can you add memory to a mac book

    can memory be added to a mac book

    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

Maybe you are looking for