Is it possible to add new character set encodings?

Hello,
is it possible to add new character set encodings in Mac OS?
Practically, i need to add "Russian (DOS)" encoding to Tiger, but is it at all possible even in newer versions of Mac OS?
Where to find the missing encodings and how to install them?
Google search did not return much.
Thanks.

Well, it was a general question about possibility of adding new encodings in Mac OS, but i posted a more specific question about Tiger here:
http://discussions.apple.com/thread.jspa?threadID=2692557&tstart=0
On Tiger i do not have Russian (DOS) in TextEdit, only Cyrillic (DOS).
The same about TextWrangler on Tiger.
Strangely, i have Russian (DOS) in TeXShop on Tiger.

Similar Messages

  • Add new Character Set (Arabic AR8MSWIN1256) to existing 11gR1 (Windows)

    Hi all
    I have an installed 11gR1 database on Windows 2008 platform with default character set of AMERICAN_AMERICA.WE8MSWIN1252.
    How do I go about adding another character set (ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256) to the database so that it support storage/retrieval of arabic characters as well as English? Is this possible?
    Or do I have to recreate the database with both character sets selected at creation time?
    Cheers.

    You cannot add a character set to an Oracle database. Your choices are (in increasing order of recommendation)
    1) Use the NVARCHAR2 data type to store Arabic data. NVARCHAR2 character set is usually AL16UTF16, so you can store any language there. Cons: special handling must be programmed/configured in applications to use NVARCHAR2; some components, like Oracle Text, do not support NVARCHAR2 data type.
    2) Migrate the character set of your database to AR8MSWIN1256. If your database is freshly created and empty, just drop it and create a new one. If the database is not empty but you have only pure ASCII data in the whole database, e.g. no special Windows characters, you can use csscan+csalter.plb to migrate. Search this forum and Oracle Database Globalization Support Guide for instructions.
    3) Migrate the character set of your database to AL32UTF8. The migration conditions are as in 2) above. AL32UTF8 is Unicode and you can store Arabic, English, French, and whatever your want. One disadvantage: Unicode is obviously a multibyte character set and Arabic requires more space in Unicode compared to AR8MSWIN1256, which is single-byte. But in AR8MSWIN1256 you cannot properly store Persian and some other languages written with Arabic script. You cannot store French, German, Russian, etc. either.
    -- Sergiusz

  • How to add a new character set encoding?

    Hello,
    can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
    I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
    On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
    If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
    So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
    Thanks.

    I think possibly that's in the Get Info window of Finder?
    I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them).

  • Is it possible to add new columns with format "Text" once a table is linked to a form

    Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
    Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
    Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

    Hi Knochenhort,
    I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
    When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
    I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
    It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
    To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
    Hope that helps!

  • If is possible to add new local var to sequence from the outside?

    If is possible to add new local var to sequence from the outside?
    I mean insert a new local variable to Sequence.Locals list or via expression, or by LabView VI (Sequence Context). or any another way.
    Thanks.

    Hi,
    The simplest way would be to use the API TS method PropertyObject.SetValBoolean, PropertyObject.SetValNumber or PropertyObject.Set ValString. With the SequenceContext you create a PropertyObject using the method SequenceContext.AsPropertyObject, which you use as the reference for the the SetVal method.
    For the SetVal method, pass the full lookup string of your variable eg "Locals.MyString" and set the option parameter to 0x01 (insert if missing).
    If you are calling this from LabVIEW, then use the SetVal property VI.
    This will insert a varable into the Locals that is "in scope" of the step that is performing the task. 
    In the TestStand Help - "Using the API in Different Programming Languages" and in the TestStand User manuals there is more information to help you.
    This will only make a runtime version of your Local. ie when your sequencefile stop executing your Local will not exist in the Static version of the Sequence File.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • ORA-12712: new character set must be a superset of old character ...-

    Dear all ,
    i have a problem with oracle database,
    server configuration oracle 10g, solaris 9, sparc processor 64 bit,
    i altered database character set to UTF8, whe i return database to old seeting ISO 8859-6
    i got this error ORA-12712: new character set must be a superset of old character set.
    anyone can help me and let me know how can i solve this error?
    thanks
    Gasir

    You should recreate a new database and use export/import to transfer data from the existing UTF8 database to the new ISO 8859-6 database according to the ]Globalization Guide.

  • Is it possible to add new screen fields to the transaction /dsd/sl_cockpit

    HI experts,
          Would like to know if it is possible to add new screen fields to the cloned version of /dsd/sl_cockpit.
          I cloned the original transaction /dsd/sl_cockpit into a diff. name, now I want to know how I can include/ add those new fields to this transaction.  It looks like the screen is dynamically built using Standard ABAP classes. Need help.
    Thanks in advance

    it is not possible to add new fields via badi on /dsd/sl_cockpit.

  • Is it possible to add new language in General Setting?

    Hi all,
    I would like to add new language ("Cambodia[Khmer]") in General Setting in SAP and when i select that language, the system auto translate to khmer.
    Is it possible to do that? if yes, can u tell me how to do?
    Thanks
    TONY

    Hi Soeun,
    You need to have S-User Id and password to open the link, Edy suggested. Still, I am sharing the Note with you:
    Symptom
    SAP Business One is currently available in 27 languages. While SAP may continue to increase the number of supported languages over time, it is not feasible to satisfy all possible demands.
    Solution
    The SAP Business One strategy is to empower its partners to take responsibility for the translation of the user interface (UI) into other languages, as needed.
    To support this process we have added a new tool to the Installation and Upgrade package.
    The Custom Language Tool (CLT) file 'CLT.zip' is located in the folder 'Packages' in the Installation or Upgrade packages.
    It enables partners to:
    Define an additional UI language
    Generate a UI string source file to be translated into the new target language
    Upload the UI string target file in the new language to SAP Business One
    Make the new language available to SAP Business One users
    For more information, see the 'User Guide - Custom Language Tool.pdf' contained in the package.
    Thanks & Regards
    Ankit Chauhan

  • Is it possible to add new line to existing Blanket Agreement through interface?

    Hi All,
    I need to add a new line to exisitng list of blanket agreements.
    I populated po_headers_interface and po_lines_interface and ran 'Import Price Catalogs' program.
    But this is only trying to update existing line instead of creating a new one.
    Please clarify whether it is possible to add just a line using the above process?
    tried multiple scenarios:
    action field in both tables - ORIGINAL - error, doc already exists.
    action field in both tables - UPDATE - updates existing line.
    action field - (UPDATE in hdr and ORIGINAL in line) - updates existing line.
    Thanks in advance.
    Girish

    Hi All,
    It's working now. populated action field as 'ADD' in po_lines_interface and it created a new line.

  • Is it possible to add new tags after i accidentally deleted some?

    I was renaming all the new coloured tags on my MacBook and i accidentally deleted some of the tags. I now dont have enough for all my different subjects but can see no option to add new tags, is it possible?

    What I've done to create new tags from scratch is to create a throwaway text file called "tag test" (or something like that) and temporarily place it on my Desktop for easy access. Then, in Finder, I select the "tag test" file and click the "Edit Tags" icon in the toolbar at the top of the Finder window. (The "Edit Tags" icon looks like a horizontal switch.) From there, you can create a brand-new tag (say, "Tag 1"). After you press Enter, "Tag 1" will appear in the Tags list in the Sidebar. Two-finger click "Tag 1" in the Sidebar, and from the contextual menu, select the color you would like to apply. (You may also rename "Tag 1" to something else if you choose.)
    Repeat this process as many times as necessary in order to recreate all the tags you'd like -- and then delete the "tag test" file.
    Hope that helps.

  • Is it possible to add new mappings for SRM?

    I am looking to replicate some of the "Request for Quotation" creation/management functionality from SRM in a custom application (for business/technical/ease-of-use reasons) and send the created RFQs over to SAP SRM. Can I use XI to send RFQs into SRM (I know I can retrieve them using XI for custom supplier apps, but can I send them in as well)?
    While reviewing the EBP mappings in Integration Builder, I see there is a mapping for RequestForQuotation_Create_Out, but not for RequestForQuotation_Create_In. Is it possible to add this mapping? Or in other words - <b>is it possible to create new mappings for SRM in XI that are in addition to the standard mappings that are shipped with SRM/XI? </b>
    Thanks for your help in advance.

    Hi Osvaldo,
      <i>I see there is a mapping for RequestForQuotation_Create_Out</i> --> I dont think you can find a mapping for the same. RequestForQuotation_Create_Out should be the name of the interface(outbound). What it means is you can have your own custom defined inbound interface and perform the mapping on your own in a new SWC. Pls update me if you can see a mapping for the same. Also you can have yor own interfaces and mapping in your SWC apart from the standard as suggested by Bhavesh and Abhy.
    Take care while desingning the interface for SRM part coz SRM has the ability to output in XML format. Check this functionality first and start designing your interface.
      Update us if you have more querries.
    Regards,
    Jai Shankar.

  • Is it possible to add new delivery schedule with bapi_change_po?

    Hi all,
    We're able to update PO existing line item and delivery schedule date with BAPI_CHANGE_PO. However we can't find any way to add new delivery date (under delivery schedule tab, in PO) for multiple delivery schedule scenario.
    please advise is it to do so with BAPI_CHANGE_PO or we should try other approach to do it. Thanks.

    Use the BAPI "BAPI_PO_CHANGE".  New delivery schedule information can be filled in the structures POSCHEDULE & POSCHEDULEX.
    poschedule-po_item = <item_number>
    poschedule-sched_line = <new schedule Line>.
    poschedule-delivery_date = <delivery_date>.
    poschedule-quantity = <schedule quantity>.
    append poschedule.
    poschedulex-po_item = <item_number>
    poschedulex-sched_line = <new schedule Line>.
    poschedulex-po_itemx = 'X'.
    poschedulex-sched_linex = 'X'.
    poschedule-delivery_date = 'X'.
    poschedule-quantity = 'X'.
    append poschedulex.
    Regards
    Vinod
    Edited by: Vinod Kumar on Apr 21, 2010 11:35 AM

  • Is it possible to add new characteristic to CCM catalog SRM_EXTRACTED_CTLG?

    Hi Experts,
    Any idea if I can transfer new extra data from the SRM product master into CCM? (via program BBP_CCM_TRANSFER_CATALOG)
    So I want to add a new characteristic (e.g. ZVALUEPRICE) to the catalog SRM_EXTRACTED_CTLG and fill it with the valuation price.
    According to BAdI BBP_CCM_CHAR_MAINT it should be possible:
    "When you transfer SRM product data to SAP Catalog Content Management (SAP CCM), this BAdI enables you to also transfer additional item characteristics contained in the product master data in SAP Enterprise Buyer. These characteristics are then available in the SRM product catalog in SAP CCM."
    But I'm getting errors like: "Value assigned to ZVALPRICE is not valid-locale NL/ is not possible".
    Any idea how I should set this up? Or if I'm doing anything wrong?
    I know the valuation price is also filled in /CCM/PRICE, but I want to map the content into a different field. And change the mapping of original created field is not possible.
    Thanks in advance.
    Kind regards,
    Marius Hartman
    Edited by: Marius Hartman on Mar 4, 2009 1:39 PM

    Hi All,
    Turns out that when we don't add a language code to the code, the problem is resolved. So currently I'm able to add the information to a new field in CCM catalog SRM_EXTRACTED_CTLG
    Marius Hartman

  • Is it possible to add new method in existing photoshop object model?

    someone suggested to use automation scripting plugin that can record & replay event through action manager.I am new to photoshop can anyone tell how & where to add functionality in sample plugin(like filter/dissolve) given in photoshop sdk.Pls reply

    Add a plugin that does what you need, add scripting terminology to that plugin, then call that plugin from JavaScript (or other scripting language).

  • Add new view set to navigational bar

    i have a new viewset with views( this is working fine i tested it alone
    how can i add this to a link in navigational bar?

    Hi,
    You can follow the below steps,
    1. In the runtime repository add your window to the component Interface, add inbound and outbound plugs as well
    2. Go to SPRO->CRM>UI Framework->Technical Role Def->Define Work Area Component Repository, create new entry and add your component.
    3. Go to Nav bar profile and create logical link, create work center link group and add your logical link.
    4. Use some existing work center and assign the work center link group created to this work center
    5. Go to Define Business Role and choose your business role and enable that work center link.
    Regards,
    Shobhit

Maybe you are looking for