Is it possible to adjust the extend connect timeout?

When we have a cluster member down and the extend client tries to connect to it, there appears to be a minimum timeout of ~1 second. Is there any way of reducing this so that it is negligible?
I have tried:
<remote-cache-scheme>
     <scheme-name>remote-scheme</scheme-name>
     <service-name>ExtendTcpCacheService</service-name>
     <initiator-config>
          <tcp-initiator>
               <remote-addresses>
                    <socket-address><address>localhost</address><port>10000</port></socket-address>
               </remote-addresses>
               <connect-timeout>1MS</connect-timeout>
          </tcp-initiator>
          <outgoing-message-handler>
               <request-timeout>5s</request-timeout>
          </outgoing-message-handler>
     </initiator-config>
</remote-cache-scheme>However, it still takes ~1 second to realise there is no socket there. Is this a machine level setting perhaps?
(This is in a .Net extend client running under IIS)

Hi all - I found KRD Harris discussion regarding this question - no need to answer.
Thanks.

Similar Messages

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless.

Is it possible to adjust the size of an inputText to the column size ..?

Is it possible to adjust the size of an inputText that it correspond to the column size in a af:table.
Thanks

I don't need 30% ... i just need that me tree as a mininal width
Here is my page :
<af:panelBorder>
<f:facet name="top">
<af:panelHeader text="#{res['classification.repository.entryList.panelHeader.title']}"/>
</f:facet>
<f:facet name="left">
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.list.panelHeader.title']}">
<af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
var="node">
<f:facet name="nodeStamp">
<h:panelGroup>
<af:commandLink text="#{node.classificationEntryCategoryCode} #{node.classificationEntryCode}"
shortDesc="#{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart1']} #{node.classificationEntryStatus} #{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart2']}#{node.classificationEntryCodeFullPath}">
<f:param name="selectedIdentification"
value="#{node.classificationEntryIdentification}"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
</af:panelHeader>
</af:panelGroup>
</f:facet>
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.node.panelHeader.title']}"
binding="#{backingRepositoryEntryList.entryNodePanelHeader}">
<af:showDetailHeader text="#{res['classification.repository.entryList.base.panelHeader.title']}">
<af:panelForm>
<af:inputText value="#{bindings.classificationEntryCategoryCode.inputValue}"
label="#{bindings.classificationEntryCategoryCode.label}"
required="#{bindings.classificationEntryCategoryCode.mandatory}"
columns="#{bindings.classificationEntryCategoryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCategoryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCode.inputValue}"
label="#{bindings.classificationEntryCode.label}"
required="#{bindings.classificationEntryCode.mandatory}"
columns="#{bindings.classificationEntryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCodeFullPath.inputValue}"
label="#{bindings.classificationEntryCodeFullPath.label}"
required="#{bindings.classificationEntryCodeFullPath.mandatory}"
columns="#{bindings.classificationEntryCodeFullPath.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCodeFullPath.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryIdentification.inputValue}"
label="#{bindings.classificationEntryIdentification.label}"
required="#{bindings.classificationEntryIdentification.mandatory}"
columns="#{bindings.classificationEntryIdentification.displayWidth}">
<af:validator binding="#{bindings.classificationEntryIdentification.validator}"/>
</af:inputText>
</af:panelForm>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.mainTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.language}"
width="20%">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.content}">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.complementaryTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.content}"
width="20%">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.language}">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
</af:panelHeader>
</af:panelGroup>
</af:panelBorder>

Is it possible to adjust the size of the columnes when send alv by mail ?

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

How is it possible to adjust the background images and the text in Mail?

How is it possible to adjust the background images and the text in Mail?

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

If could be possible to share the 3G connectivity , using a "IPAD 1" original IOS 4.3.1

Hi all, I would like to undestand, using a "IPAD 1" original IOS 4.3.2
without jbreak or other app, if could be possible to share the 3G connectivity with another mobile phone or PC ?
King Regards
giordenzo

No, it's not possible.

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Is it possible to adjust the proccessor speed?

From core duo temp , I find that my macbook is usually running at 1.5ghz. I am wondering if anybody knows if it is possible to manually adjust the speed maybe down to 1.33 , to cool the macbook down?
Thanks for any responses.

As far as I've seen there is no supported way of throttling down your processors, and surely no way to "overclock" (speed up) your processor(s).
I have seen some sites listing ways it is actually possible to overclock some Macs, but I'm not sure if it is a possibility with the Intel macs.
If there is a way to throttle the speed of the Core Duo then it's gonna be through some third party software, google is your friend. :P

Is it possible to adjust the photo angle and size in Snapshots theme

Hi
I'm new to aperture and am having a few frustrated-hair-pulling issues with the Snapshots theme. I was using iPhoto to create a Photobook of my son's first year and found it to be too limited for what I want to create. I came across Aperture and was wow'ed by the description saying I could rotate and resize photos, add text boxes etc. This was just what I was after so I downloaded the free trial to test it. I like the snapshots theme the best for the idea of it looking more "homemade" but seem to be unable to adjust the photo angle and size from the given templates. Also I find that the border in adding new photos (which I can adjust the size and rotation of) is without the custom shadow effect that the template ones have. Duplicating the template photo only gives one with the shadow effect but also of the same size with the same rotation that I can't do anything with! Rrrrghhhh
I thought this would be a great way to customize the album I'm making for my little boy, and that it wouldn't be too hard! My mac skills are considerable, but I'm by no means an expert! Is this program too much for a non-pro-creative-housewife with a wish that may be solveable in iPhoto afterall?
Or am I just missing something? Is there a way to do this or shall I just give up and choose another theme?
Any recommendations are welcome! Please!!! My scalp is now officially sore!

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Hi,
I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
Is there any way to do this?
I'm new to Flash so, thanks in advance for your patience with me!
SabelV

Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct. Wish I knew how to rate your answer even higher. Thanks again!

Is it possible to adjust the strength of the bluetooth radio on the iPhone?

Hi,
I am attempting to use the iPhone bluetooth to control a third party device that also has bluetooth. Unfortunately, when I send an instruction from the iPhone to the device, the device and the iPhone become unpaired and the instruction is lost. I have heard that increasing the strength of the bluetooth signal could fix this problem. How would I go about adjusting the power setting of the bluetooth radio? (battery life is not a concern here). Or is there another way to solve this problem?
Thanks a lot in advance!

Hi,
I am attempting to use the iPhone bluetooth to control a third party device that also has bluetooth. Unfortunately, when I send an instruction from the iPhone to the device, the device and the iPhone become unpaired and the instruction is lost. I have heard that increasing the strength of the bluetooth signal could fix this problem. How would I go about adjusting the power setting of the bluetooth radio? (battery life is not a concern here). Or is there another way to solve this problem?
Thanks a lot in advance!

Is it possible to adjust the download speed?

I was just wondering if there was a way to adjust the download speed of iTunes. Reason being, I want to be able to download music or whatever but just at a lower speed (like in the background) so I can still do whatever else I want and not have to worry about lag. That way I don't have to worry about pausing and resuming all the time.

I know this can be done if you are using another computer in path to do some traffic shaping. Many ISPs do this for P2P program traffic.
Yuor computer should be able to share available bandwidth between applications. Unless on of your apps is sensitive to other traffic this should be automatic.

Multilangual. Is it possible to adjust the language of fields due to the standardlanguage/buttons?

Is it possible to somehow make a script that changes all texts (in a PDF) of a form to other languages? Perhaps through the standard language used on the computer or a multi select button??
I thought to put everything into subforms and hide it, appearing if another button is clicked and hiding the original subform. Might look ugly on programmers sight, but as long as it'd work, I'd "live" with it ;)
But is there any possibility to make the default set by the users standard language?

I am not sure that you can get the language setting of the machine in your script or not. If not you may have to have th euser indicate which language they want. Once that is done then you can change all of the strings programmatically from a technical perspective anyways.
Depending on the complexity of the form, you may find a point where it will affect the performance of the form. I have seen cases where changing the language can take 5-10 seconds to complete. Also you run into issues with space where as I change a caption a word in English takes 2 mm but the same word in French takes 5 mm. So you have to design the form for the worst case. This is no so bad if the form is simple but the more complex the form the more difficult this becomes.
In many cases people will create an xml file for all language strings and merge the xml data onto the form. There are advanced binding properties that can bind the XML to the caption of a field and thus no coding is required. This is useful if you have LiveCycle server products because you can render these forms (with a language file) on demand. If you are trying to do this with a stand alone PDF (no rendering on the server) then you have no choice but to do it via script.
OR
Create a unique file per language.

Why do i keep getting the "internet connection timeout" error message?

i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

Avoiding the idle connection timeout?

Our DBAs have implemented an idle connection timeout.
Is there an option in SQL-Developer to keep the connection alive by having it periodically send "dummy" commands to keep the connection alive?

Hi,
Even though there is no listing for it on the Third Party Extensions Exchange on the SQL Developer Community page here,
http://www.oracle.com/technetwork/developer-tools/sql-developer/community/index.html
a "Keep-Alive" extension exists and you may wish to try it. Here is the post for it on this forum:
SQL Developer Keep-Alive Extension Created!
If you don't wish to install an extension, an alternative is here:
How to reconnect without using the "keep alive" plug-in?
Regards,
Gary
SQL Developer Team

Is it possible to adjust the extend connect timeout?

Similar Messages

Maybe you are looking for