Is it possible to adjust the sensitivity of multi touch zoom in Safari 4?

Hey, everyone.
I got my Macbook a few weeks ago, and it's my first exposure to OSX. I really enjoy it, and the mouse gestures have really been an incredible user experience (especially the two finger scroll- how absurdly convenient). I also occasionally used the zoom-in|out feature with multi touch, but something's changed. Before, a pinch would bring me one up or down one 'level' in Safari. Now, however (and I don't think I've changed much... upgraded to Safari 4, which come to think of it might have something to do with it) it skips over pretty much 6-7 'levels' of zoom from a pinch. It still works fine in Preview, it's a Safari only problem.
Is this a known problem with Safari 4?

I have noticed that problem with this Safari 4 beta, also, hypersensitive touch pad zooming. So it must be a software issue that is out of our hands. Hope the development team gets this fixed soon.

Similar Messages

Satellite P300 - how do I adjust the sensitivity of the touch pad?

I have read all of the forums without luck. Is it possible to adjust the sensitivity of the touch pad? I have gone into the control panel and clicked through the mouse settings but there is no 'Advanced' or 'Synaptics' tabs allowing this to be adjusted. At the moment, I am using the FN + F9 to disable the touch pad altogether, however I am hoping that this is a short term solution. Thanks for any replies.

If Synaptics driver is preinstalled on your notebook you can find advanced settings HERE .
When you open the properties the last option is Sensitivity .

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless.

Is there a way to adjust the sensitivity of the LG Extravert phone keypad?

having trouble with the keypad entering several of the same letters at the same time. Is there a way to adjust the sensitivity?

Hi Whitehouse,
When the physical keys are entering a letter twice, it will definitely be something with the hardware. Can you verify that the keys appearing twice aren't getting stuck when pressed? You should be able to feel the key returning when the pressure of the finger comes off. If they're getting stuck, please check the charging port and headset jack for corrosion and any other damage to the phone. If the phone is under warranty it may require a replacement. Please keep us posted.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Is it possible to adjust the size of an inputText to the column size ..?

Is it possible to adjust the size of an inputText that it correspond to the column size in a af:table.
Thanks

I don't need 30% ... i just need that me tree as a mininal width
Here is my page :
<af:panelBorder>
<f:facet name="top">
<af:panelHeader text="#{res['classification.repository.entryList.panelHeader.title']}"/>
</f:facet>
<f:facet name="left">
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.list.panelHeader.title']}">
<af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
var="node">
<f:facet name="nodeStamp">
<h:panelGroup>
<af:commandLink text="#{node.classificationEntryCategoryCode} #{node.classificationEntryCode}"
shortDesc="#{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart1']} #{node.classificationEntryStatus} #{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart2']}#{node.classificationEntryCodeFullPath}">
<f:param name="selectedIdentification"
value="#{node.classificationEntryIdentification}"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
</af:panelHeader>
</af:panelGroup>
</f:facet>
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.node.panelHeader.title']}"
binding="#{backingRepositoryEntryList.entryNodePanelHeader}">
<af:showDetailHeader text="#{res['classification.repository.entryList.base.panelHeader.title']}">
<af:panelForm>
<af:inputText value="#{bindings.classificationEntryCategoryCode.inputValue}"
label="#{bindings.classificationEntryCategoryCode.label}"
required="#{bindings.classificationEntryCategoryCode.mandatory}"
columns="#{bindings.classificationEntryCategoryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCategoryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCode.inputValue}"
label="#{bindings.classificationEntryCode.label}"
required="#{bindings.classificationEntryCode.mandatory}"
columns="#{bindings.classificationEntryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCodeFullPath.inputValue}"
label="#{bindings.classificationEntryCodeFullPath.label}"
required="#{bindings.classificationEntryCodeFullPath.mandatory}"
columns="#{bindings.classificationEntryCodeFullPath.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCodeFullPath.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryIdentification.inputValue}"
label="#{bindings.classificationEntryIdentification.label}"
required="#{bindings.classificationEntryIdentification.mandatory}"
columns="#{bindings.classificationEntryIdentification.displayWidth}">
<af:validator binding="#{bindings.classificationEntryIdentification.validator}"/>
</af:inputText>
</af:panelForm>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.mainTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.language}"
width="20%">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.content}">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.complementaryTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.content}"
width="20%">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.language}">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
</af:panelHeader>
</af:panelGroup>
</af:panelBorder>

Is it possible to adjust the size of the columnes when send alv by mail ?

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

How is it possible to adjust the background images and the text in Mail?

How is it possible to adjust the background images and the text in Mail?

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

Can you adjust the sensitivity (Skipping through Transients)?

Protools lets you skip through your waveforms while editing (quick). Logic goes to every little waveform (Transient) to detailed. You know when you go to BeatMapping when you adjust the sensitivity to lets say (50) it goes to the Highest waveform and marks it.
What I want to do is in the (Arrange Window) >I want to skip through and cut up my waveforms by the Highest Peaks of the wave! (Does that make sense)

I have 10 drum tracks regions marquee selected and I have the kick track selected and when I shift right arrow all the tracks are analyzed but I want ONLY the kick's transients to be analyzed since there is no noise between the hits. The noise and non gated low level signals are causing the transient detector to make a stop every little step I do not want this, nor do you. How do we use this feature and still make the cuts across all the tracks based on the kick's transients ?

Is it possible to find the time a website was visited in safari history?

Is it possible to find the time a website was visited in safari history?

See:
http://www.justanswer.com/computer-programming/7c5qf-iphone-settings-safari-adva nced-website-data.html

Is it possible to mute the camera of ipod touch (IOS6)?

Is it possible to mute the camera of ipod touch (IOS6)?

Do you mean the shutter sound? If so then see:
https://discussions.apple.com/message/12357568#12357568

Is it possible to adjust the proccessor speed?

From core duo temp , I find that my macbook is usually running at 1.5ghz. I am wondering if anybody knows if it is possible to manually adjust the speed maybe down to 1.33 , to cool the macbook down?
Thanks for any responses.

As far as I've seen there is no supported way of throttling down your processors, and surely no way to "overclock" (speed up) your processor(s).
I have seen some sites listing ways it is actually possible to overclock some Macs, but I'm not sure if it is a possibility with the Intel macs.
If there is a way to throttle the speed of the Core Duo then it's gonna be through some third party software, google is your friend. :P

Is it possible to adjust the download speed?

I was just wondering if there was a way to adjust the download speed of iTunes. Reason being, I want to be able to download music or whatever but just at a lower speed (like in the background) so I can still do whatever else I want and not have to worry about lag. That way I don't have to worry about pausing and resuming all the time.

I know this can be done if you are using another computer in path to do some traffic shaping. Many ISPs do this for P2P program traffic.
Yuor computer should be able to share available bandwidth between applications. Unless on of your apps is sensitive to other traffic this should be automatic.

Is it possible to adjust the photo angle and size in Snapshots theme

Hi
I'm new to aperture and am having a few frustrated-hair-pulling issues with the Snapshots theme. I was using iPhoto to create a Photobook of my son's first year and found it to be too limited for what I want to create. I came across Aperture and was wow'ed by the description saying I could rotate and resize photos, add text boxes etc. This was just what I was after so I downloaded the free trial to test it. I like the snapshots theme the best for the idea of it looking more "homemade" but seem to be unable to adjust the photo angle and size from the given templates. Also I find that the border in adding new photos (which I can adjust the size and rotation of) is without the custom shadow effect that the template ones have. Duplicating the template photo only gives one with the shadow effect but also of the same size with the same rotation that I can't do anything with! Rrrrghhhh
I thought this would be a great way to customize the album I'm making for my little boy, and that it wouldn't be too hard! My mac skills are considerable, but I'm by no means an expert! Is this program too much for a non-pro-creative-housewife with a wish that may be solveable in iPhoto afterall?
Or am I just missing something? Is there a way to do this or shall I just give up and choose another theme?
Any recommendations are welcome! Please!!! My scalp is now officially sore!

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Hi,
I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
Is there any way to do this?
I'm new to Flash so, thanks in advance for your patience with me!
SabelV

Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct. Wish I knew how to rate your answer even higher. Thanks again!

Can you adjust the sensitivity for motion sensor for MBP 13"

I recently notice the clicking noise when I move the laptop, usually sits on my lap. I have been reading this and people talks about disabling it via the 'sudo pmset' command to set 'sms' to 0.
I want to know if there is a parameter somewhere just to change the sensitivity instad of turning this off completely.

I can't see any obvious way to do it using the pmset command, J. , but third party applications certainly do change it for various other purposes, mostly entertaining (see skipchecker for example. You would think, accordingly, that there must be a means of doing so for the HD head parking routines.
Amit Singh has an interesting piece on its use .
I'll let you know if I can find anything else that might help.
Cheers
Rod

Is it possible to adjust the sensitivity of multi touch zoom in Safari 4?

Similar Messages

Maybe you are looking for