Is it possible to adjust the strength of the bluetooth radio on the iPhone?

Hi,
I am attempting to use the iPhone bluetooth to control a third party device that also has bluetooth. Unfortunately, when I send an instruction from the iPhone to the device, the device and the iPhone become unpaired and the instruction is lost. I have heard that increasing the strength of the bluetooth signal could fix this problem. How would I go about adjusting the power setting of the bluetooth radio? (battery life is not a concern here). Or is there another way to solve this problem?
Thanks a lot in advance!

Similar Messages

HT1218 What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?

What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

Can't see the "press to listen to radio in the background" button on my abc radio app

Can't see the "press to listen to radio in the background" button on my abc radio app. It was there before but now it is gone. I must have changed some setting to remove it, but I don't know what I did. Help please. I have uninstalled then reinstalled this app, but the same problem persists.
Thank You

This seems like a problem from the Apple servers, which only they can fix. Try again in a few hours and see if you can update then.

Can you create a keyboard short cut for the dictation mic with bluetooth keyboards? The multi-button requirement to open the onscreen is annoying and unintuitive.

(Using an "iPad 3", i dont care what apple calls it) There should be a built in one button access to this from EVERY keyboard since this function is used to replace typing. An inherent Apple shortcut like copy and paste. I set my iPad up on a framed photo holder and use it like a moniter screen when I write, my Bluetooth keyboard is separated from it and makes writing comments and long articles less efficient because it requires extra steps with every dictation, while taking up screen space to have the on screen open. There needs to be a way to access dictation without the onscreen keyboard open, via any standard keyboard.

I was "reasonably frustrated" for having more than one answer offered for a question that not only didn't I ask, but made it clear I was aware of the information it appears they cut and paste at me.
I see it as: the title of my post should inform any person with an elementery handeling of the english language that I not only have this type of keyboard but am well aware it has a button for the ONSCREEN keyboard. That makes it look like they were just "approval hunting" #1. 2nd Grampa Joe's generic sounding response as a zero level newbie already who found "this" post where the first line is about keyboard shortcuts......WHEN there are better posts with more views and commets for exactly that. Approval hunting #2. I'd say based on both, my suspicion is darn reasonably justified sir.
"couldn't find the answer he wanted" no sir, I didn't get an answer at all, they answered OTHER questions. Questions I didn't ask, even after having explained myself more clearly. If anyone is a Jerk, it's you for jumping to eronous conclusions and attacking me for them on personal level. I made a justified claim based on the BLACK AND WHITE TEXT, that it still appears to me is well supported, you just flung mud.........who's the jerk?
Finally, your first post answered my question directly. Thank you. However under General/Keyboard, at the bottom you can make keyboard shortcuts. They may not function how I'm asking, but you can make them.

What is the verdict? (E2 bluetooth)

Is the Tungsten E2 capable of bluetooth syncing? I've read both types of arguments. (Some say that it only capable with a bluetooth 'card' that Palm used to sell. Some say that bluetooth is available as is. (After all, it does have a 'Bluetooth' app on the unit itself, even after hard reset.
So to clear up any confusion, whom is right?
This question was solved.
View Solution.

Hello whatsizbucket, Welcome to the HP Support Community!
The E2 has a Bluetooth radio. The T|E did not. See this link:
http://kb.hpwebos.com/wps/portal/kb/common/article/38753_en.html
What are you interested syncing to?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Adjusting two handles of an anchor point at the same time?

Hi,
Is it possible to adjust two handles of an anchor point at the same time?
I want to edit the top shape of this egg shape so that it would be symmetrical on both sides when I do adjust it.
What is the easiest way to accomplish this?
Thanks!

When I move the right handle, I need the left handle to move the opposite way and it doesn't. I don't get what you mean by saying that it "should behave just like you want them already."

What happened to Radio in the source list in the latest iTunes

Where is Radio in the source list in the latest version of iTunes?

Why? It's been stated on many an occasion that the Z10 does not support radio, only the other devices.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless.

Is it possible to adjust the size of an inputText to the column size ..?

Is it possible to adjust the size of an inputText that it correspond to the column size in a af:table.
Thanks

I don't need 30% ... i just need that me tree as a mininal width
Here is my page :
<af:panelBorder>
<f:facet name="top">
<af:panelHeader text="#{res['classification.repository.entryList.panelHeader.title']}"/>
</f:facet>
<f:facet name="left">
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.list.panelHeader.title']}">
<af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
var="node">
<f:facet name="nodeStamp">
<h:panelGroup>
<af:commandLink text="#{node.classificationEntryCategoryCode} #{node.classificationEntryCode}"
shortDesc="#{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart1']} #{node.classificationEntryStatus} #{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart2']}#{node.classificationEntryCodeFullPath}">
<f:param name="selectedIdentification"
value="#{node.classificationEntryIdentification}"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
</af:panelHeader>
</af:panelGroup>
</f:facet>
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.node.panelHeader.title']}"
binding="#{backingRepositoryEntryList.entryNodePanelHeader}">
<af:showDetailHeader text="#{res['classification.repository.entryList.base.panelHeader.title']}">
<af:panelForm>
<af:inputText value="#{bindings.classificationEntryCategoryCode.inputValue}"
label="#{bindings.classificationEntryCategoryCode.label}"
required="#{bindings.classificationEntryCategoryCode.mandatory}"
columns="#{bindings.classificationEntryCategoryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCategoryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCode.inputValue}"
label="#{bindings.classificationEntryCode.label}"
required="#{bindings.classificationEntryCode.mandatory}"
columns="#{bindings.classificationEntryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCodeFullPath.inputValue}"
label="#{bindings.classificationEntryCodeFullPath.label}"
required="#{bindings.classificationEntryCodeFullPath.mandatory}"
columns="#{bindings.classificationEntryCodeFullPath.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCodeFullPath.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryIdentification.inputValue}"
label="#{bindings.classificationEntryIdentification.label}"
required="#{bindings.classificationEntryIdentification.mandatory}"
columns="#{bindings.classificationEntryIdentification.displayWidth}">
<af:validator binding="#{bindings.classificationEntryIdentification.validator}"/>
</af:inputText>
</af:panelForm>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.mainTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.language}"
width="20%">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.content}">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.complementaryTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.content}"
width="20%">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.language}">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
</af:panelHeader>
</af:panelGroup>
</af:panelBorder>

Is it possible to adjust the size of the columnes when send alv by mail ?

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

How is it possible to adjust the background images and the text in Mail?

How is it possible to adjust the background images and the text in Mail?

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

Is it possible to adjust the photo angle and size in Snapshots theme

Hi
I'm new to aperture and am having a few frustrated-hair-pulling issues with the Snapshots theme. I was using iPhoto to create a Photobook of my son's first year and found it to be too limited for what I want to create. I came across Aperture and was wow'ed by the description saying I could rotate and resize photos, add text boxes etc. This was just what I was after so I downloaded the free trial to test it. I like the snapshots theme the best for the idea of it looking more "homemade" but seem to be unable to adjust the photo angle and size from the given templates. Also I find that the border in adding new photos (which I can adjust the size and rotation of) is without the custom shadow effect that the template ones have. Duplicating the template photo only gives one with the shadow effect but also of the same size with the same rotation that I can't do anything with! Rrrrghhhh
I thought this would be a great way to customize the album I'm making for my little boy, and that it wouldn't be too hard! My mac skills are considerable, but I'm by no means an expert! Is this program too much for a non-pro-creative-housewife with a wish that may be solveable in iPhoto afterall?
Or am I just missing something? Is there a way to do this or shall I just give up and choose another theme?
Any recommendations are welcome! Please!!! My scalp is now officially sore!

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Hi,
I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
Is there any way to do this?
I'm new to Flash so, thanks in advance for your patience with me!
SabelV

Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct. Wish I knew how to rate your answer even higher. Thanks again!

Is it possible to adjust the placement of a still image within a clip in iMovie?

If I place a portrait format image in iMovie and click "Allow black" the image is automatically centred. I would like to range the still image to the left or right to allow for text etc within the frame, but I can't seem to find anything relating to this.

Here's one way you could do it.
First, create a project with just the still images you wan to use in your final project. Basically a slide show of the images you'll being using with their durations adjusted to approximate what they'll be in the final project.
Now Share that slideshow using Export using QuickTime and the Movie to Quicktime setting. Import the resulting movie as a new event in iMovie.
Next, start your final project. You'll want to lay down a clip of black first. If you don't have one lying around you can create on by adding a title with a black background but no text in it.
Now, with Advanced Tools checkin in iMovie>Preference select on of the still images in the event you just created and place it over the black clip and drop it in as picture in picture. Using the picture in picture adjustment you can move the still around in the frame.
Matt

Is it possible to adjust the interface of the Adobe products in the suites

I run my resiloution at 1600 X 1200 on both my moniotrs and when I open any Adobe product the words like "file,edit etc" are so small I can't see them very good, my tool bar is very small. If I lower my screen resiloution they get bigger but then every other software I use is huge. Adobe are the only software that this happens to, Can I adjust how big the menus and tool bars are, also the palettes. ??
Thanks in Advance

No.
Mylenium

Is it possible to adjust the strength of the bluetooth radio on the iPhone?

Similar Messages

Maybe you are looking for