Is it possible to allocate bandwidth to an application in an L2L tunnel?

Hi,
In an L2L tunnel, we wanted to allocate bandwidth for all users in Site A when accessing applications (Web-based and thick) in a server in Site B. The responses for both applications are not acceptable.
The same VPN link between the two sites is also used by other applications i.e. DC replication, etc. and the Internet link used for VPN is also used for SMTP and Lotus Notes.
In Site A, the tunnel is terminated outside of the PIX 7.2(2) and Site B is terminated outside of ASA 5510 7.2(2). The routers infront of these firewalls have PBR such that PAT?ed address from the firewall is routed to the ADSL instead of the serial interface.
If we?ll upgrade the Internet line, I have to make sure that it will resolve the issue.
Thanks in advance.
Regards,
Archie

Hi,
Thanks.
- The first challenge is where to apply QoS i.e. do traffic policing/allocate bandwidth for IPSec use. My guess is on the router but I'm not 100% sure.
-If on the router, what's the command?
- Once the first challenge is done, can I do traffic policing on applications inside VPN which are terminated on PIX and ASA?
Regards,
Archie

Similar Messages

  • Is it possible to read Barcode using Blackberry Application?

    Dear Friends,
    Is it possible to read Barcode using Blackbbery application? If yes please let me know what thing we'll be require to develop the same. It is very urgent please help me.
    Regards,
    Haidar Ali

    Yes, it is. There are already a number of barcode reader applications for BlackBerry, such as one named  "Edocrab".  Google it.
    You'll need some experience in Java development. Please see the Developer section of this forum.
    And here:
    http://na.blackberry.com/eng/developers/
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is it possible to run this Oracle based application ???

    Hello All,
    I have Oracle Forms/reports 9.0.4.1.0 installed on my windows XP.
    I am running Oracle based application from this box.
    here is the url for it:
    http://localhost:8889/forms90/90servlet
    Is it possible to run this Oracle based application on different PC on network through above URL?
    If yes, how to configure or set up this.
    Regards,
    DN

    From port number I assume you're using Developer suite. Remember that standalone OC4J is provided by Oracle for testing purposes only. You shouldn't use that in Production environment, where you should install Application Server, eventually the standalone Forms and Reports services (without infrastructure).

  • Is it possible to have a right-click application?

    Is it possible to have a right-click application for the iPad? 

    And this is for an iPad?  Somewhere there's some serious miscommunication if anyone thinks that you can left or right click on an iPad.  There's no mouse support, it's driven by taps with your finger.  If you are developing an app, you need to talk to someone on the developer forums about differentiating between a tap and a tap-and-hold to approximate left/right click behavior.

  • Is it possible to cal web dynpro java application using portal application?

    Hi,
    is it possible to cal web dynpro java application using j2ee portal application?
    If possible, how can it be done the parameter mapping over context area?
    Regards.

    you can just append parameter to the url as usual.
    you will write some code in the controller to get the parameters and set them to the context.

  • Is it possible to use cmsdk as stanalone application.

    Is it possible to use cmsdk as stanalone application.

    You can shut down the middle tier CMSDK instance and still access the CMSDK repository using the OC4J Container provided by JDeveloper. You can write a desktop Swing program that will do the same thing.
    However, given that this works, it implies that each stand-alone user has a direct connection to the database as there is no middle tier to pool database connections. So 500 users connected with stand-alone application would require 500 database connections.
    You also will lose any agents, servers, S_Tie classes, and other server side tools. You'll not have SMB, NFS, WebDAV, etc. as these are all provided by the middle tier. You also will have no administrator.
    You'll also probably be in a license violation unless you have the CMSDK running somewhere in an AS Standard Edition license.
    But it does seem to work fine, otherwise.
    Mark

  • Assigning Bandwidth to specific application

    Hi all
    Im sure there's technical terms for all this but basically I'm looking for a way to assign my ADSL bandwidth to individual applications...for example, if ITunes is downloading something, my safari browsing is very slow (I only have a 1MB ADSL line). So, can I get ITunes to only use, say, 50% of the available bandwidth so that the rest is more available? This is only one example and basically I'm wondering if there is a general way (or application) to tell OSX how much bandwidth it can use for whichever applications I have running.
    Many thanks

    Hi mhook,
    have a look at this article http://www.macgeekery.com/hacks/software/trafficshaping_in_mac_osx (is for OSX Tiger but should work for Leopard as well).
    But you might end using/buying an app like this http://www.intrarts.com/throttled.html
    Hope it helps
    Stefan

  • Is it possible to receive notification to my application or is it plan to be ?

    Is it possible to receive notification to my application or is it plan to be ?

    Let me second Dennis' comment.
    "And now for something completely different" (M. Python circa 1970)
    I use a different approach to getting the folder spec.
    See attached jpg.
    This sub-VI repeatedly strips a path until it finds the folder spec.
    This approach works in all environments including dynamically loaded VI in exe's.
    It should also be cross platform compatible, but alas I can not say that I have ever tried it outside a Windows environment.
    This method does not require any property nodes which can affect the thread the VI runs in.
    Offering another approach,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    Get folder.JPG ‏45 KB

  • Is it possible to allocate a fixed bandwidth say 500 Mbps for a given virtual machine in Hyper-V ?

    Is
    there any other setting in addition to Quality of Service that would reserve some of the bandwidth? I am having difficulty in utilizing hundred percent bandwidth for a VM. The
    VM does not receive more than 150 Mbps when 1 Gbps traffic is sent to it. 

    Also, this depends on the protocol.  And also the OS in the VM.  So, just because you have the potential does not necessarily mean you have the ability.
    Windows (barring a few applications such as backup agents) almost never uses 100% of its pipe.  Due to the protocols themselves.
    Linux can frequently be set to consume all of the available bandwidth.
    Now, how are you measuring that you are sending traffic at a rate that is actually higher than the receive rate?  Since the smaller pipe (greater constriction) always determines the rate of throughput regardless of the end it is on.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Is it possible to allocate a ringtone to a particular person in contacts

    I have an iPhone 5S. I would be very grateful if someone could tell me how to allocate a ringtone to a particular person in contacts so that I know who is calling me

    Sorry to bother you again but is it possible to make a purchased song into a ringtone?.

  • Is it possible to allocate more memory to PS Elements 9?

    PS Elements 9 states that available RAM is 3072 Mb. My system has 16 Gb so I would like to give a lot more to Elemnets if possible.

    PS Elements 9 is presumably a 32-bit application. That means it is incapable of using more than 3 GB of memory.

  • Is it possible to force some urls through the vpn using split tunneling?

    Hi all,
    just that. We have some urls accessible only from our office lan, and will be nice to allow the clients to split tunnel all but this specific urls.
    Possible? Thanks in advance!

    Simon,
    I was thinking that you were trying to reach a web server hosted on the LAN. I see now that you are trying to reach external sites that are only accessible from the LAN. I am not aware of any way to allow a partially split tunnel, if I find anything I will update.
    - Marty

  • Is it possible to install the Creative Cloud/Application Manager on a USB?

    I tend to use the Applications a lot and it would just be easier to install the creative cloud on my USB rather then the computers I go to, mainly because in order to install it on my school computers, it would require an admin password. So I was wondering if there was a way to possible install both the Creative Cloud Connection, and the application manager (along with apps) on my USB?

    Hi,
    Installing it on a USB(external hard drive) will not be a good idea as the products will not work on another computer if you connect this USB to it. In your scenario i will suggest you to use creative cloud packager(CCP) for deployment on other machine.
    details are available on http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager.html
    Thanks
    Kapil Malik

  • Is there any possibility to create ABAP Webdyn pro application in SAP 4.6C

    HI All,
    My client is in SAP 4.6C version want's to devlop some SAP ABAP webdyn pro application for their end user requirement.
    Is it possible to do so if yes how ,they are ready to buy the required H/W and S/W component for the same,but they can't upgrade SAP to higher version at this moment.
    As per my understanding WebDynpro for ABAP is dependent on current  R/3 version. For that one should have mySAP ERP 2005 I guess.correct me if i am wrong .
    Need your suggestion ..
    How to achive ABAP webdyn pro application in SAP 4.6C Version.
    Thanks,
    Dev

    Thanks!
    Note 1098009 - Limitations for Web Dynpro ABAP
    Solution
    SAP System Prior to SAP NetWeaver 7.0 (NW2004s)
    Web Dynpro ABAP is not released for official use in systems prior to SAP NetWeaver 7.0 (NW2004s).
    Hope that helps.
    Cheers,
    Chris
    edit - hmm hope I'm not taking a liberty quoting an SAP note ... If any mod's object - please remove quote - but I can't really see the harm in this case!
    Edited by: Chris Paine on Apr 30, 2010 2:12 PM

  • Is it possible to remotely start an exectutable/application on Real-Time target?

    Hi All,
    Apologies if this is an obvious question - I could not get an applicable answer using any search terms I could think of - and I am quite new to Real-Time programming.
    Is it possible to launch a headless real-time .exe (or uncompiled application saved on the RT machine) using an input from a remote VI - an .exe running on a Windows based laptop for example. I am currently building an application where my Windows based GUI communicates with the RT machine using shared variables. However I would soon like to hand my code over to a colleague who is going to test the application.I seem to recall that a .exe can be saved in a specific folder on the RT machine such that it will launch on start-up. However I would prefer to store multiple .exe's on the machine and allow my colleague to choose which one to launch.
    My first thought is to write a wrapper .exe (which will autolaunch) which can then launch any other .exe saved on the machine using the wrapper. However I would much prefer to launch the .exes directly and one at a time if possible - it seems a more elegant solution.
    Kind regards and thanks,
    Dave
    Solved!
    Go to Solution.

    Well there is certainly a way to do it but NI does not expose that method.  You can however programmatically reboot a RT target and also you can use the FTP vi's to rename the 'startup.rtexe' file that will autorun on reboot.  Good Luck!

Maybe you are looking for

  • Cannot delete files from batch file

    This is a test case. If  have the following in a .bat file. If I run it from CMD box, it works fine. forfiles /P c:\scripts\ /S /M u_ex*.log  /C "cmd /c del @PATH" > c:\scripts\output.txt But If I run it from a scheduled task, it generates the output

  • Prepared statement error

    hello friends, iam using the following code when i tryo to compile it gives the error as follow <code> import java.sql.*; import java.util.*; class DbDemoPrepared public static void main (String args[]) throws SQLException Class.forName("com.mysql.jd

  • The Summary Report is pulling an incorrect question?

    I used a previous survey to construct a new one and the Summary Report is pulling in a question from the old survey and that question was changed for the new survey.  I deleted the incorrect question from the Summary Report but now the correct questi

  • How do I make more room in Icloud?

    I get the message! Can not back up to Icoud because there is not enough space!  How can I free up space?

  • Installing Flex Builder with MyEclipse

    I am trying to get Flex Builder to install a plugin for eclipse. I have read that the installer is having an issue seeing the configuration directory, and there is certainly something wrong with my install. The only solution I found online says that