Is it possible to allow ICMP ping responce on the public interface for WRT54G?

Hi I need to remotely monitor a WRT45G from a remote host on the Internet. As such, I want to allow ICMP ping replies on the public Internet interface. However, I have found no feature to allow me to do this. Similar Netgear devices do allow this feature. I suspect the answer is, "you can't do that".

Yes this is possible. I just managed it on a WRT54GL.
On the routers default configuration page: 192.168.1.1 (or whatever you set it to) select the Security-tab, click sub-tab Firewall, uncheck the box next to "Block Anonymous Internet Requests", save settings. - I guess there's a risk involved, but it works.

Similar Messages

  • Slideshow page appears to load all images at once making it very slow. Is it possible to force it to load just the required items for the immediate page / slide

    Hi Everyone
    First post and a Muse / Web Noob.
    Im building my personal website with muse ( CC and now CC 2014 ) , its quite simple with slideshows embedded inside each other and is just 4 pages in total.
    My two slideshow pages appears to load all images at once making it very slow ( plus 20 secs on my system ). Is it possible to force it to load just the required items for the immediate page / slide. It would be so much faster and would work much better in this particular situation.
    Ive built all the images and icons at the correct size so optimisation shouldn't be an issue. The whole site is only about 42mb.
    www.paradoks.co.uk
    Many thanks
    Deck

    Oh well the problem seems to have fixed itself. It seems it was either a Java or Tumblr problem because the same thing happened when I installed Chrome. It is a lot more stable now and no more crashes yay.

  • Possible to have multiple cluster members in the same JVM (for unit tests)?

    Hi,
    I'm wondering if it's possible to simulate multiple cluster members inside of a single JVM. I'm looking to unit test my code and it would be great to write cases for various boundary conditions.
    This could certainly be done with multiple JVMs but would be more difficult to run in something like cruise control etc.
    TIA,
    Danny

    Hi Danny,
    I do not know how to accomplish what you are asking for and run several Coherence nodes in a single JVM, but I have written a JUnit base class that starts a configurable number of nodes (each in its own JVM) and provides some other useful methods for unit/integration testing with Coherence, such as method to clear all caches or to load test data from the CSV file.
    It is still a work in progress and you might need to tweak things a bit to make it work in your environment, but it will at least give you a head start.
    Shoot me an email if you are interested and I'll send it to you (you can find my email in my profile).
    Regards,
    Aleks

  • Is it Possible to have videos and music in the same playlist for Apple TV?

    Hi
    I'm new here so apologies if this has been asked before but is it possible to create a playlist that contains music AND videos to play on Apple TV?
    Thanks!
    Mark

    In Settings somewhere there's a Playlist option to show All Playlists - if it's only set for music playlists it may be ignoring any other media.
    Will test later.

  • Is it possible to merge a .fdf file with the IOS application for Adobe Reader?

    I receive .fdf files via email that merge with a pdf template on my PC. I would like to do this on my Ipad but can't see any way that this would be possible. Does anyone know how this can be done? If not are Adobe looking at making this function possible in the future?

    wildcat24,
    Currently, Adobe Reader mobile products do not support import of FDF files.
    Sorry, I am not able to speculate on features in future releases.

  • How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

    Hello,
    i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
    In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
    I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
    All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
    Any idea?
    Thanks for your help!

    Hmmm....
    How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
    "Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
    Not sure on the above.
    Please correct me if this is wrong!
    Ben
    Message Edited by Ben on 07-19-2007 08:26 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Is it possible to have the synthesizer interfaces for the included LOGIC PRO synths in MainsStage as a standalone?

    I recently purchased MainStage as they included the instruments from Logic Pro and In the help files it shows the LOGIC synths with the nice GUIs for each included synth; but it seems you have to recreate all of the parameter controls for each synth if using only MainStage as I can not find how to view the synthesizer interfaces.  Does anyone know if this is the case or is there a way to tweak the synths using the nice already layed-out interfaces that are in Logic?

    Hi
    Locate the Instrument plugin in the Instrument Channel Strip and double click to open the plugin GUI
    CCT

  • How to enable/allow IPv6 ping requests

    My IPV6 provider sixxs.net needs to ping my end of the IPV6 connection. It looks like the working AEBS tunnel that I have setup is not responding to pings. Strangely the public IPv4 address seems quite happy to respond.
    How can I get the AEBS to respond to IPV6 ICMP requests?
    This is urgent as sixxs.net will disable my tunnel if they cannot reliably test connectiivity.
    Thanks,
    Adrian

    Thank you! I can't tell yet if that solved the problem.... I was able to click a few more facebook ads, but haven't seen the original one yet and don't know if there was something different about it. I did add the couple of websites I wanted to allow pop-ups for, and I'll test out the USPS one with my next shipment. I just updated yesterday to whatever the latest version of firefox is, and this time it seems like there are more changes than previous recent updates which I'm not used to yet. Since I visit new sites regularly, I'd like to be given the option with each one to allow the pop-up right on the spot, vs. having to go into the settings and add that particular website that I may or may not visit again. Unless I'm missing something, that seems kind of inconvenient.

  • HT201250 Is it possible to use Dropbox or Microsoft OneDrive as the backup disk for time machine?

    I have a MacBook Pro for which I have not set up Time Machine. I have a Dropbox account and a Microsoft OneDrive account, each with plenty of space to serve as backups. Is it possible to use either of these as THE backup disk for Time Machine? It doesn't appear intuitive from Time Machine on my MBP.
    Thank you.

    No. Time Machine does not work with "cloud" drives.

  • Possibility of adding the 3rd interface as a 2nd Public interface?

    Is it possible, with VPN 3030, to configure the 3rd interface (which is labeled as "External" and, is usually used for "management", I assume) as another Public interface? So that two different kinds of VPN connections can be physically separated....
    Any help and pointers will be much appreciated! -Bill

    Hi Aamir,
    I am having problem to understand the use of External interface of VPN3000.
    Does it mean I can have a VPN3000 with two Providers? Public interface terminates to ISP 1 and External interface terminates to ISP 2 ?
    Regarding the routing (only one default gateway) does it mean the following traffic flow ?
    1. Incoming traffic from ISP 1 will go to the Public interface and outgoing traffic will go through the same Public interface.
    1. Incoming traffic from ISP 2 will go to the External interface , but outgoing traffic will go through Public interface.
    Thanks,
    Engel

  • Allow ICMP to DMZ

    Hello,
    Need some help to allow ICMP from the internet into our internal DMZ.
    We have a ASA 5505 with IOS 8.4 with three networks configured. Inside interface 192.168.1.x, outside interface 98.101.206.x, DMZ interface 172.16.5.x we need anyone from the outside or internet to have the ability to ping the DMZ and the servers we have.
    We need to know is this possible, if so can you show how to setup the ACL's to allow this.
    Thank you

    I will try to summit everything you need from the running-config
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network obj-172.16.5.2
    host 172.16.5.2
    object service FTPS
    service tcp source eq 990 destination eq 989
    description FTPS_DMZ_FTP_Server_11-29-12
    access-list outside_access_in extended permit object FTPS any object obj-172.16.5.2
    access-list outside_access_in extended permit tcp any object obj-172.16.5.2 eq ssh
    access-list outside_access_in extended permit tcp any object obj-172.16.5.2 eq https
    access-list outside_access_in extended permit tcp any host 172.16.5.2 eq ftp
    pager lines 24
    icmp unreachable rate-limit 1 burst-size 1
    icmp permit host 172.16.5.2 outside
    icmp permit any PCSFTP
    nat (inside,outside) source dynamic any interface description PAT_Inside_Outside_on_MPLS_Circuit
    object network obj_any
    nat (PCSFTP,outside) dynamic interface
    object network obj-172.16.5.2
    nat (PCSFTP,outside) static 98.101.206.51
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 98.101.206.1 1
    I hope this is all you need, if not please let me know
    Thank you

  • Is it possible to allow the user to highlight specific label in the GUI.

    i have an existing GUI tt allows user to key in records of information eg, patient records in a hospital system.
    and display them based on wat the user key in for the patient's id no:
    is it possible to allow the user to highlight label in the GUI.
    Label as in information like Illness:<Red>Cancer<Red>
    for tt customer only.
    and re open the file to have the color still there.
    i serialized my vector of objects into a file, and have the gui to retrieve them upon execution.
    color wise i m lost.
    one solution is to have a corresponding Color attribute to each of my other attribute in all my other classes.
    besides this, any idea how to do it?
    i also did a search on java map..
    couldn't really find sth useful abt it..
    seems like few ppl know how to use it well..
    API doesn't seems to show how i can use it to reach my objective.
    anyway, i hope the user can highlight A attribute of a record and not highlight the entire record..
    tt's why i find it soo cumbersome to have another Color object created for each atttribute.
    eg:
    patientId, patientName, etc.....
    thanks in advance

    Several Swing components understand HTML tags, eg JLabel, which is VERY useful, as in the previous example.
    Are you asking "how do I highlight a field" or "how do I make it remember the color it has"?
    As Color is itself Serializable, why not store your data in a Hashtable not a Vector?

  • Is it possible to allow use to type entry into a drop down list box ?

    Hi ,
    Is it possible to provide  type in the value option ( provide option to user like he can select a value from the extracted data in a drop down list object and also he can enter a value manually ) to a drop down list box on an interactive form ?
    Nanda

    Hello Nanda,
    In the Adobe LiveCycle Designer you can specify several list items for objects of type 'Drop-down List' and it is also possible to allow custom entries (checkbox: "Allow Custom Text Entry").
    Regards,
    Philipp

  • ACE 4710: Possible to allow a user to clear counters but nothing else?

    Hello all,
    Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc.  We would also like to allow this user to clear the interface error counters as well, but nothing else.  Is this possible?
    Thanks!

    Hello Brandon-
    Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats.  You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
    i.e.
    ACE# conif t
    ACE(config)# role MyRole
    ACE(config-role)# rule 1 permit modify feature ?
      AAA             AAA related commands
      access-list     ACL related commands
      connection      TCP/UDP related commands
      fault-tolerant  Fault tolerance related commands
      inspect         Appln inspection related commands
      interface       Interface related commands
      loadbalance     Loadbalancing policy and class commands
      pki             PKI related commands
      probe           Health probe related commands
      rserver         Real server related commands
      serverfarm      Serverfarm related commands
      ssl             SSL related commands
      sticky          Sticky related commands
      vip             Virtual server related commands
    You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
    Domains allow you to create containers for objects.  You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
    Regards,
    Chris Higgins

  • Is it possible to allow the user to revoke its own it resource?

    Is it possible to allow the end-user to somehow revoke its own resource?
    What would be the correct approach if he decides that he doesn't need access to a specific system and decides to terminate his account ?
    Thanks for any insight.
    Adriano.

    One way by creating dummy resource, he will raise a request but no approval will be triggered (if you want then you can modify).
    In the provisioning workflow call the OIM APIs.
    Second approach I have to look into it.

Maybe you are looking for

  • A simple dialog with semi-transparent border (MFC)

    Hi, I have to make a image dialog with semi-transparency border in MFC. I had web surfing all the day and found this solution in the codeproject. http://www.codeproject.com/Articles/42032/Perfect-Semi-transparent-Shaped-Dialogs-with-Stand But it crea

  • Objectlevel Security in SAP BI

    Hi Gurus, Implementation of Object level security in BI system. Customer is looking to Implement BI security model for a new piece of functionality that they are setting up in BI (Commissions processing) specifically in the area of SD (Sales Distict,

  • Unable to delete row or amend transaction in Cash Journal

    Dear All, I tried to post an amount in CJ.   The tax amount should be zero.  I have selected the zero tax code. System is not allowing for posting.   Unable to delete or reverse the transaction. The followng msg shown in the check box "Tax does not e

  • How do I get my money back I am unable to download your program

    Since my iPad will not down load the program I am requesting my money back. I read about your program on an iPad I signed up on an iPad and you did not say one word about it. Now I feel scamed and I will not lay down.

  • Macbook Air 1,1 (Jan 15 2008) needs upgrade ram

    Macbook Air 1,1 (Jan 15 2008) Core2 Duo 1.6ghz processor, 80gb HD, 2gb Ram Can it be upgraded to 4gb? Tech specs do not help because there is no indication for upgrade nor mention of slots. Does this mean ram is soldered to mother?