Is it possible to alphabetized the address panel in Mail?  It is alphabetized in iCal.

What happened to the address book on the top of the mail page that showed up on Snow Leopard when you were writing a new email?  I don't know where to find that on OSX Lion.

George
How are you address listed in your Address Book, I think they should show up in mail the same way.
Some thing to try is open Address Book then under Card in the upper menu bar, go to
Reorder First Name before Last, and click on that once or twice, Last Name before First then back to First Name.
Also make sure with in the Address Book that all of your names are in the correct box, ie First Name, Last Name
Mike

Similar Messages

  • HT2500 Does anyone know how to remove a group from the address panel in mail?

    Does anyone know how to remove a group from the address panel in mail?

    I haven't seen too many questions like this on this forum.  Did you also try the photoshop forums?

  • Group name shows in the Address Panel, but when I click on it the addresses do not appear. It only happens with this group.

    I send emails to a list that is divided into four groups.
    Recently the fourth group has stopped working.
    It has seventy addresses in it.
    The others have between 70-100 and work fine.
    When I type the name of the other groups into the address panel and click on it the addresses all appear.
    When I do this with the fourth group only the name appears and not the addresses, so it does not send.
    I now have to put each address into the panel individually which is time-consuming and annoying.
    Please help if possible. Thanks.

    Assuming you are talking about Logic Pro X.... (You may want to update your Equipment list that shows below you post btw)
    Go to Logic Pro X's preferences and turn on all the advanced features under the Advanced Tab...
    Now LPX will be running under the full Logic Pro mode and not the cutdown 'Garageband Pro' mode and the missing features will be present.

  • Is there a way to have the address panel open automatically when opening Mail in Mavericks?

    Before upgrading to Mavericks, Mail panels such as the Address Panel would open if they were open last time quit the program. Now I can't see a way to have this happen. I have to manually open these.

    You can add the Address Panel to the toolbar for easy access. Personally, I just start typying and let Autofill enter the email address I want.

  • For printing: Is it possible to organize the address book in columns to save space in printed page? Otherwise the right half of the page remains empty.

    In the old Outlook Express it was possible to organize the address book printed page in double columns so you don't need to waist half of the page leaving empty areas. I can't find the way to do it in thunderbird. Thanks for your help.

    I don't have a calendar to test this, but you may have some success following these instructions:
    https://kb.wisc.edu/helpdesk/page.php?id=22769

  • Is there possibility to use the front panel without installing Labview?

    Hallo,
    i have two small questions:
    1- Is it possible to use the front panel of a labview software without needing to install Labview itself? i mean something similar to the "power point viewer" which can view the Power Point files without installing the microsoft office.
    2- In an intensity Graph, how can one change the color?
    thanks.
    Solved!
    Go to Solution.

    Hi,
    Regarding your questions
    1)You need to have Labview and Application builder installed on your machine. If you have that you can make an stand alone application (EXE) and then you can deploy it on systems that does not have LabView and can view it, However you will not be able to see the block diagram.
    Here is a link that explains how to do so
    http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/exe_ex/
    2) You can either do it by using propery node or marker method. The following link explains it
    http://digital.ni.com/public.nsf/allkb/1ADFF221E27F5B5886256E6F007C7B58?OpenDocument
    Hope it helps.
    Regards,
    Fawad
    Fawad Nisar
    Applications Engineer
    National Instruments UK & Ireland

  • I have an issue with the address browser in mail in Yosemite

    I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
    Previously in my pending to send email toolbar there was a contacts icon which I clicked  on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
    Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
    An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
    This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
    Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
    I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
    Any suggestions?
    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    Cheers,

    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

  • How can I sync the address book from Mail to my Address book?

    Ok, I open a new message and click on the Address Book icon in the new message to find my contacts on the address book, I choose the group I am looking for and the group has people on it that I have already deleted from my address book! How can I sync the address book from Mail to my Address book?

    It is using the same database on disk. You may have to re-launch Mail.

  • Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    you can't really, but you might be able to filter them by message content into folders for each, or color them with tags

  • How do I hide the "preview panel" in Mail. Double clicking the "separator bar" hasn't worked ( I think I know where that bar is.)

    How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.

    Maggie 6 wrote:
    How can I hide the "preview panel" in Mail? Double clicking on the "separator bar" , as directed by Mail Help, does nothing. ( I am not certain where that bar is, but believe it to be the zone where the preview panel and the message space meet.) This issue only arose after I upgraded to Mavericks.
    The only way I found to hide the "preview panel" is to drag the separator to the edge of the window. It shrinks the panel down to perhaps 1/2 inch in height and then disappears only when you drag it to the bottom (classic layout) or perhaps a couple inches wide (in the new layout). It is also annoying to me that you can double click to open the preview panel but you cannot repeat that to hide it. [sigh]
    I submitted feedback about the help file as well - you may want to do the same. I could not find the double click mentioned in the new "Mail Help" - I know it was in the old version.

  • Was wondering if it is possible to sync the folders in mac mail on my imac to my mac book pro rather than recreating them

    was wondering if it is possible to sync the folders in mac mail on my imac to my mac book pro rather than recreating them

    There are two standard protocols for receiving email, POP and IMAP. In the POP (Post Office Protocol) when messages are "read" by your email client (Mail) they are downloaded and stored on the reading computer and deleted from the POP server. When you are using IMAP (Internet Message Access Protocol) the messages remain on the IMAP server until they are deleted. IMAP was created for exactly the situation you are trying to achieve. For example Apple's iCloud (formerly me.com, formerly mac.com) uses IMAP protocol. So whether I access my email on my Mac, my iPhone, my iPad, or via webmail I have access to all the files in all the various mailboxes automatically because they are all seeing and using the same online mailboxes. If I delete a message on any of the varioius devices it is deleted on all of the various devices.
    Whether you can use IMAP protocol or not depends on your email host and whether they have an IMAP server or not. Many ISPs do not offer IMAP because they do not want to bear the expense of the additional disk space required to store the IMAP messages. As I mentioned before Apple's free email service is by default IMAP. Google Mail offers a somewhat non-standard IMAP service. It works with Apple's email client, Mail, but it is just a bit "different".
    Personally I resisted using IMAP for years. Largely because I had always used POP and was comfortable with it. Once I got an iPhone and needed to synch my email between my computer and iPhone I realized IMAP was "the only way to go."

  • A few months ago, my G5 started up with the address book and mail opened at startup. They are not in startup items, and I cannot get this to stop. Any suggestions?

    A few months ago, my power mac G5 began starting up with the address book and mail already open on the desk top.
    Neither of these is in my startup items, so I am at a loss as to stop this behavior.
    Any suggestions?

    Are they in Login items under System Preferences/Users/Login Items?
    In the Dock, right click the Address Book and Mail icons, select Options, and make sure "Open at Login" is not selected.

  • Is it possible to have the front panel on the iPad 2 replaced with a different color?

    I have a  WiFi-3G verizon 64GB BLACK iPad 2, when I bought it, black looked the best at the time. but now, it seems that white looks ALOT better and actually makes the screen look bigger . I was wondering if it was possible that if the front glass (not the LCD) can be replaced with a white one. As far as i can see, all of the connections and clips SHOULD clip into place just like the black panel. there should be no problem. the only problem i could see is that the apple store will refuse to install it because of some bullsh** reason. If that happens, i will buy the panel, then go to iFixit or something like that and see if they will take my money.  So if anyone can shed some light on my situation, that would be GREAT.  THANKS

    my step mother got an ipad against my advice to wait for the new ones and she got a white one, and seeing how clean, pure, open and free the white one seemed compared to my black one, which (athough i polish habitually) look sad, dark, grimy and "trapped", i wanted to get the panel swapped. i thought i could maybe pull off an "oh crap i 'accidentaly' dropped my ipad and the screen broke" but that seemed utterly useless as they would just replace it with a black one.

  • Is it possible to change the address in the replacement program for the ipod nano 1G?

    I 'm already sign up in the replacement program of the ipod nano 6G and the emply box has already been send. But later, I noticed that the address wasn't complet. So my question is if and how I could change my address.

    There currently isn't any contact information or support from Apple in regards to this specific replacement scheme. I know it's quite frustrating, but Apple have not offered the best customer care in this situation. My only other piece of advice would be to go to an Apple store if possible. Speak to somebody and explain your situation..they may be kind enough to call through for you.
    I am positive that there is not any means to contact Apple via an online form or by email.

  • Is it possible to replace the back panel on an iPad Mini 2?

    My girlfriend has managed to dent the back panel of her iPad Mini 2 and I was wondering if it is possible to get a panel replacement or not?

    If you take it into an authorized repair place the fee will be $219.
    If you take it to a non-authorized repair place it may be cheaper but doing so will void your warranty
    If you have apple care plus then the replacement fee will be $49 (last I knew) under the 'two instances of accidental damage replacement)
    Call your local Apple store to be sure, but last I knew they don't replace parts as much as that fee is to exchange your damaged device for a replacement, so if you do it, be sure to back up your device before you take it in

Maybe you are looking for

  • Strange beeping sou

    Sometimes when I turn on my Zen Micro instead of booting up it freezes at the Creative opening screen and then starts beeping, it beeps in a kind of pattern, i dont quite know how to explain it. The only way I can get it to do anything though is by t

  • Counter using PCI-6602 for multi output

    Hi guys, currently I tried to control a linearmotor using PCI-6052E and PCI-6602. The questions is, how to use PCI-6602 to be a counter which will be converted to several output (multioutput): (1) converted to position >> 1count = ...[mm] --> positio

  • Can I move existing time machine backups to new, larger disk?

    I have used Time Machine with success for a long time. Now I have a much larger disk drive and want to move the old backed up files to the new drive, then continue building files after that. The current Time Machine backup file's Info says it is --ge

  • Syncing Notes to PC and vice-versa

    Hello, I have iphone 3gs, Windows 7 and Outlook 2003. Since I upgraded the IOS to 4.0 from 3.0 notes has stopped syncing. It used to work with IOS 3.0 and Outlook 2002, I thought the Outlook 2003 upgrade might fix it. I also use Hotmail via a POP3 ac

  • ResultSet to Collection conversion

    I have a query that return 5-20 rows. Is there anyway by which, I can convert ResultSet output into any Collection object, where values of Connection object again contain a Connection object that represents field values?