Is it possible to apply effects at an increasing rate
I guess i would like is to apply effects like reverb or detune that start off suttle and reach a peak i choose and contuniue till i want them to either fade away or stop? i believe this would be some kind of morphing or variable intensity included with an effect.
Sorry... Clicked send too soon.
To get a similar Wet/Dry effect you could copy the clips to another track and add the full effects to that. Then use the gain/volume automation to set the level of effects on the track you created.
In some effects you can set the effect level to 100% and the dry mix to 0% and then just use the tracks Automation to mix the effect. But some effects mix the dry sound without giving you control of how much. In that case, you may need to adjust the gain/volume automation of the original dry track to match the levels in the mix.
Ok... I think I got that right...
Similar Messages
-
Feature Request: Apply effects to group of clip instances
I have been trying to supply this feature request into the Adobe feedback form. But it appeared that it was too large to be posted in a single feedback form. So I had to split it into three distinct feedback forms.
I don't want this feature request to get lost just because those three parts can't be joined back into a single feature request again. So I'd like to post it here, requesting for comments, too...
This feature request is about applying effects to more than one clip:
a)
Currently, when selecting more than one clip, it's not possible to change any effects settings. The Effects Settings windows only shows a "Multiple clips selected" message.
Thus, I'd like to suggest the following:
When selecting more than one clip, the Effects Settings window should display any effects that apply to all the selected clips. Moreover, only those effect parameter values should be displayed having the same value across all selected effects. This on the other hand, of course, can only be displayed for effect parameters not having key frames/timing activated.
Editing any of the displayed effects' parameters should apply the new value to each currently selected clip instance.
b)
Then again, when using key frame/timing activated effect parameters, it is currently not possible to apply such effect to more than a clip, too. To apply such animated effects to more than one clip it is currently necessary to nest those clips into a separate sequence.
Thus, I'd like to suggest the following improvement:
It should be possible to apply effects not only to clips but also to a group of clips (Menu Clip > Group).
Activating animation/key framing to any of the effect settings of those effects being assigned to a clip group (in contrast to those effects assigned to any clip instance contained in the the group) will allow to add key frames spanning all clips of the group.
This way it will be possible to easily create, e.g., a zoom effect spanning several clips.
If there are clips in-between those belonging to the group, the group's effects won't be applied to those clips not belonging to the group. However, the effects' parameter values are continued to be calculated in the background.
So this example would be true:
- Available clips:
| a | b | c | d | e |
- Clips grouped into a Clip Group:
| a | | c | | e |
- Zoom video effect applied to the group, having two key frames added:
Key frame #1 = beginning of clip | a |
Key frame #2 = end of clip | e |
Zoom value of key frame #1 = 100%
Zoom value of key frame #2 = 400%
--> So this will be the approximated calculated zoom value when the timeline reaches following points in time:
Beginning of clip | a |: 100%
End of clip | a |: 132%
Beginning of clip | b |: (100%)
End of clip | b |: (100%)
Beginning of clip | c |: 174%
End of clip | c |: 230%
Beginning of clip | d |: (100%)
End of clip | d |: (100%)
Beginning of clip | e |: 303%
End of clip | e |: 400%
(Unfortunately, this forum doesn't allow me to apply any kind of formatting to the example above. So I can't apply a monospace font or colouring )
When a group gets ungrouped (Menu Clip > Ungroup), effects that had been applied to the group will be assigned to each individual clip of the group. For effect parameters that had key frames/animation activated, key frames will be created at the beginning and end of each of the clips. The previously calculated values will now be inserted at each automatically created key frame to mimic the grouped effect behaviour. This operation then would finalize the Ungroup operation involving clip group effects.
Regards,
Axel DahmenYou could combine the Next/Previous Edit commands with either the Apply Video Transition shortcut or with a paste command if you had copied the transition you want.
OR... much easier if all you want is a bunch of consistent fade ins/fade outs...
On a single clip, keyframe opacity to create a fade in from the in point of the clip at the duration you like, e.g. 30 frames. Right click Opacity, and select Save Preset; give it a name, e.g. Fade In 30 Frames and set it to Anchor to In Point. Reset the effect and delete the keyframes, and then repeat this to create a fade out. Go to the out point of the clip, set keyframes, and once again, right-click Opacity and Save Preset; this time call it something like Fade Out 30 Frames and set it to Anchor to Out Point.
Now, you can simply select all of your clips in the sequence, and apply these presets by dragging them to the selection. Even though you created two presets, because you can only have one instance of Opacity on a clip, the keyframes from both presets will be added to that single effect. You have to do this with two presets--if you do it with one and use Scale, the keyframes will stretch out or compress to maintain a relative duration instead of an absolute duration. -
Is it possible to apply a stroke effect to a Photoshop image in After Effects?
Hello,
I've imported an image (a maze) from Photoshop into AE, and I want the image to appear as if it's being drawn in using the Stroke animation. Is it possible to apply some kind of path along which the image can "fill in"--similar to how you can do this with text? I didn't see a way to convert the image into a shape layer on which I could apply the Stroke effect, either.
Thanks to everyone who's been so helpful in these forums--I've gotten a lot of questions answered by y'all!
meredithFollowed everything you said up until using the solid as a track matte, where I got a little confused.
The effect worked more or less how I wanted when I set the starting value of the stroke at 100% and set track matte of my original image to Alpha Inverted. When I did this, it gave the effect that the solid was disappearing to reveal the original image, if that makes any sense.
Is there anyway to adjust the brush shape? Right now it is a circle, is it possible to change it into a square? The circle brush gives an awkward edge line as the lines of the image begin to appear with the stroke effect.
Thanks! -
Best practice regarding work flow (cutting, applying effects, exporting etc)
Hi!
I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to have it confirmed. If you've been following the "Very disappointed with Premiere Elements" thread, you know I'm not a fan of how the applying of effects works, when having a lot of cuts between scenes and clips etc. A few of the steps below is meant to make that process more effective.
So, here's my idea, from the begining and in detail:
1. Download the appropriate clips from the camera (in this case 1280x720, H.264 mov's from an EOS 500D).
2. Create a PrE-project for each clip and maybe trim the in and outs a bit, if needed.
3. Export each clip to uncompressed avi's.
4. Create the main project file and import all the uncompressed avi's.
5. Insert the clips in on appropriate tracks in the timeline.
6. Do all the cutting, triming and sync as complete as possible, without thinking about effects.
7. When finished, open up each of the smaller clip projects and add the desired effects. This will mainly include contrasts, color corrections, noise etc, in order to get the right look and feel to each clip/scene.
8. Again, export the clips to uncompressed avi's and overwrite the previous versions.
9. Open up the main project, which now should contain the clips with look-and-feel effects visible.
10. Add some additional effects if needed.
11. Export/share, and you're done.
Of course I will end up going back and forth through these steps anyway, but as a basic plan it seems reasonable. I see three main positive aspects:
1. The look-and-feel effects will be applied on the raw material, before the converting process. This should result in a slightly better quality. Perhaps not noticeable, but anyway.
2. The main project will be more CPU friendly and easier to work with.
3. If I want to tweek the look-and-feel effect to a clip/scene, I don't have to do it on every split (I will have a lot of splits, so applying and changing the effect parameters will be time consuming and ineffective). Of course, opening up the clip's specific project, changing the effect and then export to avi, will also take time, but point 1 and 2 makes up for that.
Have in mind that it is a music video project, to put things in the right context. We'll probably have a few parallel stories/scenes, with lots of cutting in and out between them. The timeline will probably look insane.
So, am I thinking in the right direction here? Any traps I might fall into along the way?
Regards
FredrikFredrik,
Though similar to your workflow, here is how I would do it.
Import those "raw" Clips into a Project, and do my Trimming in that Project, relying on the Source Monitor to establish the In & Out Points for each, and also using different Instances of any longer "master Clip.". I would also do my CC (Color Correction), and all density (Levels, etc.) Effects here. Do not Trim too closely, as you will want to make sure that you have adequate Handles to work with later on.
Use the WAB (Work Area Bar) to Export the material that I needed in "chunks," using either Lagarith Lossless CODEC, or UT Lossless CODEC *
Import my music into a new Project and listen over and over, making notes on what visuals (those Exported/Shared Clips from above) I have at my disposal. At this point, I would also be making notes as to some of the Effects that I felt went with the music, based on my knowledge of the available visuals.
Import my Exported/Shared, color graded Clips.
Assemble those Clips, and Trim even more.
Watch and listen carefully, going back to my notes.
Apply any additional Effects now.
Watch and listen carefully.
Tighten any edits, adjust any applied Effects, and perhaps add (or remove existing) more Effects.
Watch and listen carefully.
Output an "approval" AV for the band/client.
Tweak, as is necessary.
Output "final approval" AV.
Tweak, as is necessary.
Export/Share, to desired delivery formats.
Invoice the client.
Cash check.
Declare "wine-thirty."
This is very similar to your proposed workflow.
Good luck,
Hunt
* I have used Lagarith Lossless CODEC with my PrE 4.0, but have not tried UT. Both work fine in PrPro, so I assume that UT Lossless will work in PrE too. These CODEC's are fairly quick in processing/Exporting, and offer the benefit of smaller files, than Uncompressed AVI. They are visually lossless. The resultant files will NOT be tiny, so one would still need a good amount of HDD space. Neither CODEC introduces any artifacts, or color degredation. -
Audition 6 Crashen when previewing or applying effects
Hi
I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp. I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
These are the errors that show up acording to System info.
21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
Heres what shows up on my Audition log.txt file
Log file created: 22/11/2013 10:14:59 AM
Ticks = 0 <2912> <AuLog.Startup> <5> Application: Audition
Ticks = 0 <2912> <AuLog.Startup> <5> Version 5.0.2
Ticks = 0 <2912> <AuLog.Startup> <5> Build: 7
Ticks = 78 <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
Ticks = 78 <2912> <AuLog.Startup> <5> Initializing Crash Recovery
Ticks = 78 <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuDSP
Ticks = 2044 <2912> <AuLog.Startup> <5> Initializing AuBackEnd
Ticks = 2138 <2912> <AuLog.Startup> <5> Initializing AuApplication
Ticks = 2247 <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
Ticks = 2247 <2912> <AuLog.Startup> <5> Initializing XML Loader
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Application Settings
Ticks = 2262 <2912> <AuLog.Startup> <5> Intializing dva unit test and console
Ticks = 2262 <2912> <AuLog.Startup> <5> Initializing Audio Device
Ticks = 2325 <2912> <AuLog.Startup> <5> Initializing XMP System
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing AMIO Host
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
Ticks = 2340 <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
Ticks = 2340 <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
Ticks = 2340 <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
Ticks = 2340 <2912> <AuLog.Startup> <5> Initializing Preset Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing Favorites Manager
Ticks = 2372 <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
Ticks = 2372 <2912> <AuLog.Startup> <5> Initializing AuUI
Ticks = 2403 <2912> <AuLog.Startup> <5> Setting up temp directories
Ticks = 2528 <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize PRM
Ticks = 2652 <2912> <AuLog.DisplaySurface> <5> Initialize DS
Ticks = 2652 <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
Ticks = 2652 <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> DS Initialize succeeded
Ticks = 2746 <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 2918 <2912> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 13214 <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 13229 <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 17332 <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
And here are some quick specs acording to System info
Item Value
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHRISNEWMBOOK
System Manufacturer Apple Inc.
System Model MacBookPro11,3
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ChrisNewMBook\Chris New MBook
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.5 GB
Total Virtual Memory 31.8 GB
Available Virtual Memory 29.3 GB
Page File Space 15.9 GB
Page File C:\pagefile.sys
The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
Can you please help me out?
Thank youBecause my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
Anyway I just want some help fixing up Audition for windows. -
Apply effect to an area of the video - eg, blur a license plate
Hello,
Is it possible to apply an effect to an area on the screen? Eg blur a license plate or someone's face?Hi(Bonjour)!
Yes it's possible to apply any effect on area of a clip only. Simply duplicate the footage in timeline, apply the filter and use a 4 or 8 point garbage matte to isolate the desired portion.
For blur/witness protection, there are many free plugins on the WEB that apply witness protection/blur on the clip like Andy's region blur:
http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/3/19_Andy’s_Region_Blur3.html
Michel Boissonneault -
Applying effects to multiple clips or an entire sequence on a separate video track
I'm looking for an easy way to apply effects on a separate video track. In AVID I would just drag and drop the effect preset onto a blank layer. Or if I wanted the clip to affect just a few clips, I would add two edits (similar to razor blade) on a separate video track and drag the effect preset between those edit points. Is there a way to do this in Premiere Pro? Running CS 5.0.4. Thanks for the help!
Well, depending on what you want to do, you might actually be able to use a clip instance of one sort or another.
One option is Transparent Video (File > New > Transparent Video); by itself, Trans. Video doesn't do anything, but some effects can be applied to it and will generate an output. This doesn't work with all effects, so you'll have to experiment. Check here for more: Create a transparent video clip
Another option would be to use a Color Matte (File > New > Color Matte) or Black Video (File > New > Black Video) clip. These do have an effect by themselves, so you could apply any effect you wanted to them, and then possibly use a Blending Mode to apply it. Black Video is common for this purpose, with something like the Add mode. Again, not perfect, but it will depend on the effect you're trying to achieve.
Unfortunately, we don't have anything like AE's adjustment layers in Premiere Pro. That would solve your problem, quickly. -
Applying Effects: Dragging the Only Way?
Is dragging the only way to apply effects / presets to a clip?
Are there no keyboard methods / shortcuts to do this?As Harm says, there is only one, the Default Transition (that can be changed).
The closest that one can come to semi-automation would be to drag any/all Effects to, say the first Clip, and make any settings changes there. When you are satisfied with the Effects and their settings, Rt-click on it an choose Copy. Select all other Clips to which you would want the same Effects and settings applied (Lasso'ing them will work in most cases) and once Selected, Rt-click on these, choosing Paste Attributes. Done.
Consider the number of Effects that ship with PrPro, plus the common ones that folk add. There are no enough possible key combos to cover half of them, even if you remapped everything to just Effects. Unfortunately, PrPro (unlike PS) does not do scripting.
Good luck,
Hunt -
Is it possible to apply a condition on a single column?
Morning All,
Is it possible to apply a condition on a single column? My aim is to create a report that has multiple PTD columns, each based on a different Version ID.
I've tried creating a calculation using the case statement shown below, however I get a blank column with nothing in: CASE WHEN VERSION_ID = ‘10’ THEN BALANCES.PTD END
I know this can be done through a DB view/custom folder, however I’m looking for a solution that can be created in Desktop / Plus.
Cheers,
LanceOK. Hope this explains the problem well.
This is the Crosstab Report without Annual Budget Column which looks great, all figures correct.
http://vodashare.com/show.php/2929_Pic1.jpg
After Adding Annual Budget column,
http://vodashare.com/show.php/2930_Pic2.jpg
This is the Table version of the above report with Annual Budget column
http://vodashare.com/show.php/2931_Pic3.jpg
Calculation Used for Annual Budget is
SUM(( CASE WHEN ( ( Actual Flag = 'B' ) AND ( Status <> 'C' ) )
THEN ( NVL(Period To Date Cr,0)-NVL(Period To Date Dr,0) )
ELSE 0 END ))
OVER(PARTITION BY Account,"Period Year" )
According to the conditions ( Actual Flag = 'B' ) AND ( Status <> 'C' ), amount is calculated adding the (Cr – Dr) amount when these conditions are satisfied. But, How can I make sure the value is displayed only for rows that these conditions are satisfied?
As you can see, it also displays the columns where Actual Flag != 'B' and Status = ‘C’
Also, I wonder why the Crosstab worksheet with Annual Budget doesn’t display some of the amounts (Ex: for Account 301010, no Annual Budget is displayed where as in Tabular worksheet it is $5721017.50) and for the amounts displayed, why are they displayed at different levels of Sub Accounts?
Note: I do get a warning when I Add the Annual Budget to worksheet.
'You are combining a detail data point with an aggregate data point This may give you unexpected results'. But I am not using any detail items as data points.(not considering Status and Actual Flag, got same message even after removing those)
Please let me know if you find a solution for your requirement Lance, that would help me. -
AP - Is it possible to apply a Deposit to an Invoice via a API or Interface
Hi,
Some knows if it's possible to apply deposit trough an API or during the invoice interface process?
Oracle EBS R12.1
Thanks in advance for the feedback.Try AR_DEPOSIT_API_PUB.
Regards,
Gareth -
It is possible to apply redo while the standby is open in read only mode ?
Hi,
I am using Oracle 11g R2 (11.2.0.1.0)
Step 1: Two node RAC is Configured.
Step 2: One node Data Guard RAC is configured.( i,e Standby is one node RAC).
Primary:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ WRITE PRIMARY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
Standby:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
Question:
I have not purchased active dataguard license.
In my case In Data Guard RAC it is possible to apply redo while the database is open in read only mode?
Thanks
Solaiman876149 wrote:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
"READ ONLY WITH APPLY" in V$DATABASE.OPEN_MODE means Active Data Guard is enabled.
Oracle code cannot check if you have the right license: it is up to you to know which license you have for your database environments. -
Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian. -
Why are my still images Blurry when applying effects?
I am creating a slideshow video using images with up to 18mp. The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning.
I am a user of both CS5.5 at work and newly acquired CS6 for home. I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects. Should I be applying effects differently? or what?
Thanks,
G>Didn't mean to start an argument
= Little Devil with a Grin !!!
Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
Personal example...
Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
That process works just fine for me... other people want to figure out their own math for the PPro export settings
I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way -
Everything in iMovie HD 6 seems to work fine apart from not being able to apply effects. I've tried most of the effects. I have no problems changing settings. It even renders or looks like it's rendering but nothing changes with the clip. It's the same as it was before.
Can anyone help?same thing.
had my imac harddrive replaced and now the quartz composer effects dont work. I've been researching for the past 3 hours. Does anyone have the answer to this.
I'm led to believe it has to do with not having the latest codecs? or something is off with my quartz composer (tho i see it renderin in preview) or this is just a bug that no one has the answer to.
won't somebody help georgieporge and I? -
Is it possible to apply putClientProperty() to the entire GUI?
Is it at all possible to apply something like: putClientProperty to the entire GUI rather then a specific object?
I dislike the java style, and prefer to have my layout as the windows style, but don't know how to do this rather then setting each gui element to windows style...try {
UIManager.setLookAndFeel(
UIManager.getSystemLookAndFeelClassName());
} catch (Exception e) {}This should change Swing UI to Windows Look & Feel (if your runing on windows).
Maybe you are looking for
-
[SOLVED] Did update - MPD doesn't work
I recently did a large pacman -Syu and while I don't remember all of the packages, I do remember that gnome3 was in there. I've heard that gnome3 has pulseaudio as a dependency which could be why it was pulled along somehow. I don't know if it's this
-
I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to
-
I've increased the maximum number of buffers to higher than I need, but I still cannot acquire more than 139 images with the Duncan Tech digital video camera before I get a memory lock error. Is there any way to increase the number of images I can ac
-
CSS Popup menu export problems
I have followed all the instructions to export css popup menus from Fireworks CS3. I can see them when I preview in browser from the launch button top right. But when I export the CSS etc. and view the files in Dreamweaver it simply doesn't make any
-
Accept terms and conditions of iTunes
When I try and accept terms and conditions at iTunes no accept button comes up.